Changes in 2.7.4 (2026-06-22)

    * The speed of expireover has been greatly improved by the
      implementation of a Bloom filter (a probabilistic data structure used
      to efficiently test whether an element is a member of a set, without
      any false negative).  Instead of checking every article in the
      overview database against the history file to detect orphaned entries,
      expireover now sequentially reads the history file at startup to build
      a Bloom filter, and makes its checks in that optimized data structure.
      On large news spools of billions of articles, expireover could take
      several weeks to complete; it now runs in a few minutes!  This feature
      is activated by default and controlled by the new *expirebloomfp*
      parameter in inn.conf.  Many thanks to Kevin Bowling for this
      improvement.

    * The speed of expire has also been drastically improved for large news
      spools thanks to the recording of every cancellation alongside the
      existing storage and overview deletions, so that expire can just drop
      matching history entries without doing per-article retrieval system
      calls, thus saving a good amount of time at billion-article scale. 
      This feature contributed by Kevin Bowling is not enabled by default. 
      See the documentation of *expiretombstone* in inn.conf for more
      details, as well as *nnrpdcheckart* which also makes use of the cancel
      tombstone log file.

    * Added four new parameters to ovsqlite.conf for the ovsqlite overview
      method: *mmapsize* to have SQLite read data via mmap instead of
      copying into its own page cache, *readercachesize* to set the SQLite
      in-memory page cache size for each nnrpd reader process, *walmode* to
      enable SQLite's Write-Ahead Logging journal mode and improve read
      performance when multiple nnrpd processes access the overview database
      simultaneously, and *walcheckpointthreshold* to parameterize when to
      perform checkpoints.  See the ovsqlite(5) manual page for more
      details.  Thanks to Kevin Bowling for all these enhancements!

    * When *laxmid* is set in the *syntaxchecks* parameter in inn.conf,
      Message-IDs without any "@" character are now accepted by innd.

    * Fixed very infrequent errors of memory mapping when updating the
      active file or using the tradindexed overview method, as well as when
      updating the history file with *nfswriter* set to true.  Thanks to
      Chris Knipe for the bug report and to Richard Kettlewell for the
      patch.

    * Fixed the rotation of the perl-nocem.log file generated when syslog is
      not available or the -l flag used with perl-nocem: the contents of
      this log file was mistakenly appended to news.notice by scanlogs.

    * Fixed makehistory so that malformed input does not insert a bogus
      overview entry.  Thanks to Kevin Bowling for the patch.

    * Following upstream rename from blacklist to blocklist, the
      --with-blacklist configure flag is renamed --with-blocklist for
      blocklistd support in FreeBSD 15 and NetBSD 10.  For backward
      compatibility, both blacklist and blocklist libraries will be searched
      by the new --with-blocklist flag.  Thanks to Jose Luis Duran for the
      information.

    * Added support for the ALPN TLS extension in nnrpd.  Thanks to Roman
      Donchenko for this feature.

    * In consequence of the changes in the libinn(3) and libinnstorage(3)
      interfaces for the Bloom filter and overview improvements, both of
      these libraries have their SONAME bump in this release.

    * Various other minor bug fixes and documentation improvements.

Changes in 2.7.3 (2025-05-09)

    * An up-to-date moderators file is provided with this release.  It
      basically removes the records of defunct hierarchies.  You may want to
      manually update your configuration with the new file.

    * actsyncd now supports fetching a remote active file from a web site,
      using the HTTP or HTTPS protocols.  Two new keywords, *path* and
      *protocol*, permit parameterizing that in the actsync.cfg
      configuration file.  See the actsync(8) manual page and the updated
      actsync.cfg sample file for more details.

      If you are currently using actsyncd to synchronize your active file
      with the one of an FTP server, please check that FTP access is still
      working and the remote active file is up to date.  You are otherwise
      encouraged to update your actsync.cfg configuration file to use an
      HTTPS access.  Just adding "protocol=https" may be enough.  The
      rationale behind that is the fact that FTP servers are considered less
      secure nowadays; FTP access to "ftp.isc.org" is doomed to be shut down
      one day in favour of HTTPS.  The updated actsyncd and simpleftp
      programs shipped with INN go along with the upcoming change.

    * simpleftp, only used by actsyncd, now supports fetching files from web
      servers, using the HTTP(S) protocol.  It now also correctly parses a
      port number following a hostname (separated by a colon), and
      establishes FTP sessions in passive mode as this mode works better
      behind firewalls and NAT configurations.

    * Added bzip2 support to actsyncd to uncompress downloaded active files.

    * Fixed syntax warnings in the default filter_innd.py Python hook so
      that innd no longer logs errors with Python 3.12 and greater.  Thanks
      to Roberto Corrado for the patch.

    * The check for a fully qualified domain name for the local host at
      startup still produces a warning in the logs but is no longer fatal. 
      The installation of INN was otherwise failing under some circumstances
      like when creating a Docker image.  Additionally, the INN_HOSTNAME
      environment variable, if set and fully qualified, is now taken by INN
      as the hostname.

    * Several improvements have been made to readership statistics reported
      by innreport: IPv6 addresses are now correctly recognized and reported
      as unresolved instead of unknown, statistics by domain are at a better
      granularity, totals are correctly computed, and only the top 100
      entries are displayed by default instead of a possibly very long
      exhaustive list.

    * Fixed the computation of idle time in the nnrpd timers gathered by
      innreport, and the display of non-printable characters in the section
      about unrecognized NNRP commands.  The wording and the case of the
      section titles are also more homogenized.

    * Fixed the handling of empty Message-IDs in perl-nocem.  Instead of
      dying, it now just discards these invalid entries.

    * Improved Perl code readability and quality by enforcing the most
      interesting and useful "Perl::Critic" policies.  A new "make
      code-check" command has been added to run the checks against the
      source code.

    * Spelling fixes in documentation.  Thanks to Christian Clauss for the
      run of codespell.

    * Move the manual pages of delayer, shlock and sm to section 8 (system
      administration commands) instead of section 1 (user commands).

    * Update from GNU Libtool 2.4.7 to 2.5.4.

Changes in 2.7.2 (2024-06-22)

    * Up-to-date control.ctl and nocem.ctl files are provided with this
      release.  You may want to manually update your configuration with the
      new information recorded about hierarchies and NoCeM issuers, and make
      sure the relevant PGP keys are installed on your system.

    * Added a new *ovflushcount* parameter in inn.conf, defaulting to "50",
      to parameterize the number of articles received between flushing their
      overview data to disk, when using the buffindexed overview storage
      method.  (In previous releases, that number was ten times the value of
      *icdsynccount*, but a dedicated parameter is better.)

    * Added the "INN::ovsqlite_client" Perl module to access an ovsqlite
      overview database through ovsqlite-server from a Perl script.  This
      module provides search, add, remove and expire functions for
      information stored in an ovsqlite database (newsgroups and overview
      data associated to articles in these newsgroups).  Many thanks to Bo
      Lindbergh for it, as well as for two samples in the contrib directory
      (ovsqlite-dump and ovsqlite-undump) showing how to use the module.

    * Added two new options in storage.conf, contributed by Christoph Biedl:

      * a *filtered* option to store articles which have been rejected by a
        Perl or Python filter for innd into a separate storage class, when
        *dontrejectfiltered* is set to true in inn.conf;

      * a *path* option to store articles by the contents of the Path header
        field, notably to isolate the storage of spammy sites from other
        sites.

    * The delayer program, which previously was in the contrib directory, is
      now installed by default.  It notably permits generating a delayed
      feed, for instance to give cancel control articles and NoCeM messages
      time to arrive, and therefore actually cancel articles before they are
      locally stored.  Thanks to Christoph Biedl for the documentation,
      testing, and addition of several useful flags to delayer.

    * innreport now supports high-precision timestamps like
      "2023-07-29T04:15:01.889064+02:00" that syslog can be parameterized to
      use; daily Usenet reports otherwise indicated all these logs as
      unknown entries because a format like "Jul 29 04:15:01" was expected.

    * innreport now alphabetically sorts lines which have the same rank
      instead of displaying them in random order.

    * scanspool now detects empty files in a tradspool news spool and
      directories with an all-digit component (which may conflict with a
      possible file with the same name), correctly parses continuation lines
      in header fields, and can automatically remove articles reported to
      have a problem (when run with the new -r flag).

    * Added several new options to better parameterize perl-nocem.  The
      location of its configuration file, the keyring to use, and the full
      gpg and gpgv commands to run can now be modified by flags passed to
      the program.  Unprocessed NoCeM notices will also show up in daily
      Usenet reports generated by innreport.  Log verbosity can be
      controlled, cancelled articles can be backed up into files, and
      perl-nocem can write logs to a separate perl-nocem.log file.  Local
      rules to fine-tune within a NoCeM notice which articles get cancelled
      can also be applied.  See its manual page for more information about
      the use of these options.

    * perl-nocem now correctly parses the identifiers of NoCeM issuers with
      special characters like "+" in the configuration file.

    * Fixed a hang when posting articles if COMPRESS DEFLATE is active but
      TLS is not.  Thanks to Enrik Berkhan for the patch for nnrpd.

    * innd no longer dies when "ctlinnd trace" is run on an invalid channel.

    * INN now properly handles header field names starting with a leading
      dot: innd accurately computes the ":bytes" metadata item of articles
      with such header field names, and nnrpd correctly preserves the
      leading initial dot at injection time and rightly parses such header
      field names in HDR, XHDR and XPAT commands.

    * nnrpd now rejects articles with invalid dot-stuffing (that is to say
      when a dot at the beginning of a line is not doubled) as it is a
      violation of the NNTP protocol.  (innd still goes on accepting and
      propagating such articles as they have already been injected and
      propagated.)

    * Fixed the computation of the Bytes header field by pullnews (in
      header-only mode with the -B flag).

    * Fixed the generation of rnews batches by pullnews (when using the -r
      flag) which had not the expected native LF line termination.

    * Fixed inndf on 32-bit architectures with large file support
      (previously, inndf could not count more than 2^32 bytes or inodes on
      these architectures).

    * Fixed an issue preventing articles from expiring when using the
      ovsqlite method, in a very rare case.  When an article had more than
      100,000 bytes of overview data (for instance with a Subject header
      field of that length), overview expiration was no longer done for
      newsgroups carrying this article.  Such articles, which most certainly
      are spams anyway, are no longer added to the ovsqlite database. 
      Thanks for Jesse Rehmer for the bug report.

    * Fixed a database lock issue when running ovsqlite-util on a running
      server with the *transtimelimit* parameter in ovsqlite.conf set to a
      higher value than the default busy timeout of 30 seconds of
      ovsqlite-util.  Thanks to Jesse Rehmer for the bug report and Bo
      Lindbergh for the fix.

    * Fixed a foreign key issue preventing ovsqlite-util from fixing
      problems found when running with the -F flag.

    * innd no longer malfunctions nor throttles when the maximum number of
      file descriptors supported by the system is reached.  If needing to
      use more file descriptors than the default system limit, a new
      "LARGE_FD_SETSIZE" option can be set at build time.  See the
      documentation for *rlimitnofile* in inn.conf for more information. 
      Thanks to Jesse Rehmer for the bug report.

Changes in 2.7.1 (2023-04-16)

    * Added a new *groupexactcount* parameter in readers.conf to force nnrpd
      to report the exact number of still existing articles in newsgroups
      instead of an estimated count.  When the estimated number of articles
      is strictly below *groupexactcount* (set to "5" by default), nnrpd now
      recounts them and reports the actual value (articles that have been
      cancelled or overwritten in self-expiring CNFS buffers may otherwise
      still be counted in the estimate).  News clients will then be directly
      aware of empty newsgroups; they would otherwise have tried to retrieve
      possible articles, to finally not show anything to the user.

    * Programs sending mails now include, when appropriate, an
      Auto-Submitted header field in the message headers (either set to
      "auto-generated" or "auto-replied", following the recommendation in
      RFC 3834).  Thanks to Harald Dunkel for this suggestion which will for
      instance help to avoid unnecessary vacation replies.

    * Added a new -a option to innmail to specify additional header fields
      to add in the headers of messages.  This is notably used to internally
      support the addition of the Auto-Submitted header field in outgoing
      mails.

    * Added new ovsqlite-util program to perform some basic consistency
      checks and dump operations on an overview database using the ovsqlite
      method.  More checks and features will be added in future releases. 
      You'll need the "DBI" Perl module with the "DBD::SQLite" driver
      installed on your system to use this program.

    * Added TLS support in pullnews for connections to upstream servers
      configured in pullnews.marks, and to the downstream server in the
      existing -s flag.  A port can now also be specified for connections to
      upstream servers (it was already possible for the downstream server
      only).

    * Added a new -L option to pullnews to specify the largest wanted
      article size in bytes.  Articles whose size exceeds that value will no
      longer be downloaded by pullnews.

    * pullnews now detects a socket timeout while downloading articles from
      a remote peer.  The download gracefully stops, and another attempt can
      be automatically made according to the setting given with the -t flag.
      Thanks to Jesse Rehmer for the bug report.

    * Fixed the generation and the handling of storage tokens on wrapped
      CNFS buffers, thanks to bug reports from Kamil Jonca:

      * Duplicate entries were returned by makehistory on fully wrapped
        cyclic buffers (the first article of the cyclic buffer appeared
        twice in the output).

      * The first article of a fully wrapped cyclic buffer was removed too
        soon from history (expire wrongly thought its storage token was no
        longer existing after a wrap).

      * The first article of the previous cycle number of a cyclic buffer
        containing articles from two different cycle numbers was wrongly
        considered by makehistory to belong to the current cycle number.

    * innd no longer dies when a newsfeeds entry has an unexpected trailing
      whitespace.

    * The size of duplicated articles was counted twice in totals, average
      article sizes and graphs by innreport, when parsing innd checkpoints. 
      Thanks to Hauke Lampe for the patch to count it only once.

    * Customizing the domain part of Message-IDs generated by nnrpd and the
      server name indicated in Injection-Info header fields is now easier:
      the *domain* parameter in the access blocks of readers.conf can be
      directly used (without needing to set *virtualhost* as it was
      previously the case).

    * If the *domain* parameter is set in inn.conf or in a readers.conf
      access block, and has invalid characters, or if the fully qualified
      domain name (FQDN) of the news server has invalid characters when
      *domain* is unset, a fatal error is now reported at startup.  It is a
      basic configuration error which otherwise leads to the generation of
      invalid article Message-IDs.

    * Improved the speed of article searches with HDR, LAST, NEXT, and XPAT
      commands when there is a (huge) gap in article numbers.  On newsgroups
      with several millions of consecutive missing articles (which is a rare
      situation), these commands could take several seconds to run.

    * Incoming articles in newsgroups that have exceeded the maximum number
      of articles they can contain (2^31-1) are now correctly rejected.  INN
      was otherwise happily accepting them but either numbers returned in
      NNTP responses were not right, or some news clients choked when
      receiving unexpected large article numbers.  (The current version of
      the NNTP protocol only allows article numbers up to 2^31-1.)

    * Fixed the renumbering of reported low water marks for empty newsgroups
      in active after overview expiration, when using the ovsqlite method. 
      They were set to 1 for empty newsgroups whereas they were not supposed
      to decrease.  (These reported low water marks regained their expected
      values during the next overview expiration, provided that the
      newsgroup was no longer empty.)

    * The reported high water mark of empty newsgroups is now correctly set
      to one less than the reported low water mark in overview data. 
      (Previously, the reported low water mark was set to one more than the
      reported high water mark.)

    * Fixed the output of the "ctlinnd feedinfo ''" command that was
      returning information only for the first site, and the output of the
      "ctlinnd name channel" command that was returning partial information
      for the requested channel.

    * The build of external programs which include inn/storage.h was failing
      because of the unexpected inclusion of config.h in one of the included
      headers.  Also, a few Autoconf results were not correctly made
      available to external programs.  This is now fixed.

    * Fixed the build on systems whose default shell does not completely
      meet the Posix standard.  A few build scripts were run with the
      default shell instead of the one found by Autoconf and afterwards used
      for INN.

    * Use standard daemon(3) C function, when available, to daemonize innd,
      nnrpd, ovdb_server and ovsqlite-server instead of an INN-specific
      function.

Upgrading from 2.6 to 2.7

    The following changes require your full attention because a manual
    intervention may be needed:

    * The *require_ssl* parameter in readers.conf has been renamed to
      *require_encryption* as it applies to any kind of encryption layers,
      including TLS and SASL security layers.  Since innupgrade only takes
      care of the change in the file named readers.conf, you will have to
      manually rename that parameter in configuration files for nnrpd with
      an alternate name.

    * The innreport.conf file in *pathetc* has been split into a general
      configuration file (innreport.conf itself) and a display configuration
      file (innreport-display.conf in *pathlib*).  If you made local changes
      in sections other than the *default* section in innreport.conf, and
      wish to keep them, then you need renaming the new
      innreport-display.conf file to another name in *pathlib*, setting this
      local file name in the new *display_conf_file* option in
      innreport.conf, and re-applying your local changes to that local
      display configuration file.

      As a matter of fact, the default display configuration file would
      otherwise be overwritten each time INN is updated.  Bug fixes or
      enhancements are made from time to time to the display configuration
      of innreport, and previously couldn't be automatically be merged in
      innreport.conf on update.  This new separate configuration file to
      parameterize the display will now permit an automatic update (if of
      course you use the default display configuration file).

    * A new inn-secrets.conf configuration file has been added in *pathetc*.
      The intent is that, from now on, new secrets used by INN are added to
      that file, and that all secrets currently stored in several other
      configuration files eventually move to that file.  Make sure it is
      properly created during the upgrade, and not world-readable.  It
      currently only stores the secrets used for the new Cancel-Lock
      functionality.

    * The -C flag given to innd to disable the execution of cancels has been
      deprecated and is no longer taken into account (an error message will
      be present in your logs if innd is started with it).  Instead, a new
      parameter has been added in inn.conf to tune the types of cancels innd
      should process.  If *docancels* is set to "require-auth", which is the
      default if INN has Cancel-Lock support, only articles originally
      protected by the Cancel-Lock authentication mechanism can be withdrawn
      by a valid authenticated cancel article or a valid authenticated
      supersede request.  Withdrawals of articles not originally protected
      by Cancel-Lock will not be executed.  See inn.conf(5) for more details
      about the different values of the new *docancels* parameter, and make
      sure to parameterize it according to your needs.

    * The *refusecybercancels* and *verifycancels* parameters have been
      removed from inn.conf.  The first was performing an inefficient and
      inexact check (that should be done, if wanted, in the special "ME"
      entry in newsfeeds, or even better, ask your peers not to feed you
      articles with "cyberspam" in the Path header field body); the second
      check performed on the newsgroups present in cancel articles was not
      useful in innd (this check is relevant to posting agents).

      The related lines in inn.conf will be commented by innupgrade during
      the upgrade.

    * The XBATCH command is no longer enabled by default in innd.  You'll
      have to explicitly enable that capability by setting the new *xbatch*
      parameter to true in incoming.conf for the peers sending you such
      compressed batches.

    * The *nolist* and *noresendid* parameters in incoming.conf have been
      respectively renamed to *list* and *resendid* (and the meaning of
      their related boolean values is now the opposite).  Besides, the
      unused *comment* and *email* parameters in incoming.conf have been
      removed.  innupgrade will take care of the changes (inverting the
      boolean values, and commenting the lines with removed parameters).

    * filechan is no longer shipped with INN; it was just a simple version
      of buffchan.  All calls to "filechan" will be changed to "buffchan -u"
      (for its unbuffered mode) in newsfeeds by innupgrade.  If you have
      local scripts running filechan, you will have to manually take care of
      the change.

    * send-nntp is no longer shipped with INN.  If you have local scripts
      running it, you will have to manually adjust them to use nntpsend
      which basically does the same thing, better.  Or, even greater, use
      innfeed if that is possible.

    * Wrappers around old Perl and Python authentication and access hooks,
      pre-dating INN 2.4.0 and identifiable by the *nnrpperlauth* and
      *nnrppythonauth* parameters in inn.conf, are no longer shipped as
      samples in INN releases.  If not already done, you should either
      replace old hooks with new modern hooks or use the possibilities that
      readers.conf and regular authenticator and resolver programs offer.

    * The libauth.h header file and the libstorage library have been renamed
      to libinnauth.h and libinnstorage to homogenize their name with
      existing libinnhist library.  External programs building or linking
      against them need a manual change.

    If you are upgrading from a version prior to INN 2.6, see also
    "Upgrading from 2.5 to 2.6".

Changes in 2.7.0 (2022-07-10)

    * Upgrading to a major release is a good time to ensure that your
      configuration files, that are usually kept untouched during normal
      updates, are up-to-date: notably control.ctl (with your local changes
      in a separate control.ctl.local file), new better default values in
      inn.conf and innfeed.conf, improvements in innreport.conf (along with
      innreport-display.conf) and innreport.css, fixes in innwatch.ctl,
      updated moderators and nocem.ctl files.

      You may also want to check that the PGP keys used to verify the
      signature of control articles and NoCeM notices are still up-to-date
      and working.  The keys of a few hierarchies and NoCeM issuers have
      recently changed.

    * Bo Lindbergh has implemented a new overview storage method based on
      SQLite, known for its long-term stability and compatibility.  Robust
      and faster at reading ranges of overview data, but somewhat slower at
      writing, this new SQLite-based method is a perfect choice to store
      overview data.

      To select it as your overview method, set the *ovmethod* parameter in
      inn.conf to "ovsqlite".  Details about ovsqlite, the ovsqlite.conf
      configuration file and how to switch to that new modern overview
      storage method can be found in the ovsqlite(5) and makehistory(8) man
      pages.

    * Julien Elie has implemented Cancel-Lock support in innd and nnrpd,
      based on RFC 8315 and libcanlock.  A new inn-secrets.conf
      configuration file has been added in *pathetc* wherein you can set the
      secrets to use for Cancel-Lock.  See the inn-secrets.conf(5) man page
      for more details.

      A new -F flag is recognized by innconfval to indicate the type of file
      to parse (by default, "inn.conf"); just run "innconfval -F
      inn-secrets.conf" to get the values of that new configuration file. 
      Another new flag, -f, permits specifying another file name to parse
      than the standard one.

      The *addcanlockuser* parameter has been added in readers.conf to
      deactivate the generation of user-specific hashes when several
      different posters have the same identity in an access group.  This
      parameter also permits setting whether the hash, when generated, is
      based on the username or the (static) IP of the connection.

    * Added a new tool, gencancel, to help the news administrator generate
      authenticated cancel control messages, with the expected admin
      Cancel-Key hashes.  See the gencancel(1) man page for more details.

    * A new *docancels* parameter has been added in inn.conf to define which
      types of cancels innd should process.  The -C flag given to innd is
      deprecated in favour of that new parameter (you'll see in your logs
      the message "innd -C flag has been deprecated and has no effect; use
      docancels in inn.conf" in case you're passing that flag to innd).

    * Andreas Kempe has implemented blacklistd support in nnrpd.  This
      daemon, available notably in FreeBSD and NetBSD, can be used to
      prevent brute force attacks by blocking attackers after a number of
      failed login attempts.  When nnrpd is run with the new -B flag, and
      INN has been configured with the new --with-blacklist option, it will
      report login attempts to the blacklistd daemon for potential blocking.

    * Building INN with TLS support using LibreSSL is now supported (only
      OpenSSL was previously officially supported and tested).

    * Fixed the parsing of *hosts* and *localaddress* parameters in
      readers.conf; exclusion patterns (beginning with "!") have not been
      working since INN 2.5.0.

    * Improved the robustness of innxmit when receiving "500" or "501"
      response codes from peers, indicating they do not understand the NNTP
      command or (wrongly) think there is a syntax error.  Richard
      Kettlewell added a proper handling of these responses, making innxmit
      dropping the refused article instead of keeping sending it over and
      over (and thus receiving each time the same error in response codes).

    * innreport now collects statistics from innxbatch and generates a
      section for them in its reports.

    * The innreport.conf file in *pathetc*, previously containing almost
      2500 lines, has been split into a general configuration file
      (innreport.conf itself, still in *pathetc*, with about 60 lines) and a
      display configuration file (innreport-display.conf, a new separate
      file in *pathlib*).  The name of this display configuration file can
      be parameterized in the new *display_conf_file* option in
      innreport.conf.

    * The -m flag given to mailpost now sets a List-ID header field instead
      of a Mailing-List header field.

    * rc.news, used to start and stop INN daemons, now checks whether it is
      run as the news user.  It will exit if not the case, to ensure not to
      tamper with the ownership of files INN manipulates.

    * filechan has been removed; it was just a simple version of buffchan,
      which should now be used.

    * send-nntp has been removed; it was just a simple version of nntpsend,
      which should now be used (or, even better, innfeed).

    * The *refusecybercancels* and *verifycancels* parameters have been
      removed from inn.conf.  Besides, inews no longer checks if the From or
      Sender header fields of a cancel or supersede request match the ones
      of the original article being withdrawn.  All of these were either
      inefficient or inexact checks.

    * The *xbatch* parameter has been added in incoming.conf to enable the
      XBATCH command in innd for specific remote peers.  The default is to
      disable the capability.

    * The *nolist* and *noresendid* parameters in incoming.conf have been
      respectively renamed to *list* and *resendid* (and the meaning of
      their related boolean values is now the opposite).  Besides, the
      unused *comment* and *email* parameters in incoming.conf have been
      removed.

    * inews no longer adds a Sender header field nor overwrites an existing
      one in articles it processes if the new -P flag is used.  The Path
      header field, if unset, no longer systematically contains the path
      identity of the local news server (you may want to add it manually
      with the -x flag, if needed).  Finally, inews also no longer adds the
      obsolescent Lines header field.

    * A new -E flag can now be given to inews to silently discard empty
      articles, instead of bailing out with an error.  Another new -m flag
      permits setting the Message-ID instead of letting inews generate one. 
      And a third new flag, -Y, forces inews to authenticate to the remote
      news server even if not asked to.

    * signcontrol has been removed as it embeds per-site configuration which
      is overwritten each time INN is updated to a newer version, and it is
      unlikely you ever need it.  Nonetheless, if you need to issue
      PGP-signed control messages, you can still download it from
      <https://ftp.isc.org/pub/pgpcontrol/>.

    * Support in controlchan for obsolete *sendsys*, *senduuname* and
      *version* control messages has been removed.  These control messages,
      long been deprecated, should no longer be sent nor honoured nowadays. 
      Besides, the "doifarg" keyword in control.ctl is no longer recognized
      (it was only used for these three kinds of control messages).

    * The *require_ssl* parameter in readers.conf has been renamed to
      *require_encryption*, which is a better name as it applies to any kind
      of encryption layers, including TLS and SASL security layers.

    * Fixed the use of a deprecated API in Kerberos V5.  INN now requires
      version 1.6.1 or higher of MIT Kerberos v5 to build.

    * The libauth.h header file and the libstorage library have been renamed
      to libinnauth.h and libinnstorage to homogenize their name with
      existing libinnhist library.

    * All of the applicable bug fixes from the INN 2.6 STABLE series are
      also included in INN 2.7.

Changes in 2.6.5 (2022-02-18)

    * A new step in INN development has been achieved with the migration of
      the INN project to GitHub.  We now make use of the features GitHub
      provides: issue tracker, pull requests, continuous integration, a
      user-friendly interface to browse the code, etc.  Our Subversion
      repository has therefore been migrated to Git, and our Trac tickets to
      the GitHub issue tracker.

    * An up-to-date nocem.ctl file is provided with this release.  You
      should manually update your nocem.ctl file with the new information
      recorded about NoCeM issuers, and make sure the right PGP keys are
      present on your system.

    * Up-to-date control.ctl and moderators files are provided with this
      release.  You should manually update them (notably for the fido7.*
      hierarchy).

    * Added a stricter validation of article numbers given in NNTP commands
      so that numbers superior to 2^31 are correctly considered invalid. 
      Thanks to Richard Kettlewell for the patch.

    * Added a check in rc.news for the existence of the *pathrun* directory.
      INN won't start until this directory is writable.  Previously, it
      bailed out quickly after starting, without clear logs about why it
      failed.

    * Fixed parallel builds using "make -j".  Thanks to Richard Kettlewell
      for the path.

    * nnrpd now properly gathers timer statistics when a compression layer
      is active.

    * nnrpd now properly discards data received from a news client after a
      timeout when a TLS layer is active.  It previously tried to read
      incoming data before closing the socket, leading to decoding errors
      from an underlying compression or SASL layer.

    * innfeed and ovdb_stat now generate status reports in valid HTML
      syntax.

    * Fixed a bug in the buffindexed overview that prevented it from working
      on several systems, amongst them FreeBSD.  Unsupported, and useless,
      permission bits were given to semaphores.

    * Fixed the detection of library paths at configure time: multilib
      directories (lib32 or lib64) are now also used if they exist, even if
      the system does not use multilib.  It will notably fix the detection
      of the OpenSSL 3.0.0 library.

    * The *tlscertfile* parameter in inn.conf now permits the use of a
      complete certificate chain, instead of necessarily having to use
      *tlscafile* for additional certificates.

    * Added support for the new OpenSSL 3.0.0 API, which deprecated a few
      functions.

    * The inn.conf default value for *tlsprotocols* no longer contains TLS
      versions 1.0 and 1.1, which have been deprecated by RFC 8996.

    * A new inn.conf parameter has been added to tune the length of the
      queue of pending connections to innd, nnrpd and the "ovdb" overview
      storage method: the *maxlisten* parameter now permits configuring
      their listen backlog, whose previously hard-coded values were "128"
      for nnrpd and "25" for the others, which was not high enough for some
      uses.  The default value is now "128" for all of them, and
      configurable in inn.conf.  Thanks to Kevin Bowling for the patch.

    * The name of seven man pages for routines built in libinn(3) are now
      prefixed with libinn_ so as not to consume namespace and conflict with
      other packages (notably, the list(3) and uwildmat(3) man pages are now
      named libinn_list(3) and libinn_uwildmat(3)).

    * Other minor bug fixes and documentation improvements, notably a
      revised installation checklist and a section summarizing the most used
      configuration at the beginning of a few complex man pages.

Changes in 2.6.4 (2021-01-21)

    * Added support for systemd notifications and socket activation.  Use of
      more features provided by systemd, including more notifications, will
      come in future releases.  Thanks to Marco d'Itri for this first
      systemd integration into INN.

    * nnrpd now adapts the length of the DH parameter used during a DHE key
      exchange so as to comply with the security level OpenSSL 1.1.0 or
      later expects.  Thanks to Michael Baeuerle for the bug report.

    * cnfsstat now also returns information about retired CNFS buffers:
      buffers mentioned in cycbuff.conf as a cycbuff but not declared in a
      metacycbuff.

    * Switch default innreport behaviour to the common practice of
      externalizing CSS into a separate file.  Its name can be configured
      with the *html_css_url* parameter in innreport.conf.  If this
      parameter is unset, the default innreport.css file name will be used
      and innreport will generate this CSS file for you.  Previously
      generated reports are kept untouched, though, and will still contain
      inline CSS if you had not already set the *html_css_url* parameter in
      previous INN versions.  Thanks to Richard Kettlewell for the patch.

    * sm can now read and store any number of articles given in wire format
      on its standard input when both -s and -R are used.  Only native
      format was previously possible.  Thanks to Bo Lindbergh for the patch.

    * Added new -a flag to rnews to disallow, if needed, the use of
      additional unpackers from the rnews.libexec sub-directory of *pathbin*
      (as set in inn.conf); only "rnews" and "cunbatch" will then be
      recognized as valid batch commands.

    * Added new -b flag to rnews to save rejected articles in the bad
      sub-directory of *pathincoming* (as set in inn.conf).  Otherwise,
      rnews just logs and discards any articles that are rejected or cannot
      be parsed for some reason.

    * Added new -d flag to rnews to log via syslog the Message-ID and the
      Path header body of each article rejected as a duplicate.

    * Added new --enable-hardening-flags configure-time option, enabled by
      default, to use hardening build flags like "-fPIE" and
      "-fstack-protector-strong".  This option can easily be disabled if the
      compiler or the platform does not support them well.  More hardening
      build flags will eventually be added in future releases.

Changes in 2.6.3 (2019-02-07)

    * Fixed the selection of the elliptic curve to use with OpenSSL 1.1.0 or
      later; NIST P-256 was enforced instead of using the most secure curve.

    * A new inn.conf parameter has been added to fine-tune the cipher suites
      to use with TLS 1.3: the *tlsciphers13* now permits configuring them. 
      A separate cipher suite configuration parameter is needed for TLS 1.3
      because TLS 1.3 cipher suites are not compatible with TLS 1.2, and
      vice-versa.  In order to avoid issues where legacy TLS 1.2 cipher
      suite configuration configured in the *tlsciphers* parameter would
      inadvertently disable all TLS 1.3 cipher suites, the inn.conf
      configuration has been separated out.

    * Fixed a regression since INN 2.6.1 that prevented articles with
      internationalized header fields (that is to say encoded in UTF-8) from
      being posted.

    * Support for Python 3 has been added to INN.  Embedded Python filtering
      and authentication hooks for innd and nnrpd can now use version 3.3.0
      or later of the Python interpreter.  In the 2.x series, version 2.3.0
      or later is still supported.

      When configuring INN with the --with-python flag, the "PYTHON"
      environment variable, when set, is used to select the interpreter to
      embed.  Otherwise, it is searched in standard paths.

      In case you change the Python interpreter to embed, make sure that the
      Python scripts you use are written in the expected syntax for that
      version of the Python interpreter.  Notably, buffer objects have been
      replaced with memoryview objects in Python 3, and UTF-8 encoding now
      really matters for string literals (Python 3 uses bytes and Unicode
      objects).

      INN documentation and samples of Python hooks have been updated to
      provide more examples.

    * When a Python or Perl filter hook rejects an article, innd now
      mentions the reason in response to CHECK and TAKETHIS commands. 
      Previously, the reason was given only for the IHAVE command.

    * nnrpd now properly logs the hostname of clients whose connection
      failed owing to an issue during the negotiation of a TLS session or
      high load average.

Changes in 2.6.2 (2018-03-18)

    * A new *syntaxchecks* parameter has been added in inn.conf.  It permits
      controlling the level of checks performed by innd and nnrpd.  Up to
      now, only one check can be enabled/disabled: when *laxmid* is
      mentioned in the values of this new parameter, INN accepts Message-IDs
      that contain ".." in the left part, as well as Message-IDs with two
      "@" (such Message-IDs would otherwise be considered as syntactically
      invalid).  See the inn.conf(5) man page for more details.

      The check is disabled by default (*no-laxmid*), which corresponds to
      the legacy behaviour of INN 2.6.1 and earlier.

    * Use of the ovdb_server helper server is now the default when using the
      ovdb overview method, that is to say the default value for the
      *readserver* parameter in ovdb.conf is now set to true.  It improves
      stability and avoids deadlocks, timing issues and corrupted ovdb
      databases.

    * mailpost now removes empty header fields before attempting to post
      articles, and keeps trace of them in the newly generated
      X-Mailpost-Empty-Hdrs header field body.  Also, mailpost now sanitizes
      header fields with regards to empty continuation header lines.  Thanks
      to Kamil Jonca for these bug reports.

    * A new -z parameter has been added to mailpost to mention a list of
      header fields to remove from the gated message.  Thanks to Dieter
      Stussy for the patch.

    * Fixed a bug in inews that was rejecting articles containing header
      fields whose length exceeded 998 bytes.  This limitation is for the
      length of a single line of a header field (and not for the length of
      the whole header field, as it was wrongly the case).

    * Added support for GnuPG's gpg binary (in addition to gpgv) in
      pgpverify.  Indeed, gpg still validates signatures made with weak
      digest algorithms like MD5 whereas gpgv no longer does.  Thanks to
      Thomas Hochstein for the patch, which permits validating control
      articles for hierarchies that are still using old PGP keys.

    * Added similar support for GnuPG's gpg binary in perl-nocem to validate
      NoCeM notices from issuers who are still using old PGP keys.

    * A few commands listed in the "Control commands to INND" section in
      daily Usenet reports were appearing as a mere letter; all of them are
      now properly converted to meaningful words.

    * The *tlsprotocols* parameter in inn.conf now recognizes the "TLSv1.3"
      value (for OpenSSL versions implementing TLS 1.3, that is to say
      starting from OpenSSL 1.1.1).

    * The buffindexed overview method will now hopefully work properly on
      systems with a native page size larger than 16KB.

    * Other minor bug fixes and documentation improvements.

Changes in 2.6.1 (2016-11-27)

    * nnrpd now uses "-0000" as the time zone for Date and Injection-Date
      header fields it generates.  It was previously using "+0000", wrongly
      systematically indicating a local time zone at Universal Time when
      *localtime* is set to false (which is the default) in readers.conf. 
      The "+0000" time zone will now be used only if *localtime* is set to
      true and UTC is really the local time zone of the server.

    * Julien Elie has implemented in nnrpd the new COMPRESS command
      described in the *draft-murchison-nntp-compress* Internet-Draft that
      extends the NNTP protocol to allow a connection to be effectively and
      efficiently compressed.  News clients that also support that extension
      will be able to benefit from that bandwidth optimization and
      improvement in speed.  Moreover, using COMPRESS is more secure than
      TLS-level compression, as far as authentication credentials are
      concerned.

    * The default value for the *tlscompression* parameter in inn.conf has
      changed.  TLS-level compression is now disabled by default, to comply
      with the best current practices for a secure use of TLS in application
      protocols like NNTP.  Using the new COMPRESS command is recommended.

    * The *tlscompression* parameter in inn.conf now also permits disabling
      TLS-level compression with OpenSSL 0.9.8.  It previously had an effect
      only when OpenSSL 1.0.0 or later was used.

    * rnews no longer segfaults at startup when started setuid news.  Thanks
      to Marcus Jodorf for the bug report.

    * Fixed slow nnrpd responses for a few NNTP commands.  The "TCP_NODELAY"
      option was unconditionally set whereas only BSD/OS systems needed it. 
      Thanks to Christian Mock for having discovered that.

    * Articles containing a Received or a Posted header field are no longer
      rejected by nnrpd at injection time.

    * Articles containing control characters or whitespace-only content
      lines in their headers are now rejected by nnrpd at injection time.

    * OpenSSL 1.1.0 support has been added to INN.

    * When an encryption layer is negotiated during a successful use of the
      STARTTLS command, or after a successful authentication using an SASL
      mechanism that negotiates an encryption layer, nnrpd now updates the
      permissions of the news client according to the new secure state of
      his connection (that is to say auth blocks in readers.conf using the
      *require_ssl* parameter are taken into account).  Previously, only
      connections on a dedicated port (usually 563) were taking benefit from
      that parameter.  Thanks to Steve Crook for the bug report.

    * When a data integrity layer was negotiated during a successful SASL
      authentication, nnrpd was wrongly reseting any knowledge obtained from
      the client, such as the current newsgroup and article number.  This
      behaviour now applies only when an encryption layer is negotiated.

    * nntpsend now correctly waits until all of the child innxmit processes
      exit before it does.  It was causing nntpsend to fail to work properly
      on systems that use systemd, because when it exits prematurely,
      systemd kills all of the processes it launched, including the innxmit
      processes.  Thanks to Jonathan Kamens for the patch.

    * Update from GNU Libtool 2.4.2 to 2.4.6.

    * Other minor bug fixes and documentation improvements.

Upgrading from 2.5 to 2.6

    The following changes require your full attention because a manual
    intervention may be needed:

    * The name and location of the pullnews configuration file have changed.
      It is now pullnews.marks, located in *pathdb* when pullnews is run as
      the news user, or otherwise in the running user's home directory. 
      This file was previously stored in .pullnews in the running user's
      home directory (even for the news user).  If you use pullnews, you
      need to manually move and rename the configuration file; otherwise, it
      will no longer work.  Note that the -c flag passed to pullnews allows
      specifying another configuration file, if need be.

    * The default location of the mailpost database directory has changed
      from *pathtmp* to *pathdb*.  If you use mailpost without an explicitly
      specified database directory (using the -b flag), then you should
      manually move your current database files mailpost-msgid.dir and
      mailpost-msgid.pag from *pathtmp* to *pathdb*.

    * If you have been using TLS/SSL with nnrpd before, be aware that the
      default value of a few inn.conf parameters have changed: the server
      now decides the preferred cipher (instead of the client), and only TLS
      protocols are allowed (using the flawed SSLv2 and SSLv3 protocols is
      now disabled).  If you want to change these settings, the respective
      *tlspreferserverciphers* and *tlsprotocols* parameters can be tuned to
      your needs.

    * The --with-kerberos "configure" flag used to add Kerberos v5 support
      has been renamed to --with-krb5.

    * The --with-berkeleydb "configure" flag used to add Berkeley DB support
      has been renamed to --with-bdb.

    * The --enable-ipv6 "configure" flag no longer exists.  IPv6 is now
      unconditionally enabled, if available.

    * "$HOME" is no longer exported as an environment variable by
      innshellvars, innshellvars.tcl and the Perl module "INN::Config".  It
      was previously overriding the default user home directory with
      *pathnews*.  If you use these scripts in your own scripts, you will
      have to take care of that change.

    * Owing to the implementation of RFC 4643 (AUTHINFO USER/PASS) in innd,
      if remote peers have to authenticate in order to feed articles, they
      now have to send a username (which was previously wrongly optional),
      before sending their password.  The mandatory username, though
      currently unused by innd, can be whatever the remote peer wishes.  In
      previous versions of INN, inncheck was already complaining when
      passwd.nntp contained an empty username associated with a password.

      A manual review of authenticated feeds should then be done so as to
      ensure that they are properly working.

    * The Injection-Date and Injection-Info header fields are now generated
      by nnrpd at injection time instead of the NNTP-Posting-Date,
      NNTP-Posting-Host, X-Complaints-To and X-Trace header fields.  Local
      scripts that were using (for authentication, privacy, etc.) these now
      deprecated header fields should be updated.  Also note that the Path
      header field of locally posted articles can also contain the contents
      of the deprecated NNTP-Posting-Host header field.

    * The two *addnntppostingdate* and *addnntppostinghost* parameters in
      inn.conf have been respectively renamed to *addinjectiondate* and
      *addinjectionpostinghost*.  innupgrade takes care of the modification
      only for inn.conf; a manual change will therefore be needed for
      readers.conf, if these parameters are overridden in this file.

    * The default values of a few inn.conf parameters have changed to make
      use of the vastly expanded storage and RAM commonly available today:
      *datamovethreshold* (from "8192" to "16384"), *msgidcachesize* (from
      "16000" to "64000"), *overcachesize* (from "64" to "128"), and
      *wireformat* (now enabled by default).

      The generation of status reports and performance timings are now also
      enabled by default: *logstatus* and *nnrpdoverstats* parameters, with
      a frequency of 10 minutes (*status* and *timer* parameters).

    * The default value of *max-queue-size* has changed from "5" to "20",
      and *use-mmap* now defaults to true for innfeed.conf.

    If you are upgrading from a version prior to INN 2.5, see also
    "Upgrading from 2.4 to 2.5".

Changes in 2.6.0 (2015-09-12)

    * The NNTP protocol requires a username to be sent before a password
      when authentication is used.  innd was wrongly allowing only a
      password to be sent by authenticated peers.  See the note above for
      more details.

    * The Lines header field is no longer generated by nnrpd at injection
      time.

    * The Injection-Date header field is now generated by nnrpd at injection
      time instead of the deprecated NNTP-Posting-Date header field, when
      *addinjectiondate* is set to true.  Note that *addnntppostingdate* has
      been renamed to *addinjectiondate* in inn.conf.

    * The Injection-Info header field is now generated by nnrpd at injection
      time instead of the deprecated NNTP-Posting-Host (when
      *addinjectionpostinghost* is set to true), X-Complaints-To and X-Trace
      header fields.  Note that *addnntppostinghost* has been renamed to
      *addinjectionpostinghost* in inn.conf.  The Path header field of
      locally posted articles now also contains the contents of the
      NNTP-Posting-Host header field.

    * A new *addinjectionpostingaccount* parameter has been added in
      inn.conf.  When set to true, the Injection-Info header field contains
      an additional *posting-account* attribute that mentions the username
      assigned to the user at connection time or after authentication.  The
      default value for this parameter is false.

    * A few header fields are now considered as obsolete by nnrpd at
      injection time: NNTP-Posting-Date, NNTP-Posting-Host, X-Complaints-To,
      X-Trace, Also-Control, Article-Names, Article-Updates, and See-Also
      header fields.

      Besides, nnrpd will similarly reject obsolete *sendsys*, *senduuname*
      and *version* control messages.

    * The presence of a Subject header field beginning with "cmsg " no
      longer causes an article to be interpreted as a control message by
      nnrpd at injection time.

    * nnrpd no longer differentiates IHAVE from POST.  Articles injected
      with IHAVE are now treated as though they were injected with POST.  It
      means that if the previous behaviour of IHAVE was expected, innd
      should handle itself the connection instead of nnrpd.

    * The name of the pullnews configuration file is now pullnews.marks
      located in *pathdb* when pullnews is run as the news user, or
      otherwise in the running user's home directory.  It was previously
      stored in .pullnews in the running user's home directory (even for the
      news user).

    * Fixed a leak of semaphores when using buffindexed.  Thanks to Richard
      Kettlewell for having fixed the issue.

    * Building with Libtool is no longer optional.  The --enable-libtool
      option to "configure" has been removed.

    * "DESTDIR" and non-root installs are now properly supported and
      documented in INSTALL.  The "make install", "make update" and "make
      cert" steps properly obey "DESTDIR".  Besides, it is no longer a
      requirement that the installation step be done by the superuser, as
      long as the user executing the install has supplied a "DESTDIR" value
      that points to a writable directory, *and* the person or process
      performing the install corrects the file ownerships when INN is
      installed on the system on which it's going to run.  Thanks to James
      Ralston for this support.

    * When building INN with Berkeley DB, Cyrus SASL, Kerberos v5, OpenSSL,
      or zlib support, no longer add standard locations to compiler and
      linker include flags.  Such default paths are now added only if
      explicitly given to one or more of the --with-bdb, --with-bdb-include,
      --with-bdb-lib, --with-sasl, --with-sasl-include, --with-sasl-lib,
      --with-krb5, --with-krb5-include, --with-krb5-lib, --with-openssl,
      --with-openssl-include, --with-openssl-lib, --with-zlib,
      --with-zlib-include, or --with-zlib-lib "configure" flags (the flags
      ending with "-include" and "-lib" are new in INN 2.6.0).

    * If the Berkeley DB, Cyrus SASL, Kerberos v5, or OpenSSL SSL and crypto
      libraries are found at configure time, INN will now be built with
      support for them unless respectively the --without-bdb,
      --without-sasl, --without-krb5, or --without-openssl flags are
      explicitly passed to "configure".

      Note that it was already the default behaviour for zlib support when
      Berkeley DB support was also enabled.

    * The "configure" flag --enable-reduced-depends has been added to
      request that library probes assume shared libraries are in use and
      dependencies of libraries should not be probed.  It therefore tries to
      minimize the shared library dependencies of the resulting binaries on
      platforms with proper shared library dependencies.  This is not
      enabled by default, and is of interest primarily to people building
      packages for distributions.

    * Building INN with Python support now requires the use of Python 2.2.0
      or later as the distutils.sysconfig module used was introduced with
      Python 2.2.0.

    * The INN test suite driver is now fully synchronized with the upstream
      version of the C TAP Harness package maintained by Russ Allbery. 
      Keeping the INN test suite driver up-to-date will be possible thanks
      to a new getc-tap-harness script in the support directory that
      automatically fetches the latest upstream changes.

      Similarly, the new getrra-c-util script permits keeping most of the
      utility and portability functions synchronized with the upstream
      version of the rra-c-util package maintained by Russ Allbery.

    * Other minor bug fixes and documentation improvements.

    * All of the applicable bug fixes from the INN 2.5 STABLE series are
      also included in INN 2.6.

Changes in 2.5.5 (2015-05-23)

    * New inn.conf parameters used by nnrpd to fine-tune the TLS/SSL
      configuration have been added: *tlsciphers*, *tlscompression*,
      *tlseccurve*, *tlspreferserverciphers*, and *tlsprotocols*.  Many
      thanks to Christian Mock for his contribution that permits tightening
      the level of security provided by TLS/SSL.

    * innwatch no longer creates a child process only for sleeping and then
      waits on that process.  The forked-off process only died after it had
      done sleeping, which caused the INN service to drop into maintenance
      state when for instance running under SMF on illumos/Solaris (since
      not all processes die within timeout).  Thanks to Lauri Tirkkonen for
      the patch.

    * innd no longer crashes if a channel is supposed to sleep but does not
      define a waker callback function.  Also, the highest file descriptor
      of sleeping channels is now properly updated.  Thanks to Petr
      Novopashenniy for the bug report.

    * Add new -i flag to both cnfsstat and innwatch to specify how many
      seconds they should sleep at startup.  It will especially be useful in
      rc.news so that these scripts are actually started and then sleep by
      themselves, instead of being started a minute after innd and therefore
      not being properly stopped if "rc.news stop" is invoked during that
      minute.

    * Add new -f flag to innwatch to specify the configuration file to use,
      in case it is not the default innwatch.ctl file.

    * Add new -t flag to mailpost to change, if needed, the default
      directory to use to temporarily store error messages that are sent to
      the newsmaster.  Two paths are now tried by default: *pathtmp* as set
      in inn.conf, and then /var/tmp if *pathtmp* is not writable.

    * When the creation of a newsgroup needed expanding the tradindexed
      group index, an already-running nnrpd was not automatically noticing
      newly created newsgroups.  Richard Kettlewell fixed that issue.

    * Fixed flushing of CNFS buffers when using NFS storage.

    * Fixed how innupgrade is executed during an update of an INN
      installation; on a few systems like AIX, it fails to run because its
      taint mode was improperly declared.

    * Several improvements have been contributed to pullnews by Geraint
      Edwards: the new -a flag adds the Diablo-compatible hashfeed ability,
      the new -B flag triggers header-only feeding, the -m flag now permits
      removing header fields matching (or not) a given regexp, and rnews
      reporting is improved.

    * innreport now properly takes into account the time nnrpd spends
      writing when using SASL.

    * scanlogs now only shows the first 50 lines from error log files. 
      Otherwise, all of them were present verbatim in the daily report, and
      the resulting e-mail could bounce owing to its length.  Thanks to
      Jeffrey M. Vinocur for the bug report.

    * Fixed the use of the legacy AUTHINFO GENERIC command, that has been
      broken since INN 2.4.0 (therefore proving readers probably no longer
      use that method to authenticate).  Thanks to Richard Kettlewell for
      having noticed, though, and contributed to tighten the security of the
      replies of this command.

    * Add the nnrp.access2readers.conf contribution script written by
      Jeffrey M. Vinocur to convert old-style nnrp.access file to
      readers.conf.

Changes in 2.5.4 (2014-05-17)

    * An up-to-date control.ctl file is provided with this release.  You
      should manually update your control.ctl file with the new information
      recorded about Usenet hierarchies.

    * A test has been improved in innwatch.ctl so that innwatch no longer
      throttles innd when no overview directory exists.  You should manually
      update your innwatch.ctl file to get this improvement.

    * Fixed a long-standing limitation on how controlchan and pgpverify were
      checking the signer of control messages.  They now properly handle the
      case of several UIDs being defined on a single PGP key, as well as the
      presence of spaces into UIDs.  In previous versions of INN, a few
      valid control messages got ignored because of that limitation
      (fido.ger.* and grisbi.* were for instance impacted).

    * As the name of the radius.conf configuration file shipped with INN for
      the nnrpd authenticator against a RADIUS server conflicts with the
      libradius package, this file is renamed to inn-radius.conf (innupgrade
      takes care of the rename during the update).

    * The attributes hash is now accessible to nnrpd Perl posting filter. 
      As a result, filter_nnrpd.pl can make use of it.  Only authentication
      and access Perl hooks could previously use the attributes hash. 
      Thanks to Steve Crook for this addition.

    * INN now properly builds fine with Flex 2.5.36 (this version introduced
      a change of type for a variable used by INN).

    * When using funnel feeds, innfeed log files were open forever, which
      resulted in empty log files, once rotated by scanlogs.  innfeed now
      reopens its log files upon receiving a HUP signal; this signal is in
      particular sent by scanlogs during log rotation.  Thanks to Florian
      Schlichting for the patch.

    * Exploder and process channels are now reopened when "ctlinnd
      flushlogs" is used.  Otherwise, they could hold open an already
      deleted errlog file.  The issue affected in particular controlchan or
      ninpaths, running as such channels.

    * Fixed a buffer overflow when using imapfeed with more than a million
      commands during the same IMAP session.  Thanks to David Binderman for
      the bug report.

    * Fixed a segfault occurring in innd on systems where time_t is a 64-bit
      integer.  Thanks to S.P. Zeidler for the patch.

    * Fixed a segfault occurring in nnrpd when a res block was used in
      readers.conf without the *program* key.

    * Fixed an issue where users were denied posting because of an
      overlapping buffer copy in a check nnrpd was doing.  Thanks to Florian
      Schlichting for the patch.

    * Fixed a regression that occurred in INN 2.5.3 regarding the path used
      by default by pullnews for its configuration file.  Instead of looking
      in the running user's home directory, it was looking in the *pathnews*
      directory set in inn.conf.  Thanks to Tony Evans for the bug report.

    * When neither wget nor ncftpget nor ncftp was found at configure time,
      the path to the simpleftp substitution program shipped with INN was
      not properly set in innshellvars, innshellvars.pl, and the
      "INN::Config" Perl module.  Thanks to Christian Garbs for the bug
      report.

    * ckpasswd no longer tries to use the ndbm compatibility layer provided
      by Berkeley DB if Berkeley DB has been built without ndbm support. 
      Also add support for gdbm libraries in ckpasswd.

    * Fixed a Perl warning in inncheck; using "defined(@array)" has been
      deprecated since Perl 5.16.

    * Fixed the occurrence of an unexpected "cant select" error generated by
      innd.  Thanks to Paul Tomblin for having caught that long-standing
      issue.

    * When building INN with Berkeley DB support, no longer add "-L/usr/lib"
      to the linker include flags; unconditionally adding it may break the
      build on systems using lib32 and lib64 directories.

    * On a fresh INN install, motd.innd and motd.nnrpd are no longer
      installed by default.  Instead, samples for these files are provided
      in *pathetc*, named differently so that their default contents are not
      displayed to news clients before they get customized.

    * Other minor bug fixes and documentation improvements (like the
      addition in the readers.conf man page of the *log* and *program*
      parameters in res blocks, and the *include* directive).

Changes in 2.5.3 (2012-06-15)

    Please note that the "HTML_STATUS" compile-time option has been replaced
    with the *htmlstatus* parameter in inn.conf.  If you used "HTML_STATUS",
    you should set *htmlstatus* accordingly.

    A confusion in the name of a key in innfeed.conf existed in the source
    code.  Make sure that the misspelled, undocumented *backlog-limit-high*
    key is *not* used in your innfeed.conf file; its real name is
    *backlog-limit-highwater*.  You should rename the key in case it is
    present in your configuration file.  Otherwise, it will not be taken
    into account.  You can run inncheck to verify that the syntax of this
    file is correct.

    It is generally recommended to run inncheck after any changes done to
    configuration files, especially with the new improved version of this
    script shipped with INN 2.5.3, thanks to the hard work of Florian
    Schlichting who added support for the syntax of incoming.conf,
    innfeed.conf, readers.conf and storage.conf.

    An up-to-date control.ctl file is provided with this release.  You
    should manually update your control.ctl file with the new information
    recorded about Usenet hierarchies.

    * When HDR/XHDR/XPAT were used on a new article coming into a newsgroup,
      requesting a header field not present in the overview database, the
      first subsequent OVER/XOVER command did not show that article.  A
      remap of the overview data file was missing in nnrpd.  Thanks to Sam
      Varshavchik for the bug report.

    * When a header field appeared more than once in an article, it was
      missing from the overview data.  OVER/XOVER, as well as HDR/XHDR/XPAT
      using the overview, were therefore returning an empty field.  The
      content of the first occurrence is now returned, in accordance with
      RFC 3977.

      Perl and Python filters for innd now also properly initialize their
      header field variables with the first occurrence of header fields. 
      (It is still the last occurrence for the Perl filter for nnrpd.)

    * Fixed a possible plaintext command injection during the negotiation of
      a TLS layer.  The vulnerability detailed in CVE-2011-0411 (and
      CVE-2012-3523, specifically for INN) affects the STARTTLS and AUTHINFO
      SASL commands.  nnrpd now resets its read buffer upon a successful
      negotiation of a TLS layer.  It prevents malicious commands, sent
      unencrypted, from being executed in the new encrypted state of the
      session.

    * Fixed a regression that occurred in INN 2.5.0 when leading whitespace
      characters have been made significant in header field bodies.  It
      could lead INN to drop articles and throttle itself when running as a
      slave because Xref header fields generated by other news servers, or
      even INN 2.4.6, could contain (valid) leading whitespace.  Thanks to
      Matija Nalis for having caught this bug.

    * Fixed an invalid "431" response to CHECK commands when innd is paused:
      the Message-ID of the article to defer was missing.  Also fixed
      another issue in the messages innd replied; when an error occurred
      during a write on a channel, a trailing extra junk byte was added to
      the reply.  Thanks to River Tarnell for these bug reports.

    * It is now possible to properly generate daily statistics with
      sendinpaths thanks to the new -k and -r flags that permit controlling
      the interval of days for processing dump files.  The new -c flag
      permits sending a copy of the generated e-mail to the newsmaster.

      Also fixed an issue with statistics that could be missing or
      duplicated for a couple of days when monthly sent.

      The documentation has been updated and mentions a preferred daily run
      of sendinpaths.  This script is a complete rewrite in Perl, and is
      based on Mohan Kokal's initial work.

    * cnfsheadconf now properly recognizes continuation lines in
      cycbuff.conf, that is to say lines ending with a backslash ("\"). 
      Thanks to John F. Morse for the bug report.

    * The order of CNFS buffers in a metacycbuff is now properly read and
      written by cnfsheadconf.  There previously was a confusion between
      hexadecimal and decimal values.  Thanks again to John F. Morse.

    * When the -l flag is given to cnfsstat, the cycbuff.conf and
      storage.conf files are now reloaded if they have been modified since
      the previous output of cnfsstat.

    * A single header field line is limited to 998 bytes, per RFC 5536. 
      innd was previously accepting, and also generating Xref header field
      lines, up to 1022 bytes.  Now, nnrpd (acting as an injecting agent)
      rejects articles which contain header field lines whose length exceeds
      998 bytes.  And innd (acting as a relaying or serving agent) no longer
      checks that.

    * nnrpd advertises the COUNTS, DISTRIBUTIONS, MODERATORS, MOTD and
      SUBSCRIPTIONS variants of the LIST command in response to
      CAPABILITIES.  These commands already existed in nnrpd but RFC 6048
      had not yet been published.

    * Add support for LIST MOTD in innd.  Consequently, the motd.news
      configuration file which was previously used only by nnrpd is renamed
      to motd.nnrpd (innupgrade takes care of the rename).  innd uses the
      new motd.innd file in *pathetc* for its message of the day.

    * Fixed an issue at configure time that made INN wrongly assume that
      OpenBSD (4.6) didn't support Unix-domain sockets.  Thanks to Wim Lewis
      for the patch.

    * Fixed an issue on systems which do not have a working flock(2)
      function (Solaris, for instance).  mailpost and pullnews are reported
      not to be usable on such systems.  Many thanks to Dennis Davis for the
      bug report.

      A wrapper around shlock is now called in Perl scripts.  The
      "INN::Utils::Shlock" module has been added for that use.

    * Fixed an issue in the Python access hook for nnrpd: it has not been
      working since Python 2.5 on 64-bit platforms, owing to a change to
      Python's C API, using a new Py_ssize_t type definition instead of int.
      Thanks to Raphael Barrois for the patch.

    * Improve the stability of the Perl filters for innd and nnrpd: properly
      save and restore the stack pointer when needed.

    * The Injection-Date header field, when present, is now used by innd and
      makehistory to determine the posting date of an article.  Otherwise,
      the Date header field is used.

    * controlchan now imposes a date cutoff on processing control articles. 
      The *artcutoff* parameter set in inn.conf is used.  Otherwise, without
      that cutoff, old control articles could be maliciously reinjected into
      Usenet, and replayed.  (An unsigned Injection-Date header field could
      be added to an article that only had a Date header field.)  A new -c
      flag has been added to controlchan to disable the cutoff check, if
      needed (usually when manually invoking the program).

    * nnrpd no longer adds or updates the Path header field when an article
      is forwarded to a moderator.  It could otherwise lead to rejects at
      injection time when the article was approved by the moderator.

    * The X-Trace header field was not properly generated when an article
      was locally posted.  The field mentioning the IP address was skipped,
      resulting in a wrong syntax for this header field.  The local
      "127.0.0.1" IP address is now used.  Besides, "localhost" is now
      mentioned instead of an obscure "stdin" in injection header fields.

    * Fixed a bug in the frequency innfeed logs its status: too many useless
      lines were written to news.notice.  Thanks to Florian Schlichting for
      the fix.

    * When unset in innfeed.conf, the *dynamic-method* parameter now
      properly defaults to "3" (instead of "0") and *use-mmap* to false
      (instead of true).  These two values were already the recommended ones
      in the documentation and the sample file.  Note that *use-mmap* is
      only used when innfeed is given file names to send instead of storage
      API tokens, which is a fairly rare use case.

    * innfeed no longer generates an error message (logged in news.err) when
      a parameter is not defined in innfeed.conf.  All the parameters have a
      default value, so there is no need to warn the user if they are not
      present in innfeed.conf.  Thanks to Dieter Stussy for having reported
      this problem.

    * Implement an upper limit to the number of file descriptors innd can
      handle.  At most "(FD_SETSIZE-1)" file descriptors can be used.  This
      upper limit now overrides any superior number set with *rlimitnofile*
      in inn.conf.  Thanks to Steve Crook for the bug report.

    * A default timeout on outgoing sockets (using "NNTPconnect") has been
      added by Florian Schlichting.  For a long time, there have been
      occasional problems with actsync (and probably other programs) that
      would hang until manually killed or restarted.

    * The flag -S has been added to innd by Florian Schlichting.  When used,
      innd reports the errors found in incoming.conf and exits.

    * pullnews no longer stops processing newsgroups when an error occurs
      during its run (for instance when a newsgroup mentioned in the
      configuration file is removed from an upstream server).  Besides, it
      can now use authentication when posting to the downstream server.

      A few other minor bugs have been fixed as for the way pullnews counts
      the articles.

    * Fixed the way innreport handles leap years.  It now properly generates
      HTML reports; dates were assumed to be relative to the current year,
      which may break their computation during for instance the whole 2012
      leap year.  Please note that no HTML reports have been lost, and that
      they will appear when INN is updated to this new version.

    * A new parameter has been added to inn.conf to determine whether the
      status file that innd can write out (depending on the value of the
      *status* parameter) is plain text or wrapped in HTML.  It previously
      only was a compile-time option, set to true by default.  Florian
      Schlichting added the *htmlstatus* parameter to provide a configurable
      behaviour.

    * It is now possible to run a script at the end of the execution of
      innshellvars scripts.  If a file named innshellvars.local,
      innshellvars.pl.local or innshellvars.tcl.local is present and
      executable in *pathetc*, then it will be executed by the corresponding
      innshellvars script (respectively shell, "INN::Config" Perl module,
      and Tcl).  A typical use is to add or override variables.

    * Add support for wire-formatted articles in scanspool.

    * A lot of work on cleaning old perl4-style code has been done by
      Florian Schlichting.

    * inncheck now generates a proper non-zero exit value when errors are
      found, and allows quiet mode with the -q flag.  Florian Schlichting
      has greatly improved this script in many regards, especially with a
      config-syntax parser for incoming.conf, innfeed.conf, readers.conf and
      storage.conf.

    * inncheck now properly finds the boundaries of substituted variables in
      newsfeeds thanks to Alexander Bartolich.

    * docheckgroups no longer uses AWK.  On a few systems, the script was
      failing because of the presence of an old version of AWK that has a
      limit in the size of the input it can handle.  Processing large
      newsgroups files was consequently impossible.  docheckgroups now uses
      Perl instead of AWK, which solves the issue reported by John F. Morse.

    * Other minor bug fixes and documentation improvements.  In particular,
      the *debug-shrinking*, *fast-exit* and *initial-sleep* keys in
      innfeed.conf are now documented.  The function "filter_end()", called
      when Perl filtering is turned off, is also documented for the innd and
      nnrpd Perl filters.

Changes in 2.5.2 (2010-03-24)

    The way checkpoints are handled by innreport for innd and innfeed has
    totally changed to provide more accurate daily statistics.  The first
    Usenet report after an upgrade to INN 2.5.2 will probably contain
    incorrect statistics for incoming and outgoing articles because the
    beginning of the log files that will be used was generated by a previous
    version of INN.

    A new version of innreport.conf is shipped with INN 2.5.2 but, in order
    to preserve any local changes, will not be automatically installed with
    "make update".  The changes are minor and not mandatory for the upgrade.

    * Julien Elie has implemented in innd the new version of the NNTP
      protocol described in RFC 3977, RFC 4643 and RFC 4644, and innd now
      recognizes the CAPABILITIES command.  Despite these standards, three
      commands (IHAVE, CHECK and TAKETHIS) will continue, for
      interoperability reasons, to return a reject code (respectively "435",
      "438", and "439") when the command contains a syntax error instead of
      "501".  The mandatory username argument for authenticated peers is not
      enforced in INN 2.5.2 but will be enforced by INN 2.6.0 when it is
      released.

      Major improvements are:

      * innd now has a decent parser for NNTP commands.  The parser is more
        correct (commands like "IHAVE<mid>", without a space between the
        command and its argument, are no longer valid) and allows leading
        and trailing whitespaces in commands.  innd also now checks the
        length of the NNTP command sent by the client.  If the command
        contains more than 512 bytes (or 497 bytes for an argument), an
        error is returned and the command is discarded.  After ten
        unrecognized commands, innd closes the connection with the
        appropriate code ("400" instead of "500").

      * The output of the HELP command specifies the arguments expected by
        NNTP commands, similar to nnrpd's HELP command.

      * LIST ACTIVE, LIST ACTIVE.TIMES and LIST NEWSGROUPS now allow an
        optional wildmat argument to restrict the results of those commands
        to specific newsgroups.

      * When using HEAD or STAT with an article number or a range, "412" (no
        group selected) is now returned instead of "501" (syntax error).

    * Jeffrey M. Vinocur has implemented support in both innd and nnrpd for
      whitespace in usernames/passwords provided with AUTHINFO USER/PASS. 
      They were previously treated as invalid arguments or incorrectly
      parsed.  innd and nnrpd now treat everything after the first
      whitespace character following AUTHINFO USER/PASS, up to, but not
      including, the final CRLF, as the username/password, in conformity
      with RFC 4643.

    * The syntax of Message-IDs is now based on RFC 5536 (USEFOR) instead of
      RFC 1036.  The major change is that quoted-pairs have been removed
      from the syntax.

    * The Perl and Python filters for innd now check the Message-ID of
      articles arriving through TAKETHIS.  Only CHECK and IHAVE commands
      previously used them.

    * Case-insensitive matches are now used for distributions, path
      identities, IMAP commands, header field names, and control commands. 
      (Newsgroups are still matched case-sensitively.)  Message-IDs are
      case-sensitively matched, except for history hashes.

    * The new Archive, Archive-At, Comments, and Summary header fields
      defined in RFC 5064 and RFC 5536 can be used in innd filters.  nnrpd
      now checks at injection time that an article does not contain an
      Injection-Info header field, that an Injection-Date header field (if
      provided) is valid, and that the Path header field body does not
      contain ".POSTED".  Note that INN does not yet generate these two
      injection fields or include the new ".POSTED" keyword in Path header
      fields.  These new features will be in the next major release of INN.

    * LIST SUBSCRIPTIONS now accepts an optional wildmat argument to
      restrict the results of this command to specific newsgroups.

    * nnrpd now supports a new LIST variant named COUNTS.  LIST COUNTS is a
      combination of LIST ACTIVE and GROUP.  It returns the same result as
      LIST ACTIVE except that the number of articles in a newsgroup is
      inserted before its status.

    * A new flag has been added to newsfeeds entries: "Aj", when present,
      says to feed articles accepted and filed in "junk" (due to
      *wanttrash*) to peers based on their newsfeeds feed patterns applied
      to the Newsgroups header field as though the article were accepted and
      all those groups were locally carried.  This is useful if you want to
      run INN with a minimal active file and propagate all posts.  Thanks to
      Andrew Gierth for the patch.

    * A new parameter has been added to inn.conf: *logtrash* defines whether
      a line for articles posted to groups not locally carried by the news
      server should be added in the news log file to report unwanted
      newsgroups.  The default is true but it can be useful to set it to
      false (especially when *wanttrash* is also used).

    * The procbatchdir keyword has been added to news.daily to specify the
      backlog directory of innfeed.  This is useful when several instances
      of innfeed are running or when its configuration file is not the
      default one.

    * sm now supports a new flag, -c, which shows a decoded form of the
      storage API token.  This was previously done by the contrib showtoken
      script developed by Olaf Titz and Marco d'Itri.

    * The O flag in newsfeeds now relies on the contents of the
      Injection-Info header field if it is present to determine the origin
      of an article.  It falls back on X-Trace if there is no Injection-Info
      header field.

    * A new "unsigned long" type bas been added to the configuration parser.
      It will properly warn the news administrator when a variable supposed
      to be positive contains a negative integer.  It will prevent INN from
      crashing due to misconfiguration at several places where it did not
      expect negative values.

    * innxbatch and innxmit now recognize the new "403" code introduced by
      RFC 3977 for a problem preventing the requested action from being
      taken.

    * HDR and OVER commands now return the correct "423" code (instead of
      "420") when the current article number is used but the article no
      longer exists.

    * actsync, inews, innxbatch, innxmit, nntpget and rnews can now
      authenticate to news servers which only expect a username, without
      password, conforming to RFC 4643.

    * The keyword generation code now generates a Keywords header field only
      if the original article does not already have one.  The generated
      Keywords header field no longer begins with a comma.  If keyword
      generation is set to true in inn.conf but the Keywords header field is
      not stored in the overview, the news administrator is warned and
      keyword generation deactivated, since it exists only to populate the
      overview data.

    * Two segfaults in keyword generation were fixed.  The first occurred
      when an article already had a Keywords header field longer than the
      *keylimit* parameter.  The second was caused by a possible invalid
      pointer beyond the newly allocated Keywords header field.

    * Fixed innd handling of empty lines.  innd was not properly discarding
      an empty command and was closing the connection when it received only
      whitespace in a command.

    * Fixed a bug in how innd responded to reader commands when readers were
      not allowed.  A superfluous blank line was sent in its response.

    * Fixed a bug in innd's response to TAKETHIS when authentication is
      required.  Previously, "480" code was returned immediately without
      accepting the multi-line data block first, which broke synchronization
      in the NNTP protocol.

    * Fixed a bug in recognizing the article terminator when empty articles
      were fed to innd via IHAVE or TAKETHIS, leading to treating subsequent
      NNTP commands as part of the article.

    * When innd could not provide information for LIST ACTIVE.TIMES and LIST
      NEWSGROUPS, it was returning an invalid error message without a
      response code.  The proper "503" answer code is now returned.

    * When an unauthenticated user tried to post an article, nnrpd replied
      "440" (posting not allowed) instead of the correct "480"
      (authentication required) response if the user might be able to post
      after authentication.  Thanks to Daniel Weber for the bug report.

    * Fixed a bug in both innd and nnrpd answers to LIST commands where the
      output was not checked for valid dot stuffing.

    * Fixed a bug leading to junked non-control articles being sent to
      control-only feeds, and also fixed handling of poisoned control
      groups.  Thanks to Andrew Gierth for the patch.

    * Fixed a bug in innreport leading to incorrect summing of innd stats
      when *hostname* was set to an IPv6 address instead of a fully
      qualified domain name.  Thanks to Petr Novopashenniy for the bug
      report.

    * Changed how innreport uses innd and innfeed checkpoint messages. 
      Previously, connections held open for multiple days led to skewed and
      incorrect statistics on how many articles had been received or sent. 
      The count is now more accurate and, for each connection of a feed,
      only depends on *incominglogfrequency* in inn.conf and *stats-period*
      in innfeed.conf.

    * Fixed a bug in nnrpd Perl filter: a header field whose name begins
      with the name of a standardized header field was not properly handled.

    * Fixed a bug in how innd was parsing Message-ID and Supersedes header
      field bodies which contained trailing whitespace.  The article was
      corrupted by an unexpected "\r" in the middle of the header field
      body.  nnrpd now checks the syntax of the Message-ID header field, if
      present.

    * Fixed various bugs in how leading whitespace was treated in header
      fields.  The HDR, XHDR and XPAT commands were not properly showing
      leading whitespace in header field bodies.  Lone "\n" and "\r"
      characters are now changed into spaces and "\r\n" is just removed. 
      archive, makehistory, and tdx-util now keep leading whitespace in
      header field bodies when generating overview data, and archive now
      changes "\n" (when not preceded by "\r") into a space when generating
      overview data.

    * Fixed a bug in the generation of overview data which may corrupt
      previously generated overview data when a pseudo Xref header field is
      injected in an extra overview field.

    * Fixed a bug in the parsing of the *ovgrouppat* wildmat in inn.conf
      that prevented overview data from being generated when poisoned groups
      were specified but a latter sub-pattern matched the group.  A uwildmat
      expression is now correctly handled, and a potential segfault has been
      fixed.  Thanks to Dieter Stussy for the bug report.

    * Fixed a bug when HDR, XHDR and XPAT were used when *virtualhost* was
      set to true in readers.conf.  The Xref header field of articles posted
      to only one newsgroup appeared empty.

    * Fixed a bug in tdx-util in parsing empty overview fields when called
      with -A or -F.

    * Fixed a bug in cvtbatch, which was returning only the size of the
      headers of an article when the "b" parameter was used with the -w
      flag.  It now correctly returns the size of the whole article, which
      is what "b" was documented to do.  cvtbatch also has a new "t"
      parameter, which can be used with the -w flag to retrieve the arrival
      time of an article.

    * Fixed a bug in how mailpost handles cross-posting feature.  It was not
      properly detaching from sendmail.  Thanks to Harald Dunkel for the
      patch.

    * Fixed a bug in the newsfeeds C flag: the count of followup groups was
      one less than the real number.  When the value of the Followup-To
      header field is "poster", it is no longer considered to be a followup.
      Thanks to Dieter Stussy for the patch.

    * When using tradindexed, the overview data for a cancelled article is
      now immediately removed from the overview.  Thanks to Lars Magne
      Ingebrigtsen for the patch.

    * batcher has not supported the retrieval of an article with its file
      name for a long time.  The -S flag has therefore been removed.

    * inews no longer rejects articles that contain more than 50 header
      fields.  Thanks to Torsten Jerzembeck for the bug report.

    * news.daily no longer sends superfluous mails when the nomail keyword
      is given.  Mail is only sent when there is real output.  Previously,
      there would always be headings and empty lines left over from the
      structuring of the full report, which are now omitted.  Also, the
      output of programs executed with postexec is now included in the
      regular mail.  Thanks to Florian Schlichting for the patch.

    * innconfval no longer maps NULL string or list values to an empty
      string or list and instead maps them to undefined values.  This fixes
      an issue reported by Kamil Jonca: nnrpd was inserting an empty
      Organization header field when the *organization* parameter in
      inn.conf was unset.

    * Other minor bug fixes and documentation improvements.

Changes in 2.5.1 (2009-10-10)

    * Fixed a segfault in imap_connection which could occur when SASL was
      used.

    * Fixed a segfault in the keyword generation code which was assuming
      that an article was nul-terminated.  Fixed another segfault in the
      keyword generation code when an article already contained a Keywords
      header field.  Thanks to Nix for the bug reports.

    * Owing to the US-CERT vulnerability note VU#238019, Cyrus SASL library
      has slightly changed.  imap_connection and nnrpd now handle that
      change.  Otherwise, some answers are too long to be properly computed
      during SASL exchanges.

    * Fixed a memory allocation problem which caused nnrpd to die when
      retrieving via HDR/XHDR/XPAT the contents of an extra overview field
      absent from the headers of an article.  The NEWNEWS command was also
      affected on very rare cases.  Thanks to Tim Woodall for the bug
      report.

    * HDR/XHDR/XPAT answers are now robust when the overview database is
      inconsistent.  When the overview schema was modified without the
      overview database being rebuilt, wrong results could be returned for
      extra fields (especially a random portion of some other header field).
      The desired header field name is now explicitly searched for in the
      overview information.

    * Fixed the source which is logged to the news log file for local
      postings when the local server is not listed in incoming.conf.  A
      wrong name was used, taken amongst known peers.  The source is now
      logged as "localhost".

    * Fixed a bug in the timecaf storage method: only the first 65535
      articles could be retrievable in a CAF, though everything was properly
      stored.  (A Crunched Article File contains all the articles that
      arrive to the news server during 256 seconds.)

      The storage token now uses 4 bytes to store the article sequence
      number for timecaf, instead of only 2 bytes.  Thanks to Kamil Jonca
      for the bug report and also the patch.

    * Fixed a bug in both timecaf and timehash which prevented them from
      working on systems where short ints were not 16-bit integers.

    * When there is not enough space to write an entire CAF header, the
      timecaf storage manager now uses a larger blocksize.  On 32-bit
      systems, the CAF header is about 300 bytes, leaving about 200 bytes
      for the free bitmap index (the remaining of a 512-byte blocksize).  On
      64-bit systems, the size of the CAF header could exceed 512 bytes,
      thus leaving no room for the free bitmap index.  A 1 KB blocksize is
      then used, or a larger size if need be.

    * A new CNFS version has been introduced by Miquel van Smoorenburg in
      the CNFS header.  CNFSv4 uses 4 KB blocks instead of 512 bytes, which
      more particularly makes writes faster.  CNFSv4 supports
      files/partitions up to 16 TB with a 4 KB blocksize.

      Existing CNFS buffers are kept unchanged; only new CNFS buffers are
      initialized with that new version.

    * "grephistory -l" now returns the contents of the expires history field
      as well as the hash of the Message-ID.  Besides, when the storage API
      token does not exist, "grephistory -v" now also returns the hash of
      the requested Message-ID.

    * The check on cancel messages when *verifycancels* is set to true in
      inn.conf has been changed to verify that at least one newsgroup in the
      cancel message can be found in the article to be cancelled.  This new
      feature is from Christopher Biedl.

      The previous behaviour was to check whether the cancel message is from
      the same person as the original post, which is extremely easy to
      spoof; besides, RFC 5537 (USEPRO) mentions that "cancel control
      messages are not required to contain From and Sender header fields
      matching the target message.  This requirement only encouraged cancel
      issuers to conceal their identity and provided no security".

    * The way the "/remember/" line in expire.ctl works has changed. 
      History retention for an article was done according to its original
      arrival time; it is now according to its original posting date. 
      Otherwise, unnecessary data may be kept too long in the history file.

      To achieve that, the "HISremember()" function in history API now
      expects a fourth parameter: the article posting time.

      Note that article expiration has not changed and is still based on
      arrival time, unless the -p flag is passed to expire or expireover, in
      which case posting time is used.

    * The default value for "/remember/" has changed from "10" to "11"
      because it should be one more than the *artcutoff* parameter in
      inn.conf, so that articles posted one day into the future are properly
      retained in history.

    * auth_krb5 has been rewritten by Russ Allbery to use modern Kerberos
      APIs.  Note that using ckpasswd with PAM support and a Kerberos PAM
      module instead of this authenticator is still recommended.

    * A new -L flag has been added by Jonathan Kamens to makehistory so as
      to specify a load average limit.  If the system load average exceeds
      the specified limit, makehistory sleeps until it goes below the limit.

    * As UTF-8 is the default character set in RFC 3977, "ctlinnd pause",
      "ctlinnd readers", "ctlinnd reject", "ctlinnd reserve", "ctlinnd
      throttle" and "nnrpd -r" commands now require the given reason to be
      encoded in UTF-8, so that it can be properly sent to news readers. 
      The creator's name given to "ctlinnd newgroup" is also expected to be
      encoded in UTF-8.

    * The output of consistency checks for article storage and the history
      file no longer appears by default when "cnfsstat -a" is used.  A new
      -v flag has been added to cnfsstat so as to see it.

    * The default path for TLS certificates has changed from *pathnews*/lib
      to *pathetc*.  It only affects new INN installations or generations of
      certificates with "make cert".  Besides, a default value has been
      added to *tlscapath* because it is required by nnrpd when TLS is used.

    * gzip(1) is now the default UUCP batcher in send-uucp instead of
      compress(1) because gzip is more widely available than compress, due
      to old patent issues.  Note that there is no impact on decompression
      as it is handled by rnews.

    * cnfsheadconf now uses the Perl core module "Math::BigInt" rather than
      the deprecated bigint.pl library.  When used without specifying a CNFS
      buffer, it now properly displays the status of all CNFS buffers.

Upgrading from 2.4 to 2.5

    The following changes require your full attention because a manual
    intervention may be needed:

    * In order to process control messages, controlchan now needs the
      "MIME::Parser" module.  Packages are available from most
      distributions, or you can install the module directly from CPAN
      ("MIME-tools" in modules/by-module/MIME/, for instance on
      ftp.perl.org).

      Perl 5.8.0 or later is recommended for INN.  If you are using an
      earlier version, you will also need the "Encode" module for correct
      processing of control messages.  (It is included with Perl itself in
      5.8.0 and later.)

    * Checkgroups control messages are now differently handled by
      controlchan: all matching lines in control.ctl will be used for a
      given checkgroups and a doit action will really be executed (adding,
      removing and changing the status of newsgroups).  You should make sure
      that your local configuration does not rely on the previous behaviour
      of only mailing changes, without actually performing them.

    * You should use the new control.ctl.local file shipped with INN in
      *pathetc* and, at the same time, update your control.ctl and
      moderators files.  Also make sure that your active.times, distrib.pats
      and newsgroups files are properly encoded in UTF-8, as it is strongly
      recommended by RFC 3977.

    * The overview.fmt file is no longer used by INN.  Two new parameters
      have been added to inn.conf: *extraoverviewadvertised* and
      *extraoverviewhidden*.  Although innupgrade takes care of the change
      during "make update", you should make sure that your overview database
      is consistent with all the fields declared in overview.fmt because
      they will all be advertised, and "Xref:full" forced as the eighth
      overview field.  See the inn.conf(5) man page for more information
      about these parameters.

    * The innreport configuration file has slightly changed.  The new
      innreport.conf file shipped with INN should be used and your possible
      changes backported to this new version.

    * The "$SPOOLBASE" variable has been renamed to "$SPOOLDIR" in
      innshellvars in order to be more consistent.  It impacts shell scripts
      only.  If you import innshellvars and use that variable in your
      scripts, you will have to rename it.

    * gpgverify is no longer included in INN, pgpverify now has better
      support for GnuPG and should be used instead.

    * The auth_smb authenticator program to check passwords with an SMB
      authentication is no longer included in INN.  It was a stripped-down
      version of pam_smbpass(5), wasn't maintained, and likely had security
      problems.  To authenticate to an SMB server such as Samba, use PAM and
      ckpasswd's PAM support instead.

    The parameters used by nnrpd to provide TLS support are now *tlscafile*,
    *tlscapath*, *tlscertfile* and *tlskeyfile* in inn.conf.  The sasl.conf
    file used for that in previous versions of INN is obsolete.  innupgrade
    takes care of the change during "make update".

    The *nntpactsync* parameter has been renamed to *incominglogfrequency*
    in inn.conf; innupgrade handles this renaming during the update.

    In newsfeeds, innfeed should be run directly rather than through
    startinnfeed.  innupgrade will attempt to take care of this modification
    during "make update".

    When starting innd by hand, innd can just be run directly rather than
    using inndstart.  If you get error messages about resetting the file
    descriptor limits, you may need to increase the file descriptor limits. 
    See the sample init script in contrib for an example of how to do this.

    If you are upgrading from a version prior to INN 2.4, see also
    "Upgrading from 2.3 to 2.4".

Changes in 2.5.0 (2009-05-21)

    * Ken Murchison has contributed SASL authentication support for nnrpd,
      implementing the AUTHINFO SASL section of RFC 4643.  If the
      --with-sasl option is given to "configure", nnrpd will be able to
      authenticate clients via secure SASL mechanisms.

    * Julien Elie has implemented in nnrpd the new version of the NNTP
      protocol described in RFC 3977, RFC 4642 and RFC 4643.  Consequently,
      nnrpd now recognizes the CAPABILITIES command, the HDR and LIST
      HEADERS commands, the second optional argument to specify a range of
      articles to LISTGROUP, the OVER command, as well as the ":bytes" and
      ":lines" metadata items.

    * Heath Kehoe has added the ability to compress overview data before it
      is stored in ovdb.  It significantly improves the performance of this
      storage method and reduces the time spent by expireover.  See the new
      --with-zlib option to "configure" and the ovdb(5) man page.

    * Alexander Bartolich has greatly improved innreport and especially its
      XHTML output (an XSL transformation is also provided, if needed, in
      innreport-filter.xslt, in the contrib directory).

    * inndstart and startinnfeed are no longer part of INN and are no longer
      used.  Instead, a separate setuid root helper program written by Russ
      Allbery is used to bind to the news ports (and does only that), and is
      run by innd and nnrpd when necessary.  This means that INN may not be
      able to increase file descriptor limits for itself the way that it
      could before.  If you get error messages about resetting the file
      descriptor limits, you may need to increase the file descriptor limits
      as root before running rc.news as the news user.  See the sample init
      script in contrib for an example of how to do this.  More information
      on file descriptor limits can be found in INSTALL.

    * INN's IPv6 support was largely rewritten by Russ Allbery.  IPv4 and
      IPv6 are now handled through the same code wherever possible, the new
      IPv6-aware APIs are used everywhere possible, and replacement
      functions are provided for systems that don't have them yet.  The
      network code is now much more centralized, eliminating lots of
      duplicate code and adding better IPv6 support to some utilities.

    * INN now uses Autoconf 2.61 or later for configuration.  As a result,
      some "configure" options have changed slightly and more of the
      standard --*dir options should be supported in lieu of the old
      INN-specific options.  See "configure --help" for the available
      options.

    * Thanks to Kirill Berezin, the buffindexed overview method now supports
      buffers larger than 2 GB.  It is not necessary to compile INN with
      large file support to use such large buffers with buffindexed. 
      Buffindexed is now also more robust with mmaped files and uses more
      optimized data placement.

    * tinyleaf, a miniature IHAVE-only leaf server written by Russ Allbery,
      is now included.  See the tinyleaf(8) man page for more information.

    * controlchan recognizes the new application/news-groupinfo entity
      described in USEPRO and can handle character set conversions of
      newsgroup descriptions.  The "MIME::Parser" and "Encode" modules are
      used.  Processing control messages has been greatly improved,
      especially checkgroups: the active and newsgroups files are now
      properly updated when they are processed, and all matching lines in
      control.ctl for a given checkgroups are honoured (which for instance
      allows using both drop and doit actions for the same checkgroups
      message).

      A new control.ctl.local file has also been added in *pathetc*.  Rules
      set in that file override rules in control.ctl, allowing
      administrators to specify local rules for some control messages
      without modifying the control.ctl configuration file that comes with
      INN.  It also specifies encodings to use for the newsgroups file.  By
      default, UTF-8 will be used for newsgroup descriptions, as strongly
      recommended by RFC 3977.

    * The Perl and Python *filter_mode* hooks are now called when innd is
      shutting down via either "ctlinnd shutdown" or "ctlinnd xexec" with a
      new mode value of "shutdown".  This will allow the Perl hooks to save
      filter data across innd restarts without requiring that the news
      administrator throttle the server first.  (Python already had a
      separate close hook that is also called.)

    * The legacy innshellvars.pl script has been replaced with a real INN
      Perl module "INN::Config" for Perl programs.  The location of Perl
      modules can be set with the --with-libperl-dir option to "configure". 
      All Perl scripts shipped with INN have been converted to use that
      module.  You may want to consider using "INN::Config" in your Perl
      scripts, though innshellvars.pl is still provided with INN.

    * Support for embedded Tcl filters in innd has been removed.  It hasn't
      worked for some time and causes innd crashes if compiled in (even if
      not used).  If someone wants to step forward and maintain it, we
      recommend starting from scratch and emulating the Perl and Python
      filters.

    * If *strippath* is set in readers.conf, the whole user-supplied Path
      header field will now be stripped.  Previously, the final component of
      the user-supplied Path header field body would still be retained.

    * news2mail can now set the envelope-from address of the mails it sends.
      A third optional part in news2mail.cf entries has been added by
      D. Stussy to achieve that.

    * The -g option to nnrpd is no longer supported.  If you are verifying
      passwords against the system password database, see the ckpasswd(8)
      man page, and in particular the -s option.  (A much better idea would
      be to just use PAM, which ckpasswd supports.)

    * Fixed a bug in "ctlinnd renumber" which was resetting the low and high
      water marks of empty newsgroups in the active file.  This command now
      makes the low water mark one more than the real high water mark.  The
      answers to LIST ACTIVE, GROUP and LISTGROUP have also been fixed to do
      that.

    * Support for bzip2-compressed batches (with bunbatch) has been added.

    * news.daily now processes innfeed dropped files during daily
      maintenance, running procbatch.

    * Support for *runasuser* and *runasgroup* parameters in inn.conf allows
      setting the news user and the news group under which the news server
      runs.  Thanks to Ivan Shmakov for this feature.

      New other options have been added to configuration files: *ignore* in
      incoming.conf, *logstatus*, *nnrpdflags* and *verifygroups* in
      inn.conf, and *log-time-format* in innfeed.conf.

      The --with-http-dir option has also been added to "configure" to set
      *pathhttp* in inn.conf.

      The *nntpactsync* parameter has been renamed to *incominglogfrequency*
      in inn.conf.

    * The sasl.conf file has been removed in favour of new parameters in
      inn.conf to deal with TLS support: *tlscafile*, *tlscapath*,
      *tlscertfile* and *tlskeyfile*.

    * The overview.fmt file has been removed in favour of new parameters in
      inn.conf to deal with transition periods to accommodate overview
      reconfigurations.  It is now possible to specify on the one hand the
      fields that should be advertised by nnrpd in response to LIST
      OVERVIEW.FMT and used for HDR, XHDR and XPAT requests (see the new
      *extraoverviewadvertised* parameter) and on the other hand the
      additional fields that should be silently generated (see the new
      *extraoverviewhidden* parameter).

    * Support for Berkeley DB versions prior to 4.3 has been dropped.  You
      will have to use at least Berkeley DB 4.4; the recommended version is
      4.7.

    * INN now builds entirely free of warnings from GCC with fairly
      aggressive warning options enabled.  This involved lots of cleanup of
      const strings, signed versus unsigned type handling, correcting printf
      formats, and other changes that fixed obscure bugs and made INN's code
      more robust.  Russ Allbery has also done considerable cleanup work on
      some of INN's internals, simplifying, refactoring, and removing
      duplicate code.

    * INN's test suite is now much more comprehensive and tests some
      high-level functions as well as more of the portability and utility
      function layer.

    * A lot of work has been done on documentation: improvements of existing
      documents, new documentation, and proof-reading.  Sample configuration
      files are also more detailed.

    * All of the applicable bug fixes from the INN 2.4 STABLE series are
      also included in INN 2.5.

Changes in 2.4.6 (2009-02-27)

    * Fixed the segfault of the radius authenticator when none of the radius
      servers respond.  Thanks to Matija Nalis for this patch.

    * Fixed a lost initialization in buffindexed, which resolves a potential
      segfault, thanks to a patch by Kirill Berezin.

    * INN now properly supports Perl 5.10.0 (and also 5.8.9); Perl filters
      were causing innd to segfault on a few systems like FreeBSD.

    * Fixed a long-standing bug which affected Perl hooks for innd: the
      variable containing the body of an article was not properly created,
      which caused regular expressions matching new lines to fail.  It
      especially affected filters like Cleanfeed which sometimes failed to
      detect unwanted articles.

      To fix that issue, Julien Elie added the use of a shared string,
      available since Perl 5.7.2, with a fall back to a slower but reliable
      copy of such bodies in case the function is not available.  Using a
      Perl version superior to 5.7.2 is therefore recommended.

    * Fixed two bugs which could prevent nnrpd from being run as a daemon in
      FreeBSD.  Thanks to Johan van Selst for having identified the problem
      and to Kai Gallasch for having provided a testing FreeBSD server.  The
      listening address was not initialized to "::0" or "0.0.0.0" when the
      -b flag was not used and an incorrect size was given when IPv6 was
      enabled and the binding done using IPv4.

    * Some annoying assertion failures occurring in innfeed have been fixed
      by Russ Allbery and Julien Elie.

    * Fixed a bug in mod-active for aliased newsgroups.  Only "=" was
      written to the active file.  Thanks to D. Stussy for this patch.

    * Fixed a bug which caused innd not to honour the Ad flag in newsfeeds.

    * Fixed a bug in the IP address displayed for "localhost" in innd's
      status file.  It was not correctly initialized.

    * Fixed a permission issue: XHDR and XPAT were not checking the rights
      the user had to read articles when accessing them by their Message-ID.

    * Fixed a bug in the replies of XHDR, XOVER and XPAT when the newsgroup
      is empty.  Two initial replies were sent instead of one: the right
      "420" code followed by a wrong "224" code.

    * When no newsgroup is selected, LISTGROUP now returns the right "412"
      code (instead of "481").

    * inncheck now uses a range of permissions to see whether the file modes
      are correctly set.  Therefore, different configurations depending on
      the security the user wants to enforce on his system are possible.

    * A new improved version of docheckgroups is shipped with INN.  The -u
      flag permits updating automatically the newsgroups file (with a proper
      number of tabulations and an alphabetical sort), removing obsolete
      descriptions and adding new ones.  A second argument on command-line
      permits specifying which newsgroups should not be checked, so as not
      to treat them.

    * An *email=* keyword has been added by James Ralston to news.daily in
      order to supply another mail address than the one set at configure
      time for Usenet daily reports.

    * An updated moderators file with information about the aioe.*, perl.*
      and si.* hierarchies is provided.

    * An updated control.ctl file is provided.

    * INN supports Berkeley DB 4.7, which is the recommended version to use
      owing to various bugs affecting previous versions of Berkeley DB.

    * Other minor bugs have also been fixed.

Changes in 2.4.5 (2008-06-29)

    * Fixed the "alarm signal" around "SSL_read" in nnrpd: it allows a
      proper disconnection of news clients which were previously hanging
      when posting an article through an SSL connection.  Moreover, the
      *clienttimeout* parameter now works on SSL connections.  Thanks to
      Matija Nalis for the patch.

    * "SO_KEEPALIVE" is now implemented for SSL TCP connections on systems
      which support it, allowing system detection and closing the dead TCP
      SSL connections automatically after system-specified time.  Thanks to
      Matija Nalis for the patch.

    * Fixed a segmentation fault when an article of a size greater than
      remaining in the stack is retrieved via SSL.  Thanks to Chris Caputo
      for this patch.

    * Fixed a few segfaults and bugs which affected both Python innd and
      nnrpd hooks.  They no longer check the existence of methods not used
      by the hooked script.  An issue with Python exception handling was
      also fixed, as well as a segfault fixed by Russ Allbery which happened
      whenever one closes and then reopens Python in the same process. 
      Julien Elie also fixed a bug when reloading Python filters (they were
      not always correctly reloaded) and a segfault when generating access
      groups with embedded Python filters for nnrpd.  Many thanks to David
      Hlacik for its bug reports.

    * The nnrpd.py stub file in order to test Python nnrpd hooks, as
      mentioned in their documentation, is now installed; only INN.py was
      previously installed in *pathfilter*.

    * Fixed a bug in INN.py and add missing methods to it.

    * Fixed a long-standing bug in innreport which prevented it from
      correctly reporting nnrpd and innfeed log messages.

    * Fixed a hang in Perl hooks on (at least) HP/PA since Perl 5.10.

    * Fixed a compilation problem on some platforms because of "AF_INET6"
      which was not inside a "HAVE_INET6" block in innfeed.

    * Fixed a bug in innfeed which contained thrice the same IPs for each
      peer; it unnecessarily slowed the peer IP rotation for innfeed. 
      Thanks, D. Stussy, for having seen that.  Miquel van Smoorenburg
      provided the patch.

    * A new *heavily* improved version of pullnews is shipped with this INN
      release.  This new version is provided by Geraint Edwards.  He added
      no more than 16 flags, fixed some bugs and integrated the backupfeed
      contrib script by Kai Henningsen, adding again 6 other flags.  A
      long-standing but very minor bug in the -g option was especially fixed
      and items from the to-do list implemented.  Many thanks again to
      Geraint Edwards.

    * New header fields are accessible through Perl and Python innd
      filtering hooks.  You will find the exact list in the INN Python
      Filtering and Authentication Hooks documentation (doc/hook-python) and
      in Python samples.  Thanks to Matija Nalis for this addition of new
      useful header fields.

    * New samples for Python nnrpd hooks are shipped with INN:
      nnrpd_access.py for access control and nnrpd_dynamic.py for dynamic
      access control.  The nnrpd_auth.py script is now only used for
      authorization control.  See the readers.conf man page for more
      information (especially the *python_auth*, *python_access* and
      *python_dynamic* parameters).  The documentation about INN Python
      Filtering and Authentication Hooks has also been improved by Julien
      Elie.

Changes in 2.4.4 (2008-05-05)

    * Fixed incomplete checking of packet sizes in the ctlinnd interface in
      the no-Unix-domain-sockets case.  This is a potential buffer overflow
      in dead code since basically all systems INN builds on support Unix
      domain sockets these days.  Also track the buffer size more correctly
      in the client side of this interface for the Unix domain socket case.

    * Group blocks in incoming.conf are now correctly parsed and no longer
      cause segfaults when loading this file.

    * Fixed a problem with innfeed continuously segfaulting on amd64
      hardware (and possibly on lots of 64-bit platforms).  Many thanks to
      Ollivier Robert for his patch and also to Kai Gallasch for having
      reported the problem and provided the FreeBSD server to debug it.

    * scanlogs now rotates innfeed's log file, which prevents innfeed from
      silently dying when its log file reaches 2 GB.

    * Perl 5.10 support has been added to INN thanks to Jakub Bogusz.

    * Some news clients hang when posting an article through an SSL
      connection: it seems that nnrpd's SSL routines make it wrongly wait
      for data completion.  In order to fix the problem, the "select()" wait
      is now just bypassed.  However, the idle timer stat is currently not
      collected for such connections.  Thanks to Kachun Lee for this
      workaround.

    * Fixed a bug in the display of the used compressor ("cunbatch" was used
      if arguments were passed to gzip or bzip2).

    * Fixed a bug in mailpost and pullnews which prevented useful error
      messages to be seen.  Also add the -x flag to pullnews in order to
      insert Xref header fields in articles which lack one.

    * If compiling with Berkeley DB, use its ndbm compatibility layer for
      ckpasswd in preference to searching for a traditional dbm library. 
      INN also supports Berkeley DB 4.4, 4.5 and 4.6 thanks to Marco d'Itri.

    * ovdb_init now properly closes stdin/out/err when it becomes a daemon. 
      The issue was reported by Viktor Pilpenok and fixed by Marco d'Itri.

    * Added support for Diablo quickhash and hashfeed algorithms.  It allows
      distributing the messages among several peers (new Q flag for
      newsfeeds).  Thanks to Miquel van Smoorenburg for this implementation
      in INN.

    * innd now listens on separate sockets for IPv4 and IPv6 connections if
      the "IPV6_V6ONLY" socket option is available.  There might also be
      operating systems that still have separate IPv4 and IPv6 TCP
      implementations, and advanced features like TCP "SACK" might not be
      available on v6 sockets.  Thanks to Miquel van Smoorenburg for this
      patch.

    * The two configuration options *bindaddress* and *bindaddress6* can now
      be set on a per-peer basis for innfeed.  Setting *bindaddress6* to
      "none" tells innfeed to never attempt an IPv6 connection to that host.
      Thanks to Miquel van Smoorenburg for this patch.

    * Added an *nnrpdflags* parameter to inn.conf (modelled on the concept
      of *innflags*) to permit passing of command line arguments to
      instances of nnrpd spawned from innd.

    * A new inn.conf parameter called *pathcluster* has been added: it
      allows appending a common name to the Path header field body on all
      incoming articles.  *pathhost* and *pathalias* (if set) are still
      appended to the path as usual, but *pathcluster* is always appended as
      the last element (e.g. on the leftmost side of the Path header field
      body).  Thanks to Miquel van Smoorenburg for this feature.

    * simpleftp has been rewritten to use "Net::FTP".  Indeed, ftp.pl is no
      longer shipped with Perl 5 and the script did not work.

    * perl-nocem will now check for a timeout and re-open the socket if
      required.  Additionally, perl-nocem will switch to "cancel_ctlinnd" in
      case "cancel_nntp" fails after sending the Message-ID.  Thanks to
      Christoph Biedl for the patch.  A more detailed documentation has also
      been written for perl-nocem(8).

    * The RADIUS configuration is now wrapped in a "server {}" block in
      radius.conf.

    * Checkgroups when there is nothing to change no longer result in
      sending a blank mail to administrators.  Besides, no mail is sent by
      controlchan for the creation of a newsgroup when the action is "no
      change".

    * Checkgroups are now properly propagated even though the news server
      does not carry the groups they are posted to.

    * controlchan and docheckgroups now handle wire format messages so that
      articles from the spool can be directly fed to them.

    * Newgroup control messages for existing groups now change their
      description.  If a mail is sent to administrators, it reminds them to
      update their newsgroups file.  It also warns when there are missing or
      obsolete descriptions.  Furthermore, the newsgroups file is now
      written prettier (from one to three tabulations between the name of
      the group and its short description) and to.* groups cannot be
      created.

    * The sample control.ctl file has been extensively updated.

    * Fixed empty LISTGROUP replies which were not terminated.  Thanks to
      David Canzi for the patch.

    * In response to a LIST [*file*] command, if the file does not exist, we
      assume it is not maintained and return "503" instead of "215" and an
      empty file.  Moreover, capability to LIST ACTIVE.TIMES for a wildmat
      pattern as its third argument has been added in order to select wanted
      newsgroups.

    * inews now tries to authenticate if it does not receive a "200" return
      code after MODE READER.  Indeed, it might be able to post even with a
      "201" return code and also with another codes like "440" or "480".

    * If creating a new history file, set the ownership and mode
      appropriately.  inncheck also expects fewer things to be private to
      the news user.  Most of the configuration files will never contain
      private information like passwords.

    * Other minor bug fixes and documentation improvements.

Changes in 2.4.3 (2006-03-20)

    * Previous versions of INN had an optimization for handling "XHDR
      Newsgroups" that used the Xref header field from overview.  While this
      does make the command much faster, it doesn't produce accurate results
      and breaks the NNTP protocol, so this optimization has been removed.

    * Fixed a bug in innd that allowed it to accept articles with duplicated
      header fields if the header field occurred an odd number of times. 
      Modified the programs for rebuilding overview to use the last Xref
      header field if there are multiple ones to avoid problems with spools
      that contain such invalid articles.

    * Fixed yet another problem with verifying that a user has permissions
      to approve posts to a moderated group.  Thanks, Jens Schlegel.

    * Increase the send and receive buffer on the Unix domain socket used by
      ctlinnd.  This should allow longer replies (particularly for innstat)
      on platforms with very low default Unix domain socket buffer sizes.

    * rnews's handling of articles with null characters, NNTP errors, header
      problems, and deferrals has been significantly improved.

    * Thomas Parmelan added support to send-uucp for specifying the funnel
      or exploder site to flush for feeds managed through one and fixed a
      problem with picking up old stranded work files.

    * Many other more minor bug fixes, optimization improvements, and
      documentation fixes.

Changes in 2.4.2 (2004-12-22)

    * INN is now licensed under a less restrictive license (about as
      minimally restrictive as possible shy of public domain), and the
      clause similar to the old BSD advertising clause has been dropped.

    * "make install" and "make update" now always install the newly built
      binaries, rather than only installing them if the modification times
      are newer.  This is the behavior that people expect.  "make install"
      now also automatically builds a new (empty) history database if one
      doesn't already exist.

    * The embedded Tcl filter code has been disabled (and will be removed
      entirely in the next major release of INN).  It hasn't worked for some
      time and causes innd crashes if compiled in (even if not used).  If
      someone wants to step forward and maintain it, I recommend starting
      from scratch and emulating the Perl and Python filters.

    * ctlinnd should now successfully handle messages from INN up to the
      maximum allowable packet size in the protocol, fixing problems sites
      with many active peers were having with innstat output.

    * Overview generation has been fixed in both makehistory and innd to
      follow the rules in the latest NNTP draft rather than just replacing
      special characters with spaces.  This means that the unfolding of
      folded header fields will not introduce additional, incorrect
      whitespace in the overview data.

    * nnrpd now uniformly responds with a "480" or "502" status code to
      attempts to read a newsgroup to which the user does not have access,
      depending on whether the user has authenticated.  Previously, it
      returned a "411" status code, claiming the group didn't exist, which
      confuses the reactive authentication capability of news readers.

    * If a user is not authorized to approve articles (using the "A"
      *access* control in readers.conf), articles that include an Approved
      header field will be rejected even if posted to unmoderated groups. 
      Some other site may consider that group to be moderated.

    * The configuration parser used for readers.conf and others now
      correctly handles "#" inside quoted strings and is more robust against
      unmatched double quotes.

    * Messages mailed to moderators had two spaces after the colons in the
      header fields, rather than one.  This bug has been fixed.

    * A bug that could cause heap corruption and random crashes in innd if
      INN were compiled with Python support has been fixed.

    * Some problems with innd's tracking of article size and enforcement of
      the configured maximum article size have been fixed.

    * pgpverify will now correctly verify signatures generated by GnuPG and
      better supports GnuPG as the PGP implementation.

    * INN's code should now be more 64-bit clean in its handling of size_t,
      pointer differences, and casting of pointers, correcting problems that
      showed up on 64-bit platforms like AMD64.

    * Improved the error reporting in the history database code, in inews,
      in controlchan, and in expire.

    * Many other, more minor bugs have also been fixed.

Changes in 2.4.1 (2004-01-07)

    * SECURITY: Handle the special filing of control messages into per-type
      newsgroups more robustly.  This closes a potentially exploitable
      buffer overflow.  Thanks to Dan Riley for his excellent bug report.

    * Fixed article handling in innd so that articles without a Path header
      field (arising from peers sending incorrectly formatted articles or
      injecting incorrectly formatted articles through rnews) would not
      cause innd to crash.  (This was not exploitable.)

    * Fixed a serious bug in XPAT handling, thanks to Tommy van Leeuwen.

    * "configure" now looks for sendmail only in /usr/sbin and /usr/lib, not
      on the user's path.  This should reduce the need for --with-sendmail
      if your preferred sendmail is in a standard location.

    * The robustness of the tradindexed overview method has been further
      increased, handling more edge cases arising from corrupted databases
      and oddly-named newsgroups.

    * innd now never decreases the high water mark of a newsgroup when
      renumbering, which should help ameliorate overview and active file
      synchronization problems.

    * Do not close and reopen the history file on ctlinnd reload when the
      server is paused or throttled.  This was breaking ctlinnd reload all
      during a server pause.

    * Various minor portability and compilation issues fixed.  Substantial
      numbers of compiler warnings have been cleaned up, thanks largely to
      work by Ilya Kovalenko.

    * Multiple other more minor bugs have been fixed.

    * Documentation and man pages have been clarified and updated.

Upgrading from 2.3 to 2.4

    The inn.conf parser has changed between INN 2.3 and 2.4.  Due to that
    change, options in inn.conf that contain whitespace or a few other
    special characters must be quoted with double quotes, and empty
    parameters (parameters with no value) are not allowed.  INN 2.4 comes
    with a script, innupgrade, run automatically during "make update", that
    will attempt to fix any problems that it finds with your inn.conf file,
    saving the original as inn.conf.OLD.

    This change is the beginning of standardization of parsing and syntax
    across all of INN's configuration files.

    The history subsystem now has a standard API that allows other backends
    to be used.  Because of this, you now need to specify the history method
    in inn.conf.  Adding:

        hismethod: hisv6

    will tell INN to use the same history backend as was used in previous
    versions.  innupgrade should take care of this for you.

    ovdb is known to have some locking and timing issues related to how
    nnrpd shuts down (or fails to shut down) the overview databases.  If you
    have stability problems with ovdb, try setting *readserver* to true in
    ovdb.conf.  This will funnel all ovdb reads through a single process
    with a cleaner interface to the underlying Berkeley DB database.

    If you use Perl authentication for nnrpd (if *nnrpdperlauth* in inn.conf
    is true), there have been major changes.  See "Changes to Perl
    Authentication Support for nnrpd" in doc/hook-perl for details.

    Similarly, if you use Python authentication for nnrpd (if
    *nnrpdpythonauth* in inn.conf is true), there have been major changes. 
    See "Changes to Python Authentication and Access Control Support for
    nnrpd" in doc/hook-python for details.

    If you use send-uucp, it has been completely rewritten and now takes a
    configuration file to specify its behavior.  See its man page for more
    information.  If you use sendbatch, it is no longer included in INN
    since the new send-uucp can handle all of the same functionality.

    The wildmat API has been renamed (to uwildmat and friends; see
    uwildmat(3) for the interfaces) to distinguish it from Rich $alz's
    original version, since it now supports UTF-8.  This may require changes
    in other software packages that link against INN's libraries.

    If you are upgrading from a version prior to INN 2.3, see "Upgrading
    from 2.2 to 2.3".

Changes in 2.4.0 (2003-05-06)

    * IPv6 support has been added, disabled by default.  If you have IPv6
      connectivity, build with --enable-ipv6 to try it.  There are no known
      bugs, but please report any problems you find (or even successes, if
      you use an unusual platform).  There are a few changes of interest;
      further information is available in doc/IPv6-info.

    * The tradindexed overview method has been completely rewritten and
      should be considerably more robust in the face of system crashes.  A
      new utility, tdx-util, is provided to examine the contents of the
      overview database, repair inconsistencies, and rebuild the overview
      for particular groups from a tradspool news spool.  See tdx-util(8)
      for more details.

    * The Perl and Python authentication hooks for readers have been
      extensively overhauled and integrated better with readers.conf.  See
      the Changes sections in doc/hook-perl and doc/hook-python for more
      details.

    * nnrpd now optionally supports article injection via IHAVE, see
      readers.conf(5).  Any articles injected this way must have Date, From,
      Message-ID, Newsgroups, Path, and Subject header fields.  X-Trace and
      X-Complaints-To header fields will be added if the appropriate options
      are set in readers.conf, but other header fields will not be
      modified/inserted (e.g. NNTP-Posting-Host, NNTP-Posting-Date,
      Organization, Lines, Cc, Bcc, and To header fields).

    * nnrpd now handles arbitrarily long lines in POST and IHAVE;
      administrators who want to limit the length of lines in locally posted
      articles will need to add this to their local filters instead.

    * nnrpd no longer handles the poorly-specified RFC 977 optional fourth
      argument to the NEWGROUPS command specifying the "distributions" that
      the command was supposed to apply to.

      Clients that use that argument will break.  There are not believed to
      be any such clients, and it's easy enough to just filter the returned
      list of newsgroups (which is generally fairly short) to achieve the
      same results.

    * nnrpd no longer accepts UTC as a synonym for GMT for NEWGROUPS or
      NEWNEWS.  This usage was never portable, and was rejected by the NNTP
      working group.  It is being removed now in the hope that it will be
      caught before anyone starts to rely on it.

    * innfeed supports a new peer parameter, *backlog-feed-first*, that if
      set to true feeds any backlog to a peer before new articles, see
      innfeed.conf(5).  When used in combination with *max-connections* set
      to "1", this can be used to enforce in-order delivery of messages to a
      peer that is doing Xref slaving, avoiding cases where a
      higher-numbered message is received before a lower-numbered message in
      the same group.

    * Several other, more minor protocol issues have been fixed: connections
      rejected due to the connection rate limiting in innd receive "400"
      replies instead of "504" or "505", and ARTICLE without an argument
      will always either retrieve the current article or return a "423"
      error, never advance the current article number to the next valid
      article.

      See doc/compliance-nntp for all of the known issues with INN's
      compliance with the current NNTP draft.

    * All accesses to the history file for all parts of INN now go through a
      generic API like the storage and overview subsystems do.  This will
      eventually allow new history implementations to be dropped in without
      affecting the rest of INN, and will significantly improve the
      encapsulation of the history subsystem.  See the libinnhist(3) man
      page for the details of the interface.

    * INN now uses a new parser for the inn.conf file.  This means that
      parameters containing whitespace or other special characters must now
      be quoted; see inn.conf(5).  It fixes the long-standing bug that
      certain values must be included in inn.conf even if using the defaults
      for the use of shell or Perl scripts, and it will serve as the basis
      for standardizing and cleaning up the configuration file parsing in
      other parts of INN.  innupgrade is run during "make update" and should
      convert an existing inn.conf file for you.

    * send-uucp has been replaced by a completely rewritten version from
      Marco d'Itri, Edvard Tuinder, and Miquel van Smoorenburg, which uses a
      configuration file that specifies batch sizes, compression methods,
      and hours during which batches should be generated.  The old sendbatch
      script has been retired, since send-uucp can now handle everything
      that it did.

    * Two "configure" options have changed names: --with-tmp-path is now
      --with-tmp-dir, and --with-largefiles is now --enable-largefiles, to
      improve consistency and better match the "autoconf" option guidelines.

    * Variables can now be used in the newsfeeds file to make it easier to
      specify many similar feeds or feed patterns.  See the newsfeeds(5) man
      page for details.

    * Local connections to INN support a new special mode, MODE CANCEL, that
      allows efficient batch cancellation of messages.  This is intended to
      be the preferred interface for external spam and abuse filters like
      NoCeM.  See "CANCEL FEEDS" in innd(8) for details.

    * Two new options, *nfsreader* and *nfswriter*, have been added to
      inn.conf to aid in building NFS based shared reader/writer platforms. 
      On the writer server, configure *nfswriter* to true and on all of the
      readers, configure *nfsreader* to true; these options add calls to
      force data out to the NFS server and force it to be read directly from
      the NFS server at the appropriate moments.  Note that it has only been
      tested on Solaris 8, using CNFS as the storage mechanism and
      tradindexed as the overview method.

    * A new option, *tradindexedmmap*, has been added to inn.conf.  If set
      to true (the default), then the tradindexed overview method will use
      "mmap()" to access its overview data (in 2.3 you couldn't control
      this; it always used mmap).

    * Thanks to code contributed by CMU, innfeed can now feed an IMAP server
      as well as other NNTP servers.  See the man page for innfeed(8) for
      more information.

    * An authenticator, auth_smb, that checks a username and password
      against a remote Samba server is now included.  See auth_smb(8) for
      details.

    * The wildmat functions in INN now support UTF-8, in a way that should
      allow them to still work with most simple 8-bit character sets in
      widespread use.  As part of this change, some additional wildmat
      interfaces are now available and the names have changed (to uwildmat,
      where "u" is for Unicode).  See uwildmat(3) for the details.

    * The interface between external authenticators and nnrpd is now
      properly documented, in doc/external-auth.  A library implementing
      this interface in C is provided, which should make it easier to write
      additional authenticators resolvers.  See libauth(3) for details, and
      any of the existing programs in authprogs/ for examples.

    * INN now checks to ensure that the configured temporary directory is
      not world-writeable.  Additionally, most (if not all) of the temporary
      file creation in INN now uses functions that create temporary files
      properly and safely.

    * All of the applicable bug fixes from the INN 2.3 STABLE series are
      also included in INN 2.4.

Changes in 2.3.5 (2003-03-09)

    * Clients using POST are no longer permitted to provide an Injector-Info
      header field.

    * Fixed a bug causing posts with a Followup-To header field set to a
      moderated group to be rejected if the posting user didn't have
      permission to approve postings.

    * Fixed bugs in inncheck with setuid rnews or setgid inews, in
      innconfval with inn.conf parameters containing shell metacharacters
      but no spaces, and in parsedate.y with some versions of yacc.  Fixed a
      variety of size-related printf format warnings (e.g., "%d" vs. "%ld")
      thanks to the work of Winfried Szukalski.

Changes in 2.3.4 (2002-12-22)

    * LIST ACTIVE no longer returns data when given a single group argument
      if the client is not authorized to read that group.

    * XHDR and XPAT weren't correctly parsing article header fields,
      resulting in searches for the header field name "newsgroup" matching
      the header field name "newsgroups".

    * Made CNFS more robust against crashes by actually syncing the cycbuff
      headers to disk as was originally intended.

    * Fixed a memory leak in the tradspool code.

    * Two bugs in pgpverify when using GnuPG were fixed: it now correctly
      checks for gpgv (rather than pgp) when told to use GnuPG and expects
      the keyring to be pubring.gpg (not pubring.pgp).

    * Substantial updates to the sample provided control.ctl file.

    * Compilation fixes with Perl 5.8.0, Berkeley DB 4.x, current versions
      of Linux (including with large file support), and Tru64.  inndf fixes
      for ReiserFS.

    * Various bugs in the header handling in nnrpd have been fixed,
      including hangs when using virtual domains and improper processing of
      folded header fields under certain circumstances.

    * Other minor bug fixes and documentation improvements.

Changes in 2.3.3 (2002-04-25)

    * pgpverify now supports using GnuPG to check signatures (rather than
      PGP) without the pgpgpg wrapper.  GnuPG can check both old-style RSA
      signatures and new OpenPGP signatures and is recommended over PGP 2.6.
      If you have GnuPG installed, pgpverify will use it rather than PGP,
      which means that you may have to create a new key ring for GnuPG to
      use to verify signatures if you were previously using PGP.

    * Users can no longer post articles containing Approved header fields to
      moderated groups by default; they must be specifically given that
      permission with the *access* parameter in readers.conf.  See the man
      page for more details.

    * Two bugs in repacking overview index files and a reliability bug with
      writing overview data were all fixed in the tradindexed overview
      method, hopefully making it somewhat more reliable, particularly for
      makehistory.

    * If rc.news.local exists in the INN binary directory, it will be run
      with the start or stop argument whenever rc.news is run.  This is
      available as a hook for local startup and shutdown code.

    * The default history table hash sizes were increased because a
      too-small value can cause serious performance problems (whereas a
      too-large hash just wastes a bit of disk space).

    * The sample control.ctl file has been extensively updated.

    * Wildmat exclusions ("@" and "!") should now work properly in
      storage.conf newsgroup patterns.

    * The implementation of the -w flag for expireover was fixed;
      previously, the value given to -w to change expireover's notion of the
      current time was scaled by too much.

    * Various other more minor bug fixes, standards compliance fixes, and
      documentation improvements.

Changes in 2.3.2 (2001-04-27)

    * innxmit can again handle regular filenames as input as well as storage
      API tokens (allowing it to be used to import an old traditional
      spool).

    * Several problems with tagged-hash history files have been fixed thanks
      to the debugging efforts of Andrew Gierth and Sang-yong Suh.

    * A very long-standing (since INN 1.0!) NNTP protocol bug in nnrpd was
      fixed.  The response to an ARTICLE command retrieving a message by
      Message-ID should have the Message-ID as the third word of the
      response, not the fourth.  Fixing this is reported to *possibly* cause
      problems with some Netscape browsers, but other news servers correctly
      follow the protocol.

    * Some serious performance problems with expiration of tradspool should
      now be at least somewhat alleviated.  tradspool and timehash now know
      how to output file names for removal rather than tokens, and fastrm's
      ability to remove regular files has been restored.  This should bring
      expiration times for tradspool back to within a factor of two of
      pre-storage-API expiration times.

    * Added a sample subscriptions file and documentation for it and
      innmail.

    * Various other bug fixes and documentation updates.

Changes in 2.3.1 (2001-01-11)

    * inews no longer downloads the active file, no longer tries to send
      postings to moderated groups to the moderator directly, and in general
      duplicates less of the functionality of nnrpd, instead letting nnrpd
      handle it.  This fixes the problem of inews not working properly for
      users other than news without being setgid.

    * Added a man page for ckpasswd.

    * A serious bug in the embedded Perl authentication hooks was fixed,
      thanks to Jan Rychter.

    * The annoying compilation problem with embedded Perl filtering on Linux
      systems without libgdbm installed should be fixed.

    * INN now complains loudly at configure time if the configured path for
      temporary files is world-writeable, since this configuration can be a
      security hole.

    * Many other varied bug fixes and documentation fixes of all sorts.

Upgrading from 2.2 to 2.3

    Simply doing a "make update" is not sufficient to upgrade; the history
    and overview information will also have to be regenerated, since the
    formats of both files have changed between 2.2 and 2.3.  Regardless of
    whether you were using the storage API or traditional spool under 2.2,
    you'll need to rebuild your overview and history files.  You will also
    need to add a storage.conf file, if you weren't using the storage API
    under INN 2.2.  A good default storage.conf file for 2.2 users would be:

        method tradspool {
            newsgroups: *
            class: 0
        }

    Create this storage.conf file before rebuilding history or overview.

    If you want to allow readers, or if you want to expire based on
    newsgroup name, you need to tell INN to generate overview data and pick
    an overview method by setting *ovmethod* in inn.conf.  See INSTALL and
    inn.conf(5) for more details.

    The code that generates the dbz index files has been split into a
    separate program, makedbz.  makehistory still generates the base history
    file and the overview information, but some of its options have been
    changed.  To rebuild the history and overview files, use something like:

        makehistory -b -f history.n -O -T /usr/local/news/tmp -l 600000

    (change the /usr/local/news/tmp path to some directory that has plenty
    of temporary space, and leave off -O if you're running a transit-only
    server and don't intend to expire based on group name, and therefore
    don't need overview.)  Or if your overview is buffindexed, use:

        makehistory -b -f history.n -O -F

    Both will generate a new history file as history.n and rebuild overview
    at the same time.  If you want to preserve a record of expired
    Message-IDs in the history file, run:

        awk 'NF==2 { print; }' < history >> history.n

    to append them to the new history file you created above.  Look over the
    new history file and make sure it looks right, then generate the new
    index files and move them into place:

        makedbz -s `wc -l < history.n` -f history.n
        mv history.n history
        mv history.n.dir history.dir
        mv history.n.hash history.hash
        mv history.n.index history.index

    (Rather than .hash and .index files, you may have a .pag file if you're
    using tagged hash.)

    For reader machines, nnrp.access has been replaced by readers.conf. 
    There currently isn't a program to convert between the old format and
    the new format (if you'd like to contribute one, it would be welcomed
    gratefully).  The new file is unfortunately considerably more complex as
    a result of its new capabilities; please carefully read the example
    readers.conf provided and the man page when setting up your initial
    configuration.  The provided commented-out examples cover the most
    common installation (IP-based authentication for all machines on the
    local network).

    INN makes extensive use of mmap(2) for the new overview mechanisms, so
    at the present time NFS-mounting the spool and overview on multiple
    reader machines from one central server probably isn't feasible in this
    version.  mmap tends to interact poorly with NFS (at the least, NFS
    clients won't see updates to the mapped files in situations where they
    should).  (The preferred way to fix this would, rather than backing out
    the use of mmap or making it optional, to add support for Diablo-style
    header feeds and pull-on-demand of articles from a master server.)

    The flags for overchan have changed, plus you probably don't want to run
    overchan at all any more.  Letting innd write overview data itself
    results in somewhat slower performance, but is more reliable and has a
    better failure mode under high loads.  Writing overview data directly is
    the default, so in a normal upgrade from 2.2 to 2.3 you'll want to
    comment out or remove your overchan entry in newsfeeds and set
    *useoverchan* to false in inn.conf.

    crosspost is no longer installed, and no longer works (even with
    traditional spool).  If you have an entry for crosspost in newsfeeds,
    remove it.

    If you're importing a traditional spool from a pre-storage API INN
    server, it's strongly recommended that you use NNTP to feed the articles
    to your new server rather than trying to build overview and history
    directly from the old spool.  It's more reliable and ensures that
    everything gets put into the right place.  The easiest way to do this is
    to generate, on your old server, a list of all of your existing article
    files and then feed that list to innxmit.  Further details can be found
    in the FAQ at <https://www.eyrie.org/~eagle/faqs/inn.html>.

    If you are using a version of Cleanfeed that still has a line in it
    like:

        $lines = $hdr{'__BODY__'} =~ tr/\n/\n/;

    you will need to change this line to:

        $lines = $hdr{'__LINES__'};

    to work with INN 2.3 or later.  This is due to an internal optimization
    of the interface to embedded filters that's new in INN 2.3.

Changes in 2.3.0 (2000-08-21)

    * New readers.conf file (replaces nnrp.access) which allows more
      flexible specification of access restrictions.  Included in the sample
      implementations is a RADIUS-based authenticator.

    * Unified overview has been replaced with an overview API, and there are
      now three separate overview implementations to choose from.  One
      (tradindexed) is very like traditional overview but uses an additional
      index file.  The second (buffindexed) uses large buffers rather than
      separate files for each group and can handle a higher incoming article
      rate while still being fast for readers.  The third (ovdb) uses
      Berkeley DB to store overview information (so you need to have
      Berkeley DB installed to use it).  The *ovmethod* key in inn.conf
      chooses the overview method to use.

      Note that ovdb has not been as widely tested as the other overview
      mechanisms and should be considered experimental.

    * All article storage and retrieval is now done via the storage API. 
      Traditional spool is now available as a storage type under the storage
      API.  (Note that the current traditional spool implementation causes
      nightly expire to be extremely slow for a large number of articles, so
      it's not recommended that you use the tradspool storage method for the
      majority of a large spool.)

    * The timecaf storage method has been added, similar to timehash but
      storing multiple articles in a single file.  See INSTALL for details
      on it.

    * INN now supports embedded Python filters as well as Perl and Tcl
      filters, and supports Python authentication hooks.

    * There is preliminary support for news reading over SSL, using OpenSSL.

    * To simplify anti-abuse filtering, and to be more compliant with news
      standards and proposed standards, INN now treats as control messages
      only articles containing a Control header field.  A Subject header
      field body beginning with "cmsg " is no longer sufficient for a
      message to be considered a control message, and the Also-Control
      header field is no longer supported.

    * The INN build system no longer uses "subst".  (This will be
      transparent to most users; it's an improvement and modernization of
      how INN is configured.)

    * The build and installation system has been substantially overhauled. 
      "make update" now updates scripts as well as binaries and
      documentation, there is better support for parallel builds ("make
      -j"), there is less "make" recursion, and far more of the
      system-dependent configuration is handled directly by "autoconf". 
      libtool build support (including shared library support) should be
      better than previous releases.

    * All of the applicable bug fixes from the INN 2.2 STABLE series are
      also included in INN 2.3.

Changes in 2.2.3 (2000-07-21)

    * INN no longer installs inews setgid news or rnews setuid root by
      default.  If you need the old behavior, --enable-uucp-rnews and/or
      --enable-setgid-inews must be given to "configure".  See INSTALL for
      more information.

    * A security hole when *verifycancels* is turned on in inn.conf (not the
      default) was fixed.

    * Message-IDs are now limited to 250 octets to prevent interoperability
      problems with other servers.

    * Various other security paranoia fixes have been made.

    * Embedded Perl filters fixed to work with Perl 5.6.0.

    * Lots of bug fixes.

Changes in 2.2.2 (1999-12-13)

    * Various minor bug fixes and a Y2K bug fix.  The Y2K bug is in version
      2.2.1 only and will show up after Jan 1st, 2000 when a news reader
      issues a NEWNEWS command for a date prior to the year 2000.

Changes in 2.2.1 (1999-08-25)

    * Various bug fixes, mostly notably fixes for potential buffer overflow
      security vulnerabilities.

Changes in 2.2.0 (1999-01-21)

    * New storage.conf file (replaces storage.ctl).

    * New (optional) way of handling non-cancel control messages
      (controlchan) that serializes them and prevents server overload from
      control message storms.

    * Support for actsyncd to fetch active file with ftp; configured by
      default to use <ftp://ftp.isc.org/pub/usenet/CONFIG/active.Z> if you
      run actsyncd.  Be sure to read the manual page for actsync to
      configure an actsync.ign file for your site, and test simpleftp if you
      do not "configure" with wget or ncftp.  Also see
      <https://ftp.isc.org/pub/usenet/CONFIG/README>.

    * Some options to "configure" are now moved to inn.conf
      (*merge-to-groups* and *pgp-verify*, without the hyphen).

    * inndf, a portable version of df(1), is supplied.

    * New cnfsstat program to show stats of CNFS buffers.

    * news2mail and mailpost programs for gatewaying news to mail and mail
      to news are supplied.

    * pullnews program for doing a sucking feed is provided (not meant for
      large feeds).

    * The innshellvars.csh.in script is obsolete (and lives in the obsolete
      directory, for now).

