VIFM(1) 							       VIFM(1)



1mNAME0m
       vifm - vi file manager

1mSYNOPSIS0m
       vifm [OPTION]...
       vifm [OPTION]... path
       vifm [OPTION]... path path

1mDESCRIPTION0m
       Vifm is an ncurses based file manager with vi like keybindings.	If you
       use vi, vifm gives you complete keyboard control over your files  with-
       out having to learn a new set of commands.

1mOPTIONS0m
       vifm  starts  in  the  current directory unless it is given a different
       directory on the command line or 'vifminfo' option includes  "savedirs"
       (in which case last visited directories are used as defaults).

       1m-	22mRead list of files from standard input stream and compose custom
	      view out of them (see "Custom views" section).  Current  working
	      directory is used as a base for relative paths.

       1m<path> 22mStarts Vifm in the specified path.

       1m<path> <path>0m
	      Starts Vifm in the specified paths.

       Specifying  two	directories  triggers split view even when vifm was in
       single-view mode on finishing previous run.  To suppress this behaviour
       :only command can be put in the vifmrc file.

       When only one path argument is found on command-line, the left/top pane
       is automatically set as the current view.

       Paths to files are also allowed in case you want  vifm  to  start  with
       some archive opened.

       1m--select <path>0m
	      Open  parent  directory  of  the given path and select specified
	      file in it.

       1m-f	22mMakes  vifm	instead  of  opening  files  write   selection	 to
	      $VIFM/vimfiles and quit.

       1m--choose-files <path>|-0m
	      Sets  output  file  to  write  selection into on exit instead of
	      opening files.  "-" means standard output.  Use empty  value  to
	      disable it.

       1m--choose-dir <path>|-0m
	      Sets  output  file to write last visited directory into on exit.
	      "-" means standard output.  Use empty value to disable it.

       1m--delimiter <delimiter>0m
	      Sets separator for list of  file	paths  written	out  by  vifm.
	      Empty  value  means null character.  Default is new line charac-
	      ter.

       1m--on-choose <command>0m
	      Sets command to be executed on selected files instead of opening
	      them.   The  command may use any of macros described in "Command
	      macros" section below.  The command is executed once  for  whole
	      selection.

       1m--logging[=<startup log path>]0m
	      Log some operational details $VIFM/log.  If the optional startup
	      log path is specified and permissions allow to open it for writ-
	      ing, then logging of early initialization (before value of $VIFM
	      is determined) is put there.

       1m--server-list0m
	      List available server names and exit.

       1m--server-name <name>0m
	      Name of target or this instance (sequential numbers are appended
	      on name conflict).

       1m--remote0m
	      Sends  the rest of the command line to another instance of vifm,
	      --server-name is treated just like any other argument and should
	      precede  --remote on the command line.  When there is no server,
	      quits silently.  There is no limit on how many arguments can  be
	      processed.  One can combine --remote with -c <command> or +<com-
	      mand> to execute commands in already running instance  of  vifm.
	      See also "Client-Server" section below.

       1m--remote-expr0m
	      passes  expression  to  vifm server and prints result.  See also
	      "Client-Server" section below.

       1m-c <command> or +<command>0m
	      Run command-line mode <command> on startup.   Commands  in  such
	      arguments are executed in the order they appear in command line.
	      Commands with spaces or special symbols must be enclosed in dou-
	      ble  or  single  quotes or all special symbols should be escaped
	      (the exact syntax strongly depends on shell).  "+"  argument  is
	      equivalent to "$" and thus picks last item of of the view.

       1m--help, -h0m
	      Show a brief command summary and exit vifm.

       1m--version, -v0m
	      Show version information and quit.

       1m--no-configs0m
	      Skip reading vifmrc and vifminfo.


       See "Startup" section below for the explanations on $VIFM.

1mGeneral keys0m
       1mCtrl-C or Escape0m
	      cancel most operations (see "Cancellation" section below), clear
	      all selected files.

       1mCtrl-L 22mclear and redraw the screen.

1mBasic Movement0m
       The basic vi key bindings are used to move through the files and pop-up
       windows.

       1mk, gk, or Ctrl-P0m
	      move cursor up one line.

       1mj, gj or Ctrl-N0m
	      move cursor down one line.

       1mh	22mwhen  'lsview'  is  off  move  up one directory (moves to parent
	      directory node in tree view), otherwise move left one file.

       1ml	22mwhen 'lsview' is off move into a directory  or  launch  a  file,
	      otherwise move right one file.  See "Selection" section below.

       1mgg	22mmove to the first line of the file list.

       1mG	22mmove to the last line in the file list.

       1mgh	22mgo  up one directory regardless of view representation (regular,
	      ls-like).  Also can be used to leave custom views including tree
	      view.

       1mgl or Enter0m
	      enter  directory	or  launch  a  file.   See "Selection" section
	      below.

       1mH	22mmove to the first file in the window.

       1mM	22mmove to the file in the middle of the window.

       1mL	22mmove to the last file in the window.

       1mCtrl-F or Page Down0m
	      move forward one page.

       1mCtrl-B or Page Up0m
	      move back one page.

       1mCtrl-D 22mjump back one half page.

       1mCtrl-U 22mjump forward one half page.

       1mn%	22mmove to the file that is n percent from the top of the list (for
	      example 25%).

       1m0 or ^ 22mmove  cursor  to the first column.  See 'lsview' option descrip-
	      tion.

       1m$	22mmove cursor to the last column.  See  'lsview'  option  descrip-
	      tion.

       1mSpace	22mswitch file lists.

       1mgt	22mswitch to the next tab (wrapping around).

       1m{n}gt	22mswitch to the tab number {n} (wrapping around).

       1mgT	22mswitch to the previous tab (wrapping around).

       1m{n}gT	22mswitch to {n}-th previous tab.

1mMovement with Count0m
       Most  movement  commands  also  accept  a count, 12j would move down 12
       files.

       1m[count]%0m
	      move to percent of the file list.

       1m[count]j0m
	      move down [count] files.

       1m[count]k0m
	      move up [count] files.

       1m[count]G or [count]gg0m
	      move to list position [count].

       1m[count]h0m
	      go up [count] directories.

1mScrolling panes0m
       1mzt	22mredraw pane with file in top of list.

       1mzz	22mredraw pane with file in center of list.

       1mzb	22mredraw pane with file in bottom of list.

       1mCtrl-E 22mscroll pane one line down.

       1mCtrl-Y 22mscroll pane one line up.

1mPane manipulation0m
       Second character can be entered with or without Control key.

       1mCtrl-W H0m
	      move the pane to the far left.

       1mCtrl-W J0m
	      move the pane to the very bottom.

       1mCtrl-W K0m
	      move the pane to the very top.

       1mCtrl-W L0m
	      move the pane to the far right.


       1mCtrl-W h0m
	      switch to the left pane.

       1mCtrl-W j0m
	      switch to the pane below.

       1mCtrl-W k0m
	      switch to the pane above.

       1mCtrl-W l0m
	      switch to the right pane.


       1mCtrl-W b0m
	      switch to bottom-right window.

       1mCtrl-W t0m
	      switch to top-left window.


       1mCtrl-W p0m
	      switch to previous window.

       1mCtrl-W w0m
	      switch to other pane.


       1mCtrl-W o0m
	      leave only one pane.

       1mCtrl-W s0m
	      split window horizontally.

       1mCtrl-W v0m
	      split window vertically.


       1mCtrl-W x0m
	      exchange panes.

       1mCtrl-W z0m
	      quit preview pane or view modes.


       1mCtrl-W -0m
	      decrease size of the view by count.

       1mCtrl-W +0m
	      increase size of the view by count.

       1mCtrl-W <0m
	      decrease size of the view by count.

       1mCtrl-W >0m
	      increase size of the view by count.


       1mCtrl-W |0m
	      set current view size to count.

       1mCtrl-W _0m
	      set current view size to count.

       1mCtrl-W =0m
	      make size of two views equal.

       For  Ctrl-W +, Ctrl-W -, Ctrl-W <, Ctrl-W >, Ctrl-W | and Ctrl-W _ com-
       mands count can be given before and/or  after  Ctrl-W.	The  resulting
       count  is  a  multiplication of those two.  So "2 Ctrl-W 2 -" decreases
       window size by 4 lines or columns.

       Ctrl-W | and Ctrl-W _ maximise current view by default.

1mMarks0m
       Marks are set the same way as they are in vi.

       You can use these characters for marks [a-z][A-Z][0-9].

       1mm[a-z][A-Z][0-9]0m
	      set a mark for the file at the current cursor position.

       1m'[a-z][A-Z][0-9]0m
	      navigate to the file set for the mark.


       There are also several special marks that can't be set manually:

	 - ' (single quote) - previously visited directory of the  view,  thus
	   hitting '' allows switching between two last locations

	 - < - the first file of the last visually selected block

	 - > - the last file of the last visually selected block

1mSearching0m
       1m/regular expression pattern0m
	      search  for  files matching regular expression in forward direc-
	      tion and advance cursor to next match.

       1m/	22mperform forward search with top item of search pattern  history.

       1m?regular expression pattern0m
	      search  for files matching regular expression in backward direc-
	      tion and advance cursor to previous match.

       1m?	22mperform backward search with top item of search pattern history.

       Trailing  slash	for directories is taken into account, so /\/ searches
       for directories and symbolic links to directories.  At  the  moment  //
       works  too, but this can change in the future, so consider escaping the
       slash if not typing pattern by hand.

       Matches	are  automatically  selected  if  'hlsearch' is set.  Enabling
       'incsearch' makes search  interactive.	'ignorecase'  and  'smartcase'
       options affect case sensitivity of search queries as well as local fil-
       ter and other things detailed in the description of 'caseoptions'.


       1m[count]n0m
	      go  to  the  next file matching last search pattern.  Takes last
	      search direction into account.

       1m[count]N0m
	      go to the previous file matching	last  search  pattern.	 Takes
	      last search direction into account.

       If  'hlsearch'  option  is set, hitting n/N to perform search and go to
       the first matching item resets current selection in normal mode.  It is
       not the case if search was already performed on files in the directory,
       thus selection is not reset after clearing selection  with  escape  key
       and hitting n/N key again.

       Note: vifm uses extended regular expressions for / and ?.


       1m[count]f[character]0m
	      search  forward  for file with [character] as first character in
	      name.  Search wraps around the end of the list.

       1m[count]F[character]0m
	      search backward for file with [character] as first character  in
	      name.  Search wraps around the end of the list.

       1m[count];0m
	      find the next match of f or F.

       1m[count],0m
	      find the previous match of f or F.

       Note:  f,  F,  ; and , wrap around list beginning and end when they are
       used alone and they don't wrap when they are used as selectors.

1mFile Filters0m
       There are three basic file filters:

	 - dot files filter (does not affect "." and ".." special directories,
	   whose  appearance is controlled by the 'dotdirs' option), see 'dot-
	   files' option;

	 - permanent filter;

	 - local filter (see description of the "=" normal mode command).

       Permanent filter essentially allows defining a  group  of  files  names
       which are not desirable to be seen by default, like temporary or backup
       files, which might be created alongside normal  ones.   Just  like  you
       don't usually need to see hidden dot files (files starting with a dot).
       Local filter on the other hand is for temporary immediate filtering  of
       file  list  at hand, to get rid of uninterested files in the view or to
       make it possible to use % range in a :command.

       For the purposes of more  deterministic	editing  permanent  filter  is
       split into two parts:

	 - one edited explicitly via :filter command;

	 - another one which is edited implicitly via zf shortcut.

       Files  are tested against both parts and a match counts if at least one
       of the parts matched.


       Each file list has its own copy of each filter.

       Filtered files are not checked in / search or :commands.

       Files and directories are filtered separately.  This is done by append-
       ing  a  slash to a directory name before testing whether it matches the
       filter. Examples:


	 " filter directories which names end with '.files'
	 :filter /^.*\.files\/$/

	 " filter files which names end with '.d'
	 :filter {*.d}

	 " filter files and directories which names end with '.o'
	 :filter /^.*\.o\/?$/

       Note: vifm uses extended regular expressions.

       The basic vim folding key bindings are used for managing filters.


       1mza	22mtoggle visibility of dot files.

       1mzo	22mshow dot files.

       1mzm	22mhide dot files.

       1mzf	22madd selected files to permanent filter.

       1mzO	22mreset permanent filter.

       1mzR	22msave and reset all filters.

       1mzr	22mclear local filter.

       1mzM	22mrestore all filters (undoes last zR).

       1mzd	22mexclude selection or current file  from  a  custom  view.   Does
	      nothing  for  regular  view.   For tree view excluding directory
	      excludes that sub-tree.  For compare views  zd  hides  group  of
	      adjacent identical files, count can be specified as 1 to exclude
	      just single file or selected items instead.  Files excluded this
	      way are not counted as filtered out and can't be returned unless
	      view is reloaded.

       1m=regular expression pattern0m
	      filter out files that don't match regular  expression.   Whether
	      view  is updated as regular expression is changed depends on the
	      value of the 'incsearch' option.	This kind of filter  is  auto-
	      matically reset when directory is changed.

1mOther Normal Mode Keys0m
       1m[count]:0m
	      enter command line mode.	[count] generates range.

       1mq:	22mopen  external  editor  to prompt for command-line command.	See
	      "Command line editing" section for details.

       1mq/	22mopen external editor to prompt for search pattern to be searched
	      in  forward  direction.	See "Command line editing" section for
	      details.

       1mq?	22mopen external editor to prompt for search pattern to be searched
	      in  backward  direction.	See "Command line editing" section for
	      details.

       1mq=	22mopen external editor to prompt for filter pattern.  See "Command
	      line  editing"  section for details.  Unlike other q{x} commands
	      this one doesn't work in Visual mode.

       1m[count]!! and [count]!<selector>0m
	      enter command line mode with entered ! command.	[count]  modi-
	      fies range.

       1mCtrl-O 22mgo  backwards through directory history of current view.  Nonex-
	      istent directories are automatically skipped.

       1mCtrl-I 22mif 'cpoptions' contains "t" flag, <tab> and <c-i> switch  active
	      pane  just  like <space> does, otherwise it goes forward through
	      directory history of current view.  Nonexistent directories  are
	      automatically skipped.

       1mCtrl-G 22mshow a dialog with detailed information about current file.	See
	      "Menus and dialogs" section for controls.

       1mShift-Tab0m
	      enter view mode (works only  after  activating  view  pane  with
	      :view command).

       1mga	22mcalculate directory size.  Uses cached directory sizes when pos-
	      sible for better performance.  As  a  special  case  calculating
	      size  of	".."  entry  results in calculation of size of current
	      directory.

       1mgA	22mlike ga, but force update.	Ignores  old  values  of  directory
	      sizes.

       If file under cursor is selected, each selected item is processed, oth-
       erwise only current file is updated.

       1mgf	22mfind link destination (like l with 'followlinks' off,  but  also
	      finds directories).  On Windows additionally follows .lnk-files.

       1mgF	22mSame as gf, but resolves final path of  the	chain  of  symbolic
	      links.

       1mgr	22monly for MS-Windows
	      same  as	l  key,  but  tries to run program with administrative
	      privileges.

       1mav	22mgo to visual mode into selection amending state preserving  cur-
	      rent selection.

       1mgv	22mgo to visual mode restoring last selection.

       1m[reg]gs0m
	      when no register is specified, restore last t selection (similar
	      to what gv does for visual  mode	selection).   If  register  is
	      present,	then  all  files listed in that register and which are
	      visible in current view are selected.

       1mgu<selector>0m
	      make names of selected files lowercase.

       1m[count]guu and [count]gugu0m
	      make names of [count] files starting from the current one lower-
	      case.  Without [count] only current file is affected.

       1mgU<selector>0m
	      make names of selected files uppercase.

       1m[count]gUU and [count]gUgU0m
	      make names of [count] files starting from the current one upper-
	      case.  Without [count] only current file is affected.

       1me	22mexplore file in the current pane.

       1mi	22mhandle file (even if it's an executable and 'runexec' option  is
	      set).

       1mcw	22mchange word is used to rename a file or files.

       1mcW	22mchange  WORD is used to change only name of file (without exten-
	      sion).

       1mcl	22mchange link target.

       1mco	22monly for *nix
	      change file owner.

       1mcg	22monly for *nix
	      change file group.

       1m[count]cp0m
	      change file attributes (permission on  *nix  and	properties  on
	      Windows).   If  [count]  is specified, it's treated as numerical
	      argument	for  non-recursive  `chmod`  command  (of   the   form
	      [0-7]{3,4}).  See "Menus and dialogs" section for controls.

       1m[count]C0m
	      clone file [count] times.

       1m[count]dd or d[count]selector0m
	      move  selected  file  or	files  to  trash directory (if 'trash'
	      option is set, otherwise delete).  See "Trash directory" section
	      below.

       1m[count]DD or D[count]selector0m
	      like dd and d<selector>, but omitting trash directory (even when
	      'trash' option is set).

       1mY, [count]yy or y[count]selector0m
	      yank selected files.

       1mp	22mcopy yanked files to the current directory or move the files  to
	      the  current directory if they were deleted with dd or :d[elete]
	      or if the files were yanked from trash  directory.   See	"Trash
	      directory" section below.

       1mP	22mmove the last yanked files.	The advantage of using P instead of
	      d followed by p is that P moves files  only  once.   This  isn't
	      important  in  case  you're moving files in the same file system
	      where your home directory is, but using P to move files on  some
	      other  file  system  (or	file systems, in case you want to move
	      files from fs1 to fs2 and your home is on  fs3)  can  save  your
	      time.

       1mal	22mput symbolic links with absolute paths.

       1mrl	22mput symbolic links with relative paths.

       1mt	22mselect or unselect (tag) the current file.

       1mu	22mundo last change.

       1mCtrl-R 22mredo last change.

       1mdp	22min compare view of "ofboth grouppaths" kind, makes corresponding
	      entry of the other pane equal to the current one.  The semantics
	      is as follows:
	       - nothing done for identical entries
	       - if file is missing in current view, its pair gets removed
	       - if file is missing or differs in other view, it's replaced
	       - file pairs are defined by matching relative paths
	      File  removal obeys 'trash' option.  When the option is enabled,
	      the operation can be undone/redone (although  results  won't  be
	      visible automatically).
	      Unlike  in  Vim,	this  operation  is performed on a single line
	      rather than a set of adjacent changes.

       1mdo	22msame as dp, but applies changes in the opposite direction.

       1mv or V 22menter visual mode, clears current selection.

       1m[count]Ctrl-A0m
	      increment first number in file name by [count] (1 by default).

       1m[count]Ctrl-X0m
	      decrement first number in file name by [count] (1 by default).

       1mZQ	22msame as :quit!.

       1mZZ	22msame as :quit.

       1m.	22mrepeat last command-line command (not normal  mode  command)  of
	      this run (does nothing right after startup or :restart command).
	      The command doesn't depend on command-line history  and  can  be
	      used with completely disabled history.

       1m(	22mgo  to  previous  group.   Groups are defined by primary sorting
	      key.  For name and iname members of each group have  same  first
	      letter, for all other sorting keys vifm uses size, uid, ...

       1m)	22mgo to next group.  See ( key description above.

       1m{	22mspeeds  up  navigation to closest previous entry of the opposite
	      type by moving to the first file backwards when cursor is  on  a
	      directory and to the first directory backwards when cursor is on
	      a file.  This is essentially a special case of ( that is	locked
	      on "dirs".

       1m}	22msame as {, but in forward direction.

       1m[c	22mgo  to previous mismatched entry in directory comparison view or
	      do nothing.

       1m]c	22mgo to next mismatched entry in directory comparison view  or  do
	      nothing.

       1m[d	22mgo to previous directory entry or do nothing.

       1m]d	22mgo to next directory entry or do nothing.

       1m[r	22msame as :siblprev.

       1m]r	22msame as :siblnext.

       1m[R	22msame as :siblprev!.

       1m]R	22msame as :siblnext!.

       1m[s	22mgo to previous selected entry or do nothing.

       1m]s	22mgo to next selected entry or do nothing.

       1m[z	22mgo to first sibling of current entry.

       1m]z	22mgo to last sibling of current entry.

       1mzj	22mgo to next directory sibling of current entry or do nothing.

       1mzk	22mgo to previous directory sibling of current entry or do nothing.

1mUsing Count0m
       You can use count with commands like yy.

       1m[count]yy0m
	      yank count files starting from current cursor position downward.

       Or you can use count with motions passed to y, d or D.

       1md[count]j0m
	      delete  (count  + 1) files starting from current cursor position
	      upward.

1mRegisters0m
       vifm supports multiple registers for temporary storing list  of	yanked
       or deleted files.

       Registers should be specified by hitting double quote key followed by a
       register name.  Count is specified after  register  name.   By  default
       commands use unnamed register, which has double quote as its name.

       Though  all  commands  accept  registers, most of commands ignores them
       (for example H or Ctrl-U).  Other commands can fill register or	append
       new files to it.

       Presently vifm supports ", _, a-z and A-Z characters as register names.

       As mentioned above " is unnamed register and has special meaning of the
       default	register.  Every time when you use named registers (a-z and A-
       Z) unnamed register is updated to contain same list  of	files  as  the
       last used register.

       _  is black hole register.  It can be used for writing, but its list is
       always empty.

       Registers with names from a to z and from A to Z are named ones.   Low-
       ercase  registers  are cleared before adding new files, while uppercase
       aren't and should be used to append new files to the existing file list
       of appropriate lowercase register (A for a, B for b, ...).

       Registers  can be changed on :empty command if they contain files under
       trash directory (see "Trash directory" section below).

       Registers do not contain one file more than once.

       Example:

	 "a2yy

       puts names of two files to register a (and to the unnamed register),

	 "Ad

       removes one file and append its name to register a (and to the  unnamed
       register),

	 p or "ap or "Ap

       inserts previously yanked and deleted files into current directory.

1mSelectors0m
       y,  d, D, !, gu and gU commands accept selectors.  You can combine them
       with any of selectors below to quickly remove or yank several files.

       Most  of  selectors are like vi motions: j, k, gg, G, H, L, M, %, f, F,
       ;, comma, ', ^, 0 and $.  But there are some additional ones.

       1ma	22mall files in current view.

       1ms	22mselected files.

       1mS	22mall files except selected.

       Examples:

	 - dj - delete file under cursor and one below;

	 - d2j - delete file under cursor and two below;

	 - y6gg - yank all files from cursor position to 6th file in the list.

       When you pass a count to whole command and its selector they are multi-
       plied. So:

	 - 2d2j - delete file under cursor and four below;

	 - 2dj - delete file under cursor and two below;

	 - 2y6gg - yank all files from cursor position to  12th  file  in  the
	   list.

1mVisual Mode0m
       Visual mode has two generic operating submodes:

	 - plain selection as it is in Vim;

	 - selection editing submode.

       Both  modes  select files in range from cursor position at which visual
       mode was entered to current cursor position (let's call	it  "selection
       region").  Each of two borders can be adjusted by swapping them via "o"
       or "O" keys and updating cursor position  with  regular	cursor	motion
       keys.   Obviously,  once  initial  cursor position is altered this way,
       real start position becomes unavailable.

       Plain Vim-like visual mode starts with cleared selection, which is  not
       restored  on  rejecting selection ("Escape", "Ctrl-C", "v", "V").  Con-
       trary to it, selection editing doesn't clear previously selected  files
       and  restores  them after reject.  Accepting selection by performing an
       operation on selected items (e.g. yanking them via "y") moves cursor to
       the  top of current selection region (not to the top most selected file
       of the view).

       In turn, selection editing supports three types	of  editing  (look  at
       statusbar to know which one is currently active):

	 - append - amend selection by selecting elements in selection region;

	 - remove - amend  selection  by  deselecting  elements  in  selection
	   region;

	 - invert  -  amend  selection	by  inverting selection of elements in
	   selection region.

       No matter how you activate selection editing  it  starts  in  "append".
       One  can switch type of operation (in the order given above) via "Ctrl-
       G" key.

       Almost all normal mode keys work in visual mode, but instead of accept-
       ing selectors they operate on selected items.

       1mEnter	22msave selection and go back to normal mode not moving cursor.

       1mav	22mleave  visual mode if in amending mode (restores previous selec-
	      tion), otherwise switch to amending selection mode.

       1mgv	22mrestore previous visual selection.

       1mv, V, Ctrl-C or Escape0m
	      leave visual mode if not in amending mode, otherwise  switch  to
	      normal visual selection.

       1mCtrl-G 22mswitch  type of amending by round robin scheme: append -> remove
	      -> invert.

       1m:	22menter command line mode.  Selection is cleared  on  leaving	the
	      mode.

       1mo	22mswitch active selection bound.

       1mO	22mswitch active selection bound.

       1mgu, u	22mmake names of selected files lowercase.

       1mgU, U	22mmake names of selected files uppercase.

1mView Mode0m
       This mode tries to imitate the less program.  List of builtin shortcuts
       can be found below.  Shortcuts can be customized using :qmap, :qnoremap
       and :qunmap command-line commands.

       1mShift-Tab, Tab, q, Q, ZZ0m
	      return to normal mode.

       1m[count]e, [count]Ctrl-E, [count]j, [count]Ctrl-N, [count]Enter0m
	      scroll forward one line (or [count] lines).

       1m[count]y, [count]Ctrl-Y, [count]k, [count]Ctrl-K, [count]Ctrl-P0m
	      scroll backward one line (or [count] lines).

       1m[count]f, [count]Ctrl-F, [count]Ctrl-V, [count]Space0m
	      scroll forward one window (or [count] lines).

       1m[count]b, [count]Ctrl-B, [count]Alt-V0m
	      scroll backward one window (or [count] lines).

       1m[count]z0m
	      scroll forward one window (and set window to [count]).

       1m[count]w0m
	      scroll backward one window (and set window to [count]).

       1m[count]Alt-Space0m
	      scroll forward one window, but don't stop at end-of-file.

       1m[count]d, [count]Ctrl-D0m
	      scroll forward one half-window (and set half-window to [count]).

       1m[count]u, [count]Ctrl-U0m
	      scroll  backward	one  half-window  (and	set   half-window   to
	      [count]).

       1mr, Ctrl-R, Ctrl-L0m
	      repaint screen.

       1mR	22mreload view preserving scroll position.

       1mF	22mtoggle  automatic  forwarding.   Roughly  equivalent to periodic
	      file reload and scrolling to the bottom.	The behaviour is simi-
	      lar to `tail -F` or F key in less.

       1m[count]/pattern0m
	      search forward for ([count]-th) matching line.

       1m[count]?pattern0m
	      search backward for ([count]-th) matching line.

       1m[count]n0m
	      repeat previous search (for [count]-th occurrence).

       1m[count]N0m
	      repeat  previous	search	in  reverse  direction (for [count]-th
	      occurrence).

       1m[count]g, [count]<, [count]Alt-<0m
	      scroll to the first line of the file (or line [count]).

       1m[count]G, [count]>, [count]Alt->0m
	      scroll to the last line of the file (or line [count]).

       1m[count]p, [count]%0m
	      scroll to the beginning of the file (or N percent into file).

       1mv	22minvoke an editor to edit the current  file  being  viewed.	The
	      command  for  editing  is taken from the 'vicmd'/'vixcmd' option
	      value and extended with middle line number prepended by  a  plus
	      sign and name of the current file.

       All  "Ctrl-W  x" keys work the same was as in Normal mode.  Active mode
       is automatically changed on navigating among windows.   When  less-like
       mode  activated	on  file preview is left using one by "Ctrl-W x" keys,
       its state is stored until another file is displayed using preview (it's
       possible  to leave the mode, hide preview pane, do something else, then
       get back to the file and show preview pane again with previously stored
       state in it).

1mCommand line Mode0m
       These keys are available in all submodes of the command line mode: com-
       mand, search, prompt and filtering.

       Down, Up, Left, Right, Home, End and Delete are extended keys and  they
       are  not  available  if	vifm  is compiled with --disable-extended-keys
       option.

       1mEsc, Ctrl-C0m
	      leave command line mode,	cancels  input.   Cancelled  input  is
	      saved into appropriate history and can be recalled later.

       1mCtrl-M, Enter0m
	      execute command and leave command line mode.

       1mCtrl-I, Tab0m
	      complete command or its argument.

       1mShift-Tab0m
	      complete in reverse order.

       1mCtrl-_ 22mstop completion and return original input.

       1mCtrl-B, Left0m
	      move cursor to the left.

       1mCtrl-F, Right0m
	      move cursor to the right.

       1mCtrl-A, Home0m
	      go to line beginning.

       1mCtrl-E, End0m
	      go to line end.

       1mAlt-B	22mgo to the beginning of previous word.

       1mAlt-F	22mgo to the end of next word.

       1mCtrl-U 22mremove  characters  from  cursor  position till the beginning of
	      line.

       1mCtrl-K 22mremove characters from cursor position till the end of line.

       1mCtrl-H, Backspace0m
	      remove character before the cursor.

       1mCtrl-D, Delete0m
	      remove character under the cursor.

       1mCtrl-W 22mremove characters from cursor position  till  the  beginning  of
	      previous word.

       1mAlt-D	22mremove  characters  from  cursor  position till the beginning of
	      next word.

       1mCtrl-T 22mswap the order of current and previous character and move cursor
	      forward  or,  if	cursor past the end of line, swap the order of
	      two last characters in the line.

       1mAlt-.	22minsert last part of previous command to current cursor position.
	      Each next call will insert last part of older command.

       1mCtrl-G 22medit command-line content in external editor.  See "Command line
	      editing" section for details.

       1mCtrl-N 22mrecall more recent command-line from history.

       1mCtrl-P 22mrecall older command-line from history.

       1mUp	22mrecall more recent command-line from history, that begins as the
	      current command-line.

       1mDown	22mrecall  older command-line from history, that begins as the cur-
	      rent command-line.

       1mCtrl-] 22mtrigger abbreviation expansion.

1mPasting special values0m
       The shortcuts listed below insert specified values into current	cursor
       position.  Last key of every shortcut references value that it inserts:
	 - c - [c]urrent file
	 - d - [d]irectory path
	 - e - [e]xtension of a file name
	 - r - [r]oot part of a file name
	 - t - [t]ail part of directory path

	 - a - [a]utomatic filter
	 - m - [m]anual filter
	 - = - local filter, which is bound to "=" in normal mode

       Values related to filelist in current pane are available through Ctrl-X
       prefix,	while  values  from  the other pane have doubled Ctrl-X key as
       their prefix (doubled Ctrl-X is presumably easier to type  than	upper-
       case  letters; it's still easy to remap the keys to correspond to names
       of similar macros).

       1mCtrl-X c0m
	      name of the current file of the active pane.

       1mCtrl-X d0m
	      path to the current directory of the active pane.

       1mCtrl-X e0m
	      extension of the current file of the active pane.

       1mCtrl-X r0m
	      name root of current file of the active pane.

       1mCtrl-X t0m
	      the last component of path  to  the  current  directory  of  the
	      active pane.

       1mCtrl-X Ctrl-X c0m
	      name of the current file of the inactive pane.

       1mCtrl-X Ctrl-X d0m
	      path to the current directory of the inactive pane.

       1mCtrl-X Ctrl-X e0m
	      extension of the current file of the inactive pane.

       1mCtrl-X Ctrl-X r0m
	      name root of current file of the inactive pane.

       1mCtrl-X Ctrl-X t0m
	      the last component of path to the current directory of the inac-
	      tive pane.


       1mCtrl-X a0m
	      value of implicit permanent filter (old name "automatic") of the
	      active pane.

       1mCtrl-X m0m
	      value  of  explicit  permanent filter (old name "manual") of the
	      active pane.

       1mCtrl-X =0m
	      value of local filter of the active pane.


       1mCtrl-X /0m
	      last pattern from search history.

1mCommand line editing0m
       vifm provides a facility to edit several kinds of data, that is usually
       edited  in  command-line mode, in external editor (using command speci-
       fied by 'vicmd' or 'vixcmd' option).  This has at least two  advantages
       over built-in command-line mode:
	 - one can use full power of Vim to edit text;
	 - finding and reusing history entries becomes possible.

       The facility is supported by four input submodes of the command-line:
	 - command;
	 - forward search;
	 - backward search;
	 - file rename (see description of cw and cW normal mode keys).

       Editing	command-line  using external editor is activated by the Ctrl-G
       shortcut.  It's also possible to do almost the  same  from  Normal  and
       Visual modes using q:, q/ and q? commands.

       Temporary file created for the purpose of editing the line has the fol-
       lowing structure:

	 1. First line, which is either empty or contains text already entered
	    in command-line.

	 2. 2nd  and all other lines with history items starting with the most
	    recent one.  Altering this lines in any way won't  change  history
	    items stored by vifm.

       After  editing  application  is	finished the first line of the file is
       taken as the result of operation, when  the  application  returns  zero
       exit  code.  If the application returns an error (see :cquit command in
       Vim), all the edits made to the file are ignored, but the initial value
       of the first line is saved in appropriate history.

1mMore Mode0m
       This is the mode that appears when status bar content is so big that it
       doesn't fit on the screen.  One can identify the mode by "--  More  --"
       message at the bottom.

       The following keys are handled in this mode:


       1mEnter, Ctrl-J, j or Down0m
	      scroll one line down.

       1mBackspace, k or Up0m
	      scroll one line up.


       1md	22mscroll one page (half of a screen) down.

       1mu	22mscroll one page (half of a screen) up.


       1mSpace, f or PageDown0m
	      scroll down a screen.

       1mb or PageUp0m
	      scroll up a screen.


       1mG	22mscroll to the bottom.

       1mg	22mscroll to the top.


       1mq, Escape or Ctrl-C0m
	      quit the mode.

       1m:	22mswitch to command-line mode.

1mCommands0m
       Commands are executed with :command_name<Enter>

       Commented  out  lines  should  start  with the double quote symbol ("),
       which may be preceded by whitespace characters intermixed with  colons.
       Inline  comments can be added at the end of the line after double quote
       symbol, only last line of a multi-line command can  contain  such  com-
       ment.   Not  all  commands support inline comments as their syntax con-
       flicts with names of registers  and  fields  where  double  quotes  are
       allowed.

       Most of the commands have two forms: complete and the short one.  Exam-
       ple:

	 :noh[lsearch]

       This means the complete command is nohlsearch, and  the	short  one  is
       noh.

       Most of command-line commands completely reset selection in the current
       view.  However, there are several exceptions:

	 - `:invert s` most likely leaves some files selected;

	 - :normal command (when it doesn't leave command-line mode);

	 - :if and :else commands don't affect selection on successful	execu-
	   tion.

       '|' can be used to separate commands, so you can give multiple commands
       in one line.  If you want to use '|' in an argument,  precede  it  with
       '\'.

       These  commands	see  '|'  as  part  of	their arguments even when it's
       escaped:

	   :[range]!
	   :autocmd
	   :cabbrev
	   :cmap
	   :cnoreabbrev
	   :cnoremap
	   :command
	   :dmap
	   :dnoremap
	   :filetype
	   :fileviewer
	   :filextype
	   :map
	   :mmap
	   :mnoremap
	   :nmap
	   :nnoremap
	   :noremap
	   :normal
	   :qmap
	   :qnoremap
	   :vmap
	   :vnoremap
	   :wincmd
	   :windo
	   :winrun

       To be able to use another command after one of these, wrap it with  the
       :execute command.  An example:

	 if filetype('.') == 'reg' | execute '!!echo regular file' | endif

       1m:[count]0m

       1m:number0m
	      move to the file number.
	      :12 would move to the 12th file in the list.
	      :0 move to the top of the list.
	      :$ move to the bottom of the list.

       1m:[count]command0m
	      The   only  builtin  :[count]command  are  :[count]d[elete]  and
	      :[count]y[ank].

       1m:d3	22mwould delete three files starting at the current  file  position
	      moving down.

       1m:3d	22mwould delete one file at the third line in the list.

       1m:command [args]0m

       1m:[range]!program0m
	      execute command via shell.  Accepts macros.

       1m:[range]!command &0m

       same  as  above,  but the command is run in the background using vifm's
       means.

       Programs that write to stderr create error dialogs  showing  errors  of
       the command.

       Note the space before ampersand symbol, if you omit it, command will be
       run in the background using job control of your shell.

       Accepts macros.

						1m:!!0m

       1m:[range]!!command0m
	      same as :!, but pauses before returning.

       1m:!!	22mrepeat the last command.

						1m:alink0m

       1m:[range]alink[!?]0m
	      create absolute symbolic links to files in directory of inactive
	      view.   With  "?"  prompts for destination file names in an edi-
	      tor.  "!" forces overwrite.

       1m:[range]alink[!] path0m
	      create absolute symbolic links to files in  directory  specified
	      by  the  path  (absolute	or  relative  to directory of inactive
	      view).

       1m:[range]alink[!] name1 name2...0m
	      create absolute symbolic links of files in  directory  of  other
	      view  giving  each next link a corresponding name from the argu-
	      ment list.

						1m:apropos0m

       1m:apropos keyword...0m
	      create a menu of items returned by the apropos command.  Select-
	      ing  an  item  in  the  menu  opens  corresponding man page.  By
	      default the command relies on the  external  "apropos"  utility,
	      which  can  be  customized by altering value of the 'aproposprg'
	      option.  See "Menus and dialogs" section for controls.

						1m:autocmd0m

       1m:au[tocmd] {event} {pat} {cmd}0m
	      register autocommand for the {event}, which can be:
		- DirEnter - triggered after directory is changed
	      Event name is case insensitive.

	      {pat} is a comma-separated  list	of  modified  globs  patterns,
	      which can contain tilde or environment variables.  All paths use
	      slash ('/') as directory separator.  The pattern can start  with
	      a  '!',  which negates it.  Patterns that do not contain slashes
	      are matched against the last item of the path only  (e.g.  "dir"
	      in  "/path/dir").   Literal comma can be entered by doubling it.
	      Two modifications to globs matching are as follows:
		- *  - never matches a slash (i.e., can signify single	direc-
	      tory level)
		-  **  -  matches any character (i.e., can match path of arbi-
	      trary depth)

	      {cmd} is a :command or several of them separated with '|'.

	      Examples of patterns:
		- conf.d      - matches conf.d directory anywhere
		- *.d	      - matches directories ending with ".d" anywhere
		- **.git      - matches something.git, but not .git anywhere
		- **/.git/**  - matches /path/.git/objects, but not /path/.git
		-  **/.git/**/ - matches /path/.git/ only (because of trailing
	      slash)
		-  /etc/*	-  matches  /etc/conf.d/,  /etc/X11,  but  not
	      /etc/X11/fs
		- /etc/**/*.d - matches /etc/conf.d, /etc/X11/conf.d, etc.
		- /etc/**/*   - matches /etc/ itself and any file below it
		- /etc/**/**  - matches /etc/ itself and any file below it

       1m:au[tocmd] [{event}] [{pat}]0m
	      list  those autocommands that match given event-pattern combina-
	      tion.
	      {event} and {pat} can be omitted to list all  autocommands.   To
	      list  any autocommands for specific pattern one can use * place-
	      holder in place of {event}.

       1m:au[tocmd]! [{event}] [{pat}]0m
	      remove autocommands that match given event-pattern  combination.
	      Syntax is the same as for listing above.

       1m:apropos0m
	      repeat last :apropos command.

						1m:bmark0m

       1m:bmark tag1 [tag2 [tag3...]]0m
	      bookmark current directory with specified tags.

       1m:bmark! path tag1 [tag2 [tag3...]]0m
	      same  as :bmark, but allows bookmarking specific path instead of
	      current directory.  This is for use in vifmrc and for  bookmark-
	      ing files.

	      Path  can contain macros that expand to single path (%c, %C, %d,
	      %D) or those that can expand to multiple paths, but contain only
	      one  (%f, %F, %rx).  The latter is done for convenience on using
	      the command interactively.  Complex macros that  include	spaces
	      (e.g. "%c:gs/ /_") should be escaped.

						1m:bmarks0m

       1m:bmarks0m
	      display all bookmarks in a menu.

       1m:bmarks [tag1 [tag2...]]0m
	      display  menu  of  bookmarks  that  include all of the specified
	      tags.  See "Menus and dialogs" section for controls.

						1m:bmgo0m

       1m:bmgo [tag1 [tag2...]]0m
	      when there are more than one match acts  exactly	like  :bmarks,
	      otherwise  navigates  to	single match immediately (and fails if
	      there is no match).

						1m:cabbrev0m

       1m:ca[bbrev]0m
	      display menu of command-line mode abbreviations.	See "Menus and
	      dialogs" section for controls.

       1m:ca[bbrev] lhs-prefix0m
	      display  command-line  mode  abbreviations  which left-hand side
	      starts with specified prefix.

       1m:ca[bbrev] lhs rhs0m
	      register new or overwrites existing  abbreviation  for  command-
	      line  mode.   rhs  can  contain spaces and any special sequences
	      accepted in rhs of  mappings  (see  "Mappings"  section  below).
	      Abbreviations are expanded non-recursively.

						1m:cnoreabbrev0m

       1m:cnorea[bbrev]0m
	      display menu of command-line mode abbreviations.	See "Menus and
	      dialogs" section for controls.

       1m:cnorea[bbrev] lhs-prefix0m
	      display command-line mode  abbreviations	which  left-hand  side
	      starts with specified prefix.

       1m:cnorea[bbrev] lhs rhs0m
	      same  as :cabbrev, but mappings in rhs are ignored during expan-
	      sion.

						1m:cd0m

       1m:cd or :cd ~ or :cd $HOME0m
	      change to home directory.

       1m:cd -	22mgo to the last visited directory.

       1m:cd ~/dir0m
	      change directory to ~/dir.

       1m:cd /curr/dir /other/dir0m
	      change directory of the current pane to /curr/dir and  directory
	      of  the other pane to /other/dir.  Relative paths are assumed to
	      be relative to directory of current view.  Command won't fail if
	      one  of directories is invalid.  All forms of the command accept
	      macros.

       1m:cd! /dir0m
	      same as :cd /dir /dir.

						1m:cds0m

       1m:cds[!] pattern string0m
	      navigate to path obtained by substituting first match in current
	      path.   Arguments  can include slashes, but starting first argu-
	      ment with a separator will activate below form of  the  command.
	      Specifying "!"  changes directory of both panes.

       Available flags:

	 - i  -  ignore case (the 'ignorecase' and 'smartcase' options are not
	   used)

	 - I - don't ignore case (the 'ignorecase' and 'smartcase' options are
	   not used)

       1m:cds[!]/pattern/string/[flags]0m
	      same as above, but with :substitute-like syntax.	Other punctua-
	      tion characters can be used as separators.

						1m:change0m

       1m:c[hange]0m
	      show a dialog to alter properties of files.

						1m:chmod0m

       1m:[range]chmod0m
	      display file attributes (permission on *nix  and	properties  on
	      Windows) change dialog.

       1m:[range]chmod[!] arg...0m
	      only for *nix
	      change permissions for files.  See `man 1 chmod` for arg format.
	      "!" means set permissions recursively.

						1m:chown0m

       1m:[range]chown0m
	      only for *nix
	      same as co key in normal mode.

       1m:[range]chown [user][:][group]0m
	      only for *nix
	      change owner and/or group of  files.   Operates  on  directories
	      recursively.

						1m:clone0m

       1m:[range]clone[!?]0m
	      clones  files  in current directory.  With "?" vifm will open vi
	      to edit file names.  "!" forces overwrite.  Macros are expanded.

       1m:[range]clone[!] path0m
	      clones  files  to directory specified with the path (absolute or
	      relative to current directory).  "!" forces  overwrite.	Macros
	      are expanded.

       1m:[range]clone[!] name1 name2...0m
	      clones  files in current directory giving each next clone a cor-
	      responding name from the argument list.  "!"  forces  overwrite.
	      Macros are expanded.

						1m:colorscheme0m

       1m:colo[rscheme]?0m
	      print current color scheme name on the status bar.

       1m:colo[rscheme]0m
	      display  a menu with a list of available color schemes.  You can
	      choose primary color scheme here.  It is used  for  view	if  no
	      directory  specific  colorscheme	fits  current path.  It's also
	      used to set border color (except	view  titles)  and  colors  in
	      menus  and  dialogs.   See  "Menus and dialogs" section for con-
	      trols.

       1m:colo[rscheme] color_scheme_name0m
	      change primary color scheme to color_scheme_name.   In  case  of
	      errors  (e.g.  some colors are not supported by terminal) either
	      nothing is changed or color scheme is reset to builtin colors to
	      ensure that TUI is left in a usable state.

       1m:colo[rscheme] color_scheme_name directory0m
	      associate  directory with the color scheme.  The directory argu-
	      ment can be either absolute or relative path  when  :colorscheme
	      command  is  executed from command line, but mandatory should be
	      an absolute path when the command is executed in scripts	loaded
	      at startup (until vifm is completely loaded).

       1m:colo[rscheme] color_scheme_name color_scheme_name...0m
	      loads  the first color scheme in the order given that exists and
	      is supported by the terminal.   If  none	matches,  current  one
	      remains unchanged.  For example:

		"  use a separate color scheme for panes which are inside FUSE
	      mounts
		execute 'colorscheme in-fuse' &fusehome

						1m:comclear0m

       1m:comc[lear]0m
	      remove all user defined commands.

						1m:command0m

       1m:com[mand]0m
	      display a menu of user commands.	See "Menus and	dialogs"  sec-
	      tion for controls.

       1m:com[mand] prefix0m
	      display user defined commands that start with the prefix.

       1m:com[mand] name action[ &]0m
	      set or redefine a user command.
	      Use  :com[mand]!	to  overwrite  a previously set command of the
	      same name.  Builtin commands can't be redefined.
	      Unlike in vim, user commands do not have to start with a capital
	      letter.  However, command name cannot contain numbers or special
	      symbols except for single trailing '?' or '!'.
	      User commands are run in a shell by default (see below for  syn-
	      tax  of  other options).	To run a command in the background you
	      must mark it as a background command by adding "	&"  after  the
	      command's action (e.g., `:com rm rm %f &`).
	      User  commands  of  all kinds have macros expanded in them.  See
	      "Command macros" section for more information.

       1m:com[mand] name /pattern0m
	      set search pattern.

       1m:com[mand] name =pattern0m
	      set local filter value.

       1m:com[mand] name filter{:filter args}0m
	      set file name filter (see  :filter  command  description).   For
	      example:

		" display only audio files
		:command		     onlyaudio			  fil-
	      ter/.+.\(mp3|wav|mp3|flac|ogg|m4a|wma|ape\)$/i
		" display everything except audio files
		:command		     noaudio			  fil-
	      ter!/.+.\(mp3|wav|mp3|flac|ogg|m4a|wma|ape\)$/i

       1m:com[mand] name :commands0m
	      set  kind  of  an alias for internal commands (like in a shell).
	      Passes range given to alias to an aliased  command,  so  running
	      :%cp after
		:command cp :copy %a
	      equals
		:%copy

						1m:compare0m

       1m:compare  [byname  |  bysize  |  bycontents  |  listall  | listunique |0m
       1mlistdups | ofboth | ofone | groupids | grouppaths | skipempty]...0m
	      compare  files in one or two views according the arguments.  The
	      default is "bycontents listall ofboth grouppaths".  See "Compare
	      views"  section below for details.  Tree structure is incompati-
	      ble with alternative representations, so values of 'lsview'  and
	      'millerview' options are ignored.

						1m:copen0m

       1m:cope[n]0m
	      opens menu with contents of the last displayed menu with naviga-
	      tion to files by default, if any.

						1m:copy0m

       1m:[range]co[py][!?][ &]0m
	      copy files to directory of other view.   With  "?"  prompts  for
	      destination file names in an editor.  "!" forces overwrite.

       1m:[range]co[py][!] path[ &]0m
	      copy  files  to  directory  specified with the path (absolute or
	      relative to directory of other view).  "!" forces overwrite.

       1m:[range]co[py][!] name1 name2...[ &]0m
	      copy files to directory of other view giving each  next  file  a
	      corresponding  name  from  the  argument list.  "!" forces over-
	      write.

						1m:cquit0m

       1m:cq[uit][!]0m
	      same  as	:quit,	but  also  aborts   directory	choosing   via
	      --choose-dir  (empties  output  file)  and returns non-zero exit
	      code.

						1m:cunabbrev0m

       1m:cuna[bbrev] lhs0m
	      unregister command-line mode abbreviation by its lhs.

       1m:cuna[bbrev] rhs0m
	      unregister command-line mode abbreviation by its	rhs,  so  that
	      abbreviation could be removed even after expansion.

						1m:delbmarks0m

       1m:delbmarks0m
	      remove bookmarks from current directory.

       1m:delbmarks tag1 [tag2 [tag3...]]0m
	      remove  set of bookmarks that include all of the specified tags.

       1m:delbmarks!0m
	      remove all bookmarks.

       1m:delbmarks! path1 [path2 [path3...]]0m
	      remove bookmarks of listed paths.

						1m:delcommand0m

       1m:delc[ommand] user_command0m
	      remove user defined command named user_command.

						1m:delete0m

       1m:[range]d[elete][!][ &]0m
	      delete selected file  or	files.	 "!"  means  complete  removal
	      (omitting trash).

       1m:[range]d[elete][!] [reg] [count][ &]0m
	      delete selected or [count] files to the reg register.  "!" means
	      complete removal (omitting trash).

						1m:delmarks0m

       1m:delm[arks]!0m
	      delete all marks.

       1m:delm[arks] marks ...0m
	      delete specified marks, each argument is treated	as  a  set  of
	      marks.

						1m:delsession0m

       1m:delsession0m
	      delete  specified session if it was stored previously.  Deleting
	      current session doesn't detach it.

						1m:display0m

       1m:di[splay]0m
	      display menu with registers content.

       1m:di[splay] list ...0m
	      display the contents of the numbered and	named  registers  that
	      are  mentioned in list (for example "az to display "", "a and "z
	      content).

						1m:dirs0m

       1m:dirs	22mdisplay directory stack in a menu.  See "Menus and dialogs" sec-
	      tion for controls.

						1m:echo0m

       1m:ec[ho] [<expr>...]0m
	      evaluate	each  argument	as an expression and output them sepa-
	      rated with a space.  See help on :let command for  a  definition
	      of <expr>.

						1m:edit0m

       1m:[range]e[dit] [file...]0m
	      open  selected or passed file(s) in editor.  Macros and environ-
	      ment variables are expanded.

						1m:else0m

       1m:el[se]0m
	      execute commands until next matching :endif if all other	condi-
	      tions didn't match.  See also help on :if and :endif commands.

						1m:elseif0m

       1m:elsei[f] {expr1}0m
	      execute commands until next matching :elseif, :else or :endif if
	      conditions of previous :if and :elseif branches  were  evaluated
	      to zero.	See also help on :if and :endif commands.

						1m:empty0m

       1m:empty 22mpermanently	remove	files  from  all  existing  non-empty trash
	      directories (see "Trash directory" section below).  Trash direc-
	      tories  which  are  specified  via %r and/or %u also get deleted
	      completely.  Also remove all operations from undolist that  have
	      no sense after :empty and remove all records about files located
	      inside directories from all registers.  Removal is performed  as
	      background  task	with  undetermined  amount  of work and can be
	      checked via :jobs menu.

						1m:endif0m

       1m:en[dif]0m
	      end conditional block.  See also help on :if and :else commands.

						1m:execute0m

       1m:exe[cute] [<expr>...]0m
	      evaluate	each  argument as an expression and join results sepa-
	      rated by a space to get a single string which is	then  executed
	      as a command-line command.  See help on :let command for a defi-
	      nition of <expr>.

						1m:exit0m

       1m:exi[t][!]0m
	      same as :quit.

						1m:file0m

       1m:f[ile][ &]0m
	      display menu of programs set for the file type  of  the  current
	      file.   "  &"  forces  running associated program in background.
	      See "Menus and dialogs" section for controls.

       1m:f[ile] arg[ &]0m
	      run associated command that begins with the arg skipping opening
	      menu.  " &" forces running associated program in background.

						1m:filetype0m

       1m:filet[ype] pattern-list [{descr}]def_prog[ &],[{descr}]prog2[ &],...0m
	      associate  given	program list to each of the patterns.  Associ-
	      ated program (command) is used by handlers of l and  Enter  keys
	      (and  also in the :file menu).  If you need to insert comma into
	      command just double it (",,").  Space followed by  an  ampersand
	      as two last characters of a command means running of the command
	      in the background.  Optional description can be  given  to  each
	      command  to  ease  understanding	of what command will do in the
	      :file menu.  Vifm will try the rest of the programs for an asso-
	      ciation  when  the  default  isn't  found.   When  program entry
	      doesn't contain any of vifm macros,  name  of  current  file  is
	      appended as if program entry ended with %c macro on *nix and %"c
	      on Windows.  On Windows path to  executables  containing	spaces
	      can  (and  should be for correct work with such paths) be double
	      quoted.  See "Patterns" section below for pattern definition and
	      "Selection"  section  for  how  selection  is handled.  See also
	      "Automatic FUSE mounts" section below.  Example for zip archives
	      and several actions:

		filetype *.zip,*.jar,*.war,*.ear
		       \ {Mount with fuse-zip}
		       \ FUSE_MOUNT|fuse-zip %SOURCE_FILE %DESTINATION_DIR,
		       \ {View contents}
		       \ zip -sf %c | less,
		       \ {Extract here}
		       \ tar -xf %c,

	      Note  that  on  OS X when `open` is used to call an app, vifm is
	      unable to check whether that app is actually available.	So  if
	      automatic  skipping  of programs that aren't there is desirable,
	      `open` should be replaced with an actual command.

       1m:filet[ype] filename0m
	      list (in menu mode) currently  registered  patterns  that  match
	      specified file name.  Same as ":filextype filename".

						1m:filextype0m

       1m:filex[type] pattern-list [{ description }] def_program,program2,...0m
	      same as :filetype, but this command is ignored if not running in
	      X.  In X :filextype is equal to :filetype.  See "Patterns"  sec-
	      tion  below  for	pattern definition and "Selection" section for
	      how selection is handled.  See also "Automatic FUSE mounts" sec-
	      tion below.

	      For  example,  consider  the following settings (the order might
	      seem strange, but it's for the demonstration purpose):

		filetype *.html,*.htm
			\ {View in lynx}
			\ lynx
		filextype *.html,*.htm
			\ {Open with dwb}
			\ dwb %f %i &,
		filetype *.html,*.htm
			\ {View in links}
			\ links
		filextype *.html,*.htm
			\ {Open with firefox}
			\ firefox %f &,
			\ {Open with uzbl}
			\ uzbl-browser %f %i &,

	      If you're using vifm inside a terminal emulator that is  running
	      in graphical environment (when X is used on *nix; always on Win-
	      dows), vifm attempts to run application in this order:

	      1. lynx
	      2. dwb
	      3. links
	      4. firefox
	      5. uzbl

	      If there is no graphical environment  (checked  by  presence  of
	      non-empty  $DISPLAY  or $WAYLAND_DISPLAY environment variable on
	      *nix; never happens on Windows), the list will look like:

	      1. lynx
	      2. links

	      Just as if all :filextype commands were not there.

	      The purpose of such differentiation is to allow comfortable  use
	      of vifm with same settings in desktop environment/through remote
	      connection (SSH)/in native console.

	      Note that on OS X $DISPLAY isn't defined unless you  define  it,
	      so  :filextype  should  be used only if you set $DISPLAY in some
	      way.

       1m:filext[ype] filename0m
	      list (in menu mode) currently  registered  patterns  that  match
	      specified file name.  Same as ":filetype filename".

						1m:fileviewer0m

       1m:filev[iewer] pattern-list command1,command2,...0m
	      register	specified  list of commands as viewers for each of the
	      patterns.  Viewer is a command which output is captured and dis-
	      played in one of the panes of vifm after pressing "e" or running
	      :view command.  When the command doesn't	contain  any  of  vifm
	      macros,  name  of  current  file is appended as if command ended
	      with %c macro.  Comma escaping and missing  commands  processing
	      rules  as  for  :filetype apply to this command.	See "Patterns"
	      section below for pattern definition.

	      Example for zip archives:

		fileviewer *.zip,*.jar,*.war,*.ear zip -sf %c, echo "No zip to
	      preview:"

       1m:filev[iewer] filename0m
	      list  (in  menu  mode)  currently registered patterns that match
	      specified filename.

						1m:filter0m

       1m:filter[!] {pattern}0m
	      filter files matching the pattern  out  of  directory  listings.
	      '!'  controls  state  of	filter inversion after updating filter
	      value (see also 'cpoptions'  description).   Filter  is  matched
	      case sensitively on *nix and case insensitively on Windows.  See
	      "File Filters" and "Patterns" sections.

	      Example:

		" filter all files ending in .o from the filelist.
		:filter /.o$/


       1m:filter[!] {empty-pattern}0m
	      same as above, but use last search pattern as pattern value.

	      Example:

		:filter //I


       1m:filter0m
	      reset filter (set it to an empty string) and show all files.

       1m:filter!0m
	      same as :invert.

       1m:filter?0m
	      show information on local, name and auto filters.

						1m:find0m

       1m:[range]fin[d] pattern0m
	      display results of find command in  the  menu.   Searches  among
	      selected	files if any.  Accepts macros.	By default the command
	      relies on the external "find" utility, which can	be  customized
	      by altering value of the 'findprg' option.

       1m:[range]fin[d] -opt...0m
	      same  as	:find  above,  but  user  defines  all find arguments.
	      Searches among selected files if any.

       1m:[range]fin[d] path -opt...0m
	      same as :find  above,  but  user	defines  all  find  arguments.
	      Ignores selection and range.

       1m:[range]fin[d]0m
	      repeat last :find command.

						1m:finish0m

       1m:fini[sh]0m
	      stop  sourcing a script. Can only be used in a vifm script file.
	      This is a quick way to skip the rest of the file.

						1m:goto0m

       1m:go[to]0m
	      change directory if necessary and put specified path  under  the
	      cursor.	The path should be existing non-root path.  Macros and
	      environment variables are expanded.

						1m:grep0m

       1m:[range]gr[ep][!] pattern0m
	      will show results of grep command  in  the  menu.   Add  "!"  to
	      request  inversion  of  search (look for lines that do not match
	      pattern).  Searches among selected files if  any	and  no  range
	      given.  Ignores binary files by default.	By default the command
	      relies on the external "grep" utility, which can	be  customized
	      by altering value of the 'grepprg' option.

       1m:[range]gr[ep][!] -opt...0m
	      same  as :grep above, but user defines all grep arguments, which
	      are not escaped.	Searches among selected files if any.

       1m:[range]gr[ep][!]0m
	      repeat last :grep command.  "!" of this command inverts  "!"  in
	      repeated command.

						1m:help0m

       1m:h[elp]0m
	      show the help file.

       1m:h[elp] argument0m
	      is the same as using ':h argument' in vim.  Use vifm-<something>
	      to get help on vifm (tab completion works).  This  form  of  the
	      command doesn't work when 'vimhelp' option is off.

						1m:hideui0m

       1m:hideui0m
	      hide interface to show previous commands' output.

						1m:highlight0m

       1m:hi[ghlight]0m
	      display  information  about  all	highlight groups active at the
	      moment.

       1m:hi[ghlight] clear0m
	      reset all highlighting to builtin defaults and removed all file-
	      name-specific rules.

       1m:hi[ghlight] clear ( {pat1,pat2,...} | /regexp/ )0m
	      remove specified rule.

       1m:hi[ghlight] ( group-name | {pat1,pat2,...} | /regexp/ )0m
	      display  information  on given highlight group or file name pat-
	      tern of color scheme used in the active view.

       1m:hi[ghlight]  (  group-name  |   {pat1,pat2,...}   |	/regexp/[iI]   )0m
       1mcterm=style | ctermfg=color | ctermbg=color0m
	      set  style  (cterm),  foreground	(ctermfg)  or/and   background
	      (ctermbg) parameters of highlight group or file name pattern for
	      color scheme used in the active view.

       All style values as well as color names are case insensitive.

       Available style values (some of them can be combined):
	- bold
	- underline
	- reverse or inverse
	- standout
	- italic (on unsupported systems becomes reverse)
	- none

       Available group-name values:
	- Win - color of all windows (views, dialogs, menus) and default color
       for their content (e.g. regular files in views)
	- AuxWin - color of auxiliary areas of windows
	- OtherWin - color of inactive pane
	- Border - color of vertical parts of the border
	- TabLine - tab line color (for 'tabscope' set to "global")
	-  TabLineSel  - color of the tip of selected tab (regardless of 'tab-
       scope')
	- TopLine - top line color of the other pane
	- TopLineSel - top line color of the current pane
	- CmdLine - the command line/status bar color
	- ErrorMsg - color of error messages in the status bar
	- StatusLine - color of the line above the status bar
	- JobLine - color of job line that appears above the status line
	- WildMenu - color of the wild menu items
	- SuggestBox - color of key suggestion box
	- CurrLine - line at cursor position in active view
	- OtherLine - line at cursor position in inactive view
	- OddLine - color of every second entry line in a pane
	- LineNr - line number column of views
	- Selected - color of selected files
	- Directory - color of directories
	- Link - color of symbolic links in the views
	- BrokenLink - color of broken symbolic links
	- HardLink - color of regular files with more than one hard link
	- Socket - color of sockets
	- Device - color of block and character devices
	- Executable - color of executable files
	- Fifo - color of fifo pipes
	- CmpMismatch - color of mismatched files in  side-by-side  comparison
       by path
	- User1..User9 - 9 colors which can be used via %* 'statusline' macro

       Available colors:
	- -1 or default or none - default or transparent
	- black   and lightblack
	- red	  and lightred
	- green   and lightgreen
	- yellow  and lightyellow
	- blue	  and lightblue
	- magenta and lightmagenta
	- cyan	  and lightcyan
	- white   and lightwhite
	- 0-255 - corresponding colors from 256-color palette

       Light  versions	of  colors are regular colors with bold attribute set.
       So order of arguments of :highlight command is important and it's  bet-
       ter  to	put  "cterm" in front of others to prevent it from overwriting
       attributes set by "ctermfg" or "ctermbg" arguments.

       For convenience of color scheme authors xterm-like names for 256  color
       palette	  is	also   supported.    The   mapping   is   taken   from
       http://vim.wikia.com/wiki/Xterm256_color_names_for_console_Vim	Dupli-
       cated  entries were altered by adding an underscore followed by numeri-
       cal suffix.

	 0 Black		  86 Aquamarine1	   172 Orange3
	 1 Red			  87 DarkSlateGray2	   173 LightSalmon3_2
	 2 Green		  88 DarkRed_2		   174 LightPink3
	 3 Yellow		  89 DeepPink4_2	   175 Pink3
	 4 Blue 		  90 DarkMagenta	   176 Plum3
	 5 Magenta		  91 DarkMagenta_2	   177 Violet
	 6 Cyan 		  92 DarkViolet 	   178 Gold3_2
	 7 White		  93 Purple		   179 LightGoldenrod3
	 8 LightBlack		  94 Orange4_2		   180 Tan
	 9 LightRed		  95 LightPink4 	   181 MistyRose3
	10 LightGreen		  96 Plum4		   182 Thistle3
	11 LightYellow		  97 MediumPurple3	   183 Plum2
	12 LightBlue		  98 MediumPurple3_2	   184 Yellow3_2
	13 LightMagenta 	  99 SlateBlue1 	   185 Khaki3
	14 LightCyan		 100 Yellow4		   186 LightGoldenrod2
	15 LightWhite		 101 Wheat4		   187 LightYellow3
	16 Grey0		 102 Grey53		   188 Grey84
	17 NavyBlue		 103 LightSlateGrey	   189 LightSteelBlue1
	18 DarkBlue		 104 MediumPurple	   190 Yellow2
	19 Blue3		 105 LightSlateBlue	   191 DarkOliveGreen1
	20 Blue3_2		  106  Yellow4_2	      192  DarkOliveG-
       reen1_2
	21 Blue1		 107 DarkOliveGreen3	   193 DarkSeaGreen1_2
	22 DarkGreen		 108 DarkSeaGreen	   194 Honeydew2
	23 DeepSkyBlue4 	 109 LightSkyBlue3	   195 LightCyan1
	24 DeepSkyBlue4_2	 110 LightSkyBlue3_2	   196 Red1
	25 DeepSkyBlue4_3	 111 SkyBlue2		   197 DeepPink2
	26 DodgerBlue3		 112 Chartreuse2_2	   198 DeepPink1
	27 DodgerBlue2		 113 DarkOliveGreen3_2	   199 DeepPink1_2
	28 Green4		 114 PaleGreen3_2	   200 Magenta2_2
	29 SpringGreen4 	 115 DarkSeaGreen3	   201 Magenta1
	30 Turquoise4		 116 DarkSlateGray3	   202 OrangeRed1
	31 DeepSkyBlue3 	 117 SkyBlue1		   203 IndianRed1
	32 DeepSkyBlue3_2	 118 Chartreuse1	   204 IndianRed1_2
	33 DodgerBlue1		 119 LightGreen_2	   205 HotPink
	34 Green3		 120 LightGreen_3	   206 HotPink_2
	35 SpringGreen3 	 121 PaleGreen1 	   207 MediumOrchid1_2
	36 DarkCyan		 122 Aquamarine1_2	   208 DarkOrange
	37 LightSeaGreen	 123 DarkSlateGray1	   209 Salmon1
	38 DeepSkyBlue2 	 124 Red3		   210 LightCoral
	39 DeepSkyBlue1 	 125 DeepPink4_3	   211 PaleVioletRed1
	40 Green3_2		 126 MediumVioletRed	   212 Orchid2
	41 SpringGreen3_2	 127 Magenta3		   213 Orchid1
	42 SpringGreen2 	 128 DarkViolet_2	   214 Orange1
	43 Cyan3		 129 Purple_2		   215 SandyBrown
	44 DarkTurquoise	 130 DarkOrange3	   216 LightSalmon1
	45 Turquoise2		 131 IndianRed		   217 LightPink1
	46 Green1		 132 HotPink3		   218 Pink1
	47 SpringGreen2_2	 133 MediumOrchid3	   219 Plum1
	48 SpringGreen1 	 134 MediumOrchid	   220 Gold1
	49  MediumSpringGreen	   135	MediumPurple2	      221 LightGolden-
       rod2_2
	50 Cyan2		 136  DarkGoldenrod	     222  LightGolden-
       rod2_3
	51 Cyan1		 137 LightSalmon3	   223 NavajoWhite1
	52 DarkRed		 138 RosyBrown		   224 MistyRose1
	53 DeepPink4		 139 Grey63		   225 Thistle1
	54 Purple4		 140 MediumPurple2_2	   226 Yellow1
	55 Purple4_2		 141 MediumPurple1	   227 LightGoldenrod1
	56 Purple3		 142 Gold3		   228 Khaki1
	57 BlueViolet		 143 DarkKhaki		   229 Wheat1
	58 Orange4		 144 NavajoWhite3	   230 Cornsilk1
	59 Grey37		 145 Grey69		   231 Grey100
	60 MediumPurple4	 146 LightSteelBlue3	   232 Grey3
	61 SlateBlue3		 147 LightSteelBlue	   233 Grey7
	62 SlateBlue3_2 	 148 Yellow3		   234 Grey11
	63 RoyalBlue1		 149 DarkOliveGreen3_3	   235 Grey15
	64 Chartreuse4		 150 DarkSeaGreen3_2	   236 Grey19
	65 DarkSeaGreen4	 151 DarkSeaGreen2	   237 Grey23
	66 PaleTurquoise4	 152 LightCyan3 	   238 Grey27
	67 SteelBlue		 153 LightSkyBlue1	   239 Grey30
	68 SteelBlue3		 154 GreenYellow	   240 Grey35
	69 CornflowerBlue	 155 DarkOliveGreen2	   241 Grey39
	70 Chartreuse3		 156 PaleGreen1_2	   242 Grey42
	71 DarkSeaGreen4_2	 157 DarkSeaGreen2_2	   243 Grey46
	72 CadetBlue		 158 DarkSeaGreen1	   244 Grey50
	73 CadetBlue_2		 159 PaleTurquoise1	   245 Grey54
	74 SkyBlue3		 160 Red3_2		   246 Grey58
	75 SteelBlue1		 161 DeepPink3		   247 Grey62
	76 Chartreuse3_2	 162 DeepPink3_2	   248 Grey66
	77 PaleGreen3		 163 Magenta3_2 	   249 Grey70
	78 SeaGreen3		 164 Magenta3_3 	   250 Grey74
	79 Aquamarine3		 165 Magenta2		   251 Grey78
	80 MediumTurquoise	 166 DarkOrange3_2	   252 Grey82
	81 SteelBlue1_2 	 167 IndianRed_2	   253 Grey85
	82 Chartreuse2		 168 HotPink3_2 	   254 Grey89
	83 SeaGreen2		 169 HotPink2		   255 Grey93
	84 SeaGreen1		 170 Orchid
	85 SeaGreen1_2		 171 MediumOrchid1

       There are two colors (foreground and  background)  and  only  one  bold
       attribute.   Thus  single  bold	attribute  affects  both  colors  when
       "reverse" attribute is used in vifm run inside terminal	emulator.   At
       the  same  time	linux native console can handle boldness of foreground
       and background colors independently, but for consistency with  terminal
       emulators  this is available only implicitly by using light versions of
       colors.	This behaviour might be changed in the future.

       Although vifm supports 256 colors in a sense they are supported	by  UI
       drawing	library,  whether  you	will be able to use all of them highly
       depends on your terminal.  To set up terminal properly, make sure  that
       $TERM  in the environment you run vifm is set to name of 256-color ter-
       minal  (on  *nixes  it  can  also  be  set  via	X   resources),   e.g.
       xterm-256color.	One can find list of available terminal names by list-
       ing /usr/lib/terminfo/.	Number of colors supported  by	terminal  with
       current settings can be checked via "tput colors" command.

       Here  is  the hierarchy of highlight groups, which you need to know for
       using transparency:
	 JobLine
	 SuggestBox
	 StatusLine
	   WildMenu
	   User1..User9
	 Border
	 CmdLine
	   ErrorMsg
	 Win
	   OtherWin
	     AuxWin
	       OddLine
		 File name specific highlights
		   Directory
		   Link
		   BrokenLink
		   HardLink
		   Socket
		   Device
		   Fifo
		   Executable
		     Selected
		       CurrLine
			 LineNr (in active pane)
		       OtherLine
			 LineNr (in inactive pane)
	 TopLine
	   TopLineSel
	     TabLineSel (for pane tabs)
	       User1..User9
	 TabLine
	   TabLineSel
	     User1..User9

       "none" means default terminal color for highlight groups at  the  first
       level of the hierarchy and transparency for all others.

       Here file name specific highlights mean those configured via globs ({})
       or regular expressions (//).  At most one of them is applied  per  file
       entry,  namely  the first that matches file name, hence order of :high-
       light commands might be important in certain cases.

						1m:history0m

       1m:his[tory]0m
	      display a menu with list of visited directories.	See "Menus and
	      dialogs" section for controls.

       1m:his[tory] x0m
	      x can be:
		d[ir]	  or . show directory history.
		c[md]	  or : show command line history.
		s[earch]   or  /  show	search history and search forward on l
	      key.
		f[search] or / show search history and	search	forward  on  l
	      key.
		b[search]  or  ?  show search history and search backward on l
	      key.
		i[nput]   or @ show prompt history (e.g. on  one  file	renam-
	      ing).
		fi[lter]  or = show filter history (see description of the "="
	      normal mode command).
	      See "Menus and dialogs" section for controls.

						1m:histnext0m

       1m:histnext0m
	      same as <c-i>.  The main use case for this command  is  to  work
	      around  the  common pain point of <tab> and <c-i> being the same
	      ASCII character: one could alter the terminal emulator  settings
	      to  emit,  for example, the `F1` keycode when Ctrl-I is pressed,
	      then `:noremap <f1> :histnext<cr>` in vifm, add "t" flag to  the
	      'cpoptions',  and  thus  have  both  <c-i>  and <tab> working as
	      expected.

						1m:histprev0m

       1m:histprev0m
	      same as <c-o>.

						1m:if0m

       1m:if {expr1}0m
	      start conditional  block.   Commands  are  executed  until  next
	      matching	:elseif,  :else or :endif command if {expr1} evaluates
	      to non-zero, otherwise they are ignored.	See also help on :else
	      and :endif commands.

	      Example:

		if $TERM == 'screen.linux'
		    highlight CurrLine ctermfg=lightwhite ctermbg=lightblack
		elseif $TERM == 'tmux'
		    highlight	  CurrLine     cterm=reverse	 ctermfg=black
	      ctermbg=white
		else
		    highlight	CurrLine   cterm=bold,reverse	 ctermfg=black
	      ctermbg=white
		endif

						1m:invert0m

       1m:invert [f]0m
	      invert file name filter.

       1m:invert? [f]0m
	      show current filter state.

       1m:invert s0m
	      invert selection.

       1m:invert o0m
	      invert sorting order of the primary sorting key.

       1m:invert? o0m
	      show sorting order of the primary sorting key.

						1m:jobs0m

       1m:jobs	22mdisplay  menu of current backgrounded processes.  See "Menus and
	      dialogs" section for controls.

						1m:let0m

       1m:let $ENV_VAR = <expr>0m
	      set an environment variable.  Warning: setting environment vari-
	      able to an empty string on Windows removes it.

       1m:let $ENV_VAR .= <expr>0m
	      append value to environment variable.

       1m:let &[l:|g:]opt = <expr>0m
	      sets option value.

       1m:let &[l:|g:]opt .= <expr>0m
	      append value to string option.

       1m:let &[l:|g:]opt += <expr>0m
	      increasing option value, adding sub-values.

       1m:let &[l:|g:]opt -= <expr>0m
	      decreasing option value, removing sub-values.

       Where  <expr> could be a single-quoted string, double-quoted string, an
       environment variable, function call or a concatanation of any  of  them
       in any order using the '.' operator.  Any whitespace is ignored.

						1m:locate0m

       1m:locate filename0m
	      use "locate" command to create a menu of filenames.  Selecting a
	      file from the menu will reload the current file list in vifm  to
	      show  the  selected  file.  By default the command relies on the
	      external "locate" utility (it's assumed  that  its  database  is
	      already built), which can be customized by altering value of the
	      'locateprg' option.  See "Menus and dialogs"  section  for  con-
	      trols.

       1m:locate0m
	      repeat last :locate command.

						1m:ls0m

       1m:ls	22mlists windows of active terminal multiplexer (only when terminal
	      multiplexer is used).  This is achieved by issuing  proper  com-
	      mand  for active terminal multiplexer, thus the list is not han-
	      dled by vifm.

						1m:lstrash0m

       1m:lstrash0m
	      display a menu with list of files in trash.  Each element of the
	      list  is original path of a deleted file, thus the list can con-
	      tain duplicates.	See "Menus and dialogs" section for  controls.

						1m:mark0m

       1m:[range]ma[rk][?] x [/full/path] [filename]0m
	      Set  mark  x (a-zA-Z0-9) at /full/path and filename.  By default
	      current directory is being used.	If no filename was  given  and
	      /full/path  is  current  directory  then last file in [range] is
	      used.  Using of macros is allowed.  Question mark will stop com-
	      mand from overwriting existing marks.

						1m:marks0m

       1m:marks 22mcreate  a pop-up menu of marks.  See "Menus and dialogs" section
	      for controls.

       1m:marks list ...0m
	      display the contents of the marks that are mentioned in list.

						1m:media0m

       1m:media 22monly for *nix
	      display media management menu.  See "Menus and dialogs"  section
	      for controls.  See also 'mediaprg' option.

						1m:messages0m

       1m:mes[sages]0m
	      shows previously given messages (up to 50).

						1m:mkdir0m

       1m:[line]mkdir[!] dir ...0m
	      create  directories  at specified paths.	The [line] can be used
	      to pick node in a tree-view.  "!" means make parent  directories
	      as needed.  Macros are expanded.

						1m:move0m

       1m:[range]m[ove][!?][ &]0m
	      move  files  to  directory  of other view.  With "?" prompts for
	      destination file names in an editor.  "!" forces overwrite.

       1m:[range]m[ove][!] path[ &]0m
	      move files to directory specified with  the  path  (absolute  or
	      relative to directory of other view).  "!" forces overwrite.

       1m:[range]m[ove][!] name1 name2...[ &]0m
	      move  files  to  directory of other view giving each next file a
	      corresponding name from the argument  list.   "!"  forces  over-
	      write.

						1m:nohlsearch0m

       1m:noh[lsearch]0m
	      clear selection in current pane.

						1m:normal0m

       1m:norm[al][!] commands0m
	      execute normal mode commands.  If "!" is used, user defined map-
	      pings are ignored.  Unfinished last command  is  aborted	as  if
	      <esc>  or  <c-c>	was typed.  A ":" should be completed as well.
	      Commands can't start with a space, so put a  count  of  1  (one)
	      before it.

						1m:only0m

       1m:on[ly]0m
	      switch to a one window view.

						1m:popd0m

       1m:popd	22mremove pane directories from stack.

						1m:pushd0m

       1m:pushd[!] /curr/dir [/other/dir]0m
	      add  pane  directories  to  stack and process arguments like :cd
	      command.

       1m:pushd 22mexchange the top two items of the directory stack.

						1m:put0m

       1m:[line]pu[t][!] [reg] [ &]0m
	      puts files from specified register (" by default)  into  current
	      directory.   The [line] can be used to pick node in a tree-view.
	      "!" moves files "!" moves files  from  their  original  location
	      instead  of copying them.  During this operation no confirmation
	      dialogs will be shown, all checks are performed beforehand.

						1m:pwd0m

       1m:pw[d] 22mshow the present working directory.

						1m:qall0m

       1m:qa[ll][!]0m
	      exit vifm (add ! to skip saving changes and checking for	active
	      backgrounded commands).

						1m:quit0m

       1m:q[uit][!]0m
	      if  there is more than one tab, close the current one, otherwise
	      exit vifm (add ! to skip saving state and  checking  for	active
	      backgrounded commands).

						1m:redraw0m

       1m:redr[aw]0m
	      redraw the screen immediately.

						1m:registers0m

       1m:reg[isters]0m
	      display menu with registers content.

       1m:reg[isters] list ...0m
	      display  the  contents  of the numbered and named registers that
	      are mentioned in list (for example "az to display "", "a and  "z
	      content).

						1m:regular0m

       1m:regular0m

       switch to regular view leaving custom view.
						       1m:rename0m

       1m:[range]rename[!]0m
	      rename  files  using  vi	to  edit names. ! means go recursively
	      through directories.

       1m:[range]rename name1 name2...0m
	      rename each of selected files to a corresponding name.

						1m:restart0m

       1m:restart0m
	      free  a  lot  of	things	(histories,  commands,	etc.),	reread
	      vifminfo,  vifmrc  and  session  files  and run startup commands
	      passed in the argument list, thus  losing  all  unsaved  changes
	      (e.g.   recent  history  or  keys  mapped  after	starting  this
	      instance).  Session that wasn't yet stored gets reset.

	      While many things get reset, some basic  UI  state  and  current
	      locations are preserved, including tabs.

       1m:restart full0m
	      variation  of  :restart  that  makes no attempt to preserve any-
	      thing.

						1m:restore0m

       1m:[range]restore0m
	      restore file from trash directory, doesn't work outside  one  of
	      trash directories.  See "Trash directory" section below.

						1m:rlink0m

       1m:[range]rlink[!?]0m
	      create  relative	symbolic  links to files in directory of other
	      view.  With "?" prompts for destination file names in an editor.
	      "!" forces overwrite.

       1m:[range]rlink[!] path0m
	      create  relative	symbolic links of files in directory specified
	      with the path (absolute or relative to directory of other view).
	      "!" forces overwrite.

       1m:[range]rlink[!] name1 name2...0m
	      create  relative	symbolic  links of files in directory of other
	      view giving each next link a corresponding name from  the  argu-
	      ment list.  "!" forces overwrite.

						1m:screen0m

       1m:screen0m
	      toggle whether to use the terminal multiplexer or not.
	      A  terminal  multiplexer uses pseudo terminals to allow multiple
	      windows to be used in the console or in a single xterm.	Start-
	      ing  vifm  from  terminal  multiplexer  with appropriate support
	      turned on will cause vifm to open  a  new  terminal  multiplexer
	      window for each new file edited or program launched from vifm.
	      This  requires  screen  version 3.9.9 or newer for the screen -X
	      argument or tmux (1.8 version or newer is recommended).

       1m:screen!0m
	      enable integration with terminal multiplexers.

       1m:screen?0m
	      display  whether	integration  with  terminal  multiplexers   is
	      enabled.

       Note:  the  command  is called screen for historical reasons (when tmux
       wasn't yet supported) and might be changed in future releases,  or  get
       an alias.

						1m:select0m

       1m:[range]select0m
	      select  files  in  the  given range (current file if no range is
	      given).

       1m:select {pattern}0m
	      select files that match specified pattern.   Possible  {pattern}
	      forms are described in "Patterns" section below.	Trailing slash
	      for directories is taken into account, so `:select! */ |	invert
	      s` selects only files.

       1m:select //[iI]0m
	      same as item above, but reuses last search pattern.

       1m:select !{external command}0m
	      select  files from the list supplied by external command.  Files
	      are matched by full paths, relative paths are converted to abso-
	      lute ones beforehand.

       1m:[range]select! [{pattern}]0m
	      same  as above, but resets previously selected items before pro-
	      ceeding.

						1m:session0m

       1m:session?0m
	      print name of the current session.

       1m:session0m
	      detach current session without saving it.  Resets v:session.

       1m:session name0m
	      create or load and switch to a session with the specified  name.
	      Name  can't  contain  slashes.   Session active at the moment is
	      saved before the switch.	Session is  also  automatically  saved
	      when quiting the application in usual ways.  Sets v:session.

						1m:set0m

       1m:se[t] 22mdisplay all options that differ from their default value.

       1m:se[t] all0m
	      display all options.

       1m:se[t] opt1=val1 opt2='val2' opt3="val3" ...0m
	      sets given options.  For local options both values are set.
	      You can use following syntax:
	       - for all options - option, option? and option&
	       - for boolean options - nooption, invoption and option!
	       - for integer options - option=x, option+=x and option-=x
	       - for string options - option=x and option+=x
	       -  for string list options - option=x, option+=x, option-=x and
	      option^=x
	       - for enumeration options - option=x, option+=x and option-=x
	       -  for  set  options  -	option=x,  option+=x,  option-=x   and
	      option^=x
	       -  for  charset	options  -  option=x, option+=x, option-=x and
	      option^=x

	      the meaning:
	       - option - turn option on (for boolean) or print its value (for
	      all others)
	       - nooption - turn option off
	       - invoption - invert option state
	       - option! - invert option state
	       - option? - print option value
	       - option& - reset option to its default value
	       - option=x or option:x - set option to x
	       - option+=x - add/append x to option
	       - option-=x - remove (or subtract) x from option
	       - option^=x - toggle x presence among values of the option

	      Option  name  can  be  prepended	and  appended by any number of
	      whitespace characters.

						1m:setglobal0m

       1m:setg[lobal]0m
	      display all global options that differ from their default value.

       1m:setg[lobal] all0m
	      display all global options.

       1m:setg[lobal] opt1=val1 opt2='val2' opt3="val3" ...0m
	      same  as	:set, but changes/prints only global options or global
	      values of local options.	Changes to the	latter	might  be  not
	      visible until directory is changed.

						1m:setlocal0m

       1m:setl[ocal]0m
	      display  all local options that differ from their default value.

       1m:setl[ocal] all0m
	      display all local options.

       1m:setl[ocal] opt1=val1 opt2='val2' opt3="val3" ...0m
	      same as :set, but changes/prints	only  local  values  of  local
	      options.

						1m:shell0m

       1m:sh[ell][!]0m
	      start  a	shell  in  current directory.  "!" suppresses spawning
	      dedicated window of terminal multiplexer for a shell.   To  make
	      vifm  adaptive  to  environment  it uses $SHELL if it's defined,
	      otherwise 'shell' value is used.


						1m:siblnext0m

       1m:[count]siblnext[!]0m

	      change directory to [count]th next sibling directory after  cur-
	      rent  path  using  value	of global sort option of current pane.
	      "!" enables wrapping.

	      For example, say, you're at /boot and root listing  starts  like
	      this:

		  bin/
		  boot/
		  dev/
		  ...

	      Issuing :siblnext will navigate to /dev.


						1m:siblprev0m

       1m:[count]siblprev[!]0m
	      same as :siblnext, but in the opposite direction.

						1m:sort0m

       1m:sor[t]0m
	      display  dialog  with  different	sorting methods, where one can
	      select the primary sorting key.  When 'viewcolumns'  options  is
	      empty  and  'lsview'  is	off, changing primary sorting key will
	      also affect view look (in particular the second  column  of  the
	      view will be changed).  See "Menus and dialogs" section for con-
	      trols.

						1m:source0m

       1m:so[urce] file0m
	      read command-line commands from the file.

						1m:split0m

       1m:sp[lit]0m
	      switch to a two window horizontal view.

       1m:sp[lit]!0m
	      toggle horizontal window splitting.

       1m:sp[lit] path0m
	      splits the window horizontally to show  both  file  directories.
	      Also changes other pane to path (absolute or relative to current
	      directory of active pane).

						1m:substitute0m

       1m:[range]s[ubstitute]/pattern/string/[flags]0m
	      for each file in range replace a match of pattern with string.

       String can contain \0...\9 to link to capture groups (\0 -  all	match,
       \1 - first group, etc.).

       Pattern is stored in search history.

       Available flags:

	 - i  -  ignore case (the 'ignorecase' and 'smartcase' options are not
	   used)

	 - I - don't ignore case (the 'ignorecase' and 'smartcase' options are
	   not used)

	 - g - substitute all matches in each file name (each g toggles this)

       1m:[range]s[ubstitute]/pattern0m
	      substitute pattern with an empty string.

       1m:[range]s[ubstitute]//string/[flags]0m
	      use last pattern from search history.

       1m:[range]s[ubstitute]0m
	      repeat previous substitution command.

						1m:sync0m

       1m:sync [relative path]0m
	      change  the  other pane to the current pane directory or to some
	      path  relative  to  the  current	directory.   Using  macros  is
	      allowed.

       1m:sync! 22mchange the other pane to the current pane directory and synchro-
	      nize cursor position.  If current pane displays custom  list  of
	      files,  position	before	entering it is used (current one might
	      not make any sense).


       1m:sync! [location | cursorpos | localopts | filters | filelist | tree  |0m
       1mall]...0m
	      change enumerated properties of the other pane to  match	corre-
	      sponding	properties  of	the  current pane.  Arguments have the
	      following meanings:

		- location - current directory of the pane;

		- cursorpos - cursor  position	(doesn't  make	sense  without
		  "location");

		- localopts - all local options;

		- filters - all filters;

		- filelist  -  list  of  files for custom view (implies "loca-
		  tion");

		- tree - tree structure for tree view (implies "location");

		- all - all of the above.

						1m:tabclose0m

       1m:tabc[lose]0m
	      close current tab, unless it's the  only	one  open  at  current
	      scope.

						1m:tabmove0m

       1m:tabm[ove] [N]0m
	      without  the  argument  or with `$` as the argument, current tab
	      becomes the last tab.  With the argument, current tab  is  moved
	      after  the tab with the specified number.  Argument of `0` moves
	      current tab to the first position.

						1m:tabname0m

       1m:tabname [name]0m
	      set, update or reset (when no argument is provided) name of  the
	      current tab.

						1m:tabnew0m

       1m:tabnew [path]0m
	      create  new tab.	Accepts optional path for the new tab.	Macros
	      and environment variables are expanded.

						1m:tabnext0m

       1m:tabn[ext]0m
	      switch to the next tab (wrapping around).

       1m:tabn[ext] {n}0m
	      go to the tab number {n}.  Tab numeration starts with 1.

						1m:tabonly0m

       1m:tabo[nly]0m
	      close all tabs but the current one.  Closes pane	tabs  only  at
	      the active side.

						1m:tabprevious0m

       1m:tabp[revious]0m
	      switch to the previous tab (wrapping around).

       1m:tabp[revious] {n}0m
	      go  to  the {n}-th previous tab.	Note that :tabnext handles its
	      argument differently.

						1m:touch0m

       1m:[line]touch file...0m
	      create files at specified paths.	 Aborts  on  errors.   Doesn't
	      update  time  of existing files.	The [line] can be used to pick
	      node in a tree-view.  Macros are expanded.

						1m:tr0m

       1m:[range]tr/pattern/string/0m
	      for each file in range transliterate the characters which appear
	      in  pattern  to  the  corresponding  character  in string.  When
	      string is shorter than pattern, it's padded with its last  char-
	      acter.

						1m:trashes0m

       1m:trashes0m
	      lists all valid trash directories in a menu.  Only non-empty and
	      writable trash directories are shown.  This is exactly the  list
	      of directories that are cleared when :empty command is executed.

       1m:trashes?0m
	      same as :trashes, but also displays size of  each  trash	direc-
	      tory.

						1m:tree0m

       1m:tree	22mturn  pane  into  tree  view with current directory as its root.
	      The tree view is implemented on top of a	custom	view,  but  is
	      automatically  kept in sync with file system state and considers
	      all the filters.	Thus the structure  corresponds  to  what  one
	      would  see  on  visiting the directories manually.  As a special
	      case for trees built out of  custom  view  file-system  tracking
	      isn't performed.

	      To leave tree view go up from its root or use gh at any level of
	      the tree.  Any command that changes directory will also  do,  in
	      particular, `:cd ..`.

	      Tree structure is incompatible with alternative representations,
	      so values of 'lsview' and 'millerview' options are ignored.

       1m:tree! 22mtoggle current view in and out of tree mode.

						1m:undolist0m

       1m:undol[ist]0m
	      display list of latest changes.  Use "!" to see actual commands.
	      See "Menus and dialogs" section for controls.

						1m:unlet0m

       1m:unl[et][!] $ENV_VAR1 $ENV_VAR2 ...0m
	      remove  environment variables. Add ! to omit displaying of warn-
	      ings about nonexistent variables.

						1m:unselect0m

       1m:[range]unselect0m
	      unselect files in the given range (current file if no  range  is
	      given).

       1m:unselect {pattern}0m
	      unselect files that match specified pattern.  Possible {pattern}
	      forms are described in "Patterns" section below.	Trailing slash
	      for  directories	is taken into account, so `:unselect */` unse-
	      lects directories.

       1m:unselect !{external command}0m
	      unselect files from  the	list  supplied	by  external  command.
	      Files are matched by full paths, relative paths are converted to
	      absolute ones beforehand.

       1m:unselect //[iI]0m
	      same as item above, but reuses last search pattern.

						1m:version0m

       1m:ve[rsion]0m
	      show menu with version information.

						1m:vifm0m

       1m:vifm	22msame as :version.

						1m:view0m

       1m:vie[w]0m
	      toggle on and off the quick file view (preview  of  file's  con-
	      tents).  See also 'quickview' option.

       1m:vie[w]!0m
	      turn on quick file view if it's off.

						1m:volumes0m

       1m:volumes0m
	      only for MS-Windows
	      display  menu  with volume list.	Hitting l (or Enter) key opens
	      appropriate volume in the current pane.  See "Menus and dialogs"
	      section for controls.

						1m:vsplit0m

       1m:vs[plit]0m
	      switch to a two window vertical view.

       1m:vs[plit]!0m
	      toggle window vertical splitting.

       1m:vs[plit] path0m
	      split  the window vertically to show both file directories.  And
	      changes other pane to path  (absolute  or  relative  to  current
	      directory of active pane).

						1m:wincmd0m

       1m:[count]winc[md] {arg}0m
	      same as running Ctrl-W [count] {arg}.

						1m:windo0m

       1m:windo [command...]0m
	      execute command for each pane (same as :winrun % command).

						1m:winrun0m

       1m:winrun type [command...]0m
	      execute  command	for pane(s), which is determined by type argu-
	      ment:
		- ^ - top-left pane
		- $ - bottom-right pane
		- % - all panes
		- . - current pane
		- , - other pane

						1m:write0m

       1m:w[rite]0m
	      write current state to vifminfo and session files (if a  session
	      is active).

						1m:wq0m

       1m:wq[!] 22msame  as  :quit,  but  ! disables only the check of backgrounded
	      commands, while state of the application is  always  written.
	      1m:wqall0m

       1m:wqa[ll][!]0m
	      same  as	:qall,	but  ! disables only the check of backgrounded
	      commands, while state of the application is always written.

						1m:xall0m

       1m:xa[ll][!]0m
	      same as :qall.

						1m:xit0m

       1m:x[it][!]0m
	      same as :quit.

						1m:yank0m

       1m:[range]y[ank] [reg] [count]0m
	      will yank files to the reg register.

						1m:map lhs rhs0m

       1m:map lhs rhs0m
	      map lhs key sequence to rhs in normal and visual modes.

       1m:map! lhs rhs0m
	      map lhs key sequence to rhs in command line mode.


					      1m:cmap :dmap  :mmap  :nmap  :qmap0m
       1m:vmap0m

       1m:cm[ap] lhs rhs0m
	      map lhs to rhs in command line mode.

       1m:dm[ap] lhs rhs0m
	      map lhs to rhs in dialog modes.

       1m:mm[ap] lhs rhs0m
	      map lhs to rhs in menu mode.

       1m:nm[ap] lhs rhs0m
	      map lhs to rhs in normal mode.

       1m:qm[ap] lhs rhs0m
	      map lhs to rhs in view mode.

       1m:vm[ap] lhs rhs0m
	      map lhs to rhs in visual mode.


						1m:*map0m

       1m:cm[ap]0m
	      list all maps in command line mode.

       1m:dm[ap]0m
	      list all maps in dialog modes.

       1m:mm[ap]0m
	      list all maps in menu mode.

       1m:nm[ap]0m
	      list all maps in normal mode.

       1m:qm[ap]0m
	      list all maps in view mode.

       1m:vm[ap]0m
	      list all maps in visual mode.

						1m:*map beginning0m

       1m:cm[ap] beginning0m
	      list all maps in command line mode that start  with  the	begin-
	      ning.

       1m:dm[ap] beginning0m
	      list all maps in dialog modes that start with the beginning.

       1m:mm[ap] beginning0m
	      list all maps in menu mode that start with the beginning.

       1m:nm[ap] beginning0m
	      list all maps in normal mode that start with the beginning.

       1m:qm[ap] beginning0m
	      list all maps in view mode that start with the beginning.

       1m:vm[ap] beginning0m
	      list all maps in visual mode that start with the beginning.

						1m:noremap0m

       1m:no[remap] lhs rhs0m
	      map the key sequence lhs to rhs for normal and visual modes, but
	      disallow mapping of rhs.

       1m:no[remap]! lhs rhs0m
	      map the key sequence lhs to rhs for command line mode, but  dis-
	      allow mapping of rhs.

			1m:cnoremap   :dnoremap  :mnoremap  :nnoremap  :qnoremap0m
       1m:vnoremap0m

       1m:cno[remap] lhs rhs0m
	      map  the key sequence lhs to rhs for command line mode, but dis-
	      allow mapping of rhs.

       1m:dn[oremap] lhs rhs0m
	      map the key sequence lhs to rhs for dialog modes,  but  disallow
	      mapping of rhs.

       1m:mn[oremap] lhs rhs0m
	      map the key sequence lhs to rhs for menu mode, but disallow map-
	      ping of rhs.

       1m:nn[oremap] lhs rhs0m
	      map the key sequence lhs to rhs for normal  mode,  but  disallow
	      mapping of rhs.

       1m:qn[oremap] lhs rhs0m
	      map the key sequence lhs to rhs for view mode, but disallow map-
	      ping of rhs.

       1m:vn[oremap] lhs rhs0m
	      map the key sequence lhs to rhs for visual  mode,  but  disallow
	      mapping of rhs.

						1m:unmap0m

       1m:unm[ap] lhs0m
	      remove user mapping of lhs from normal and visual modes.

       1m:unm[ap]! lhs0m
	      remove user mapping of lhs from command line mode.

				   1m:cunmap  :dunmap  :munmap	:nunmap  :qunmap0m
       1m:vunmap0m

       1m:cu[nmap] lhs0m
	      remove user mapping of lhs from command line mode.

       1m:du[nmap] lhs0m
	      remove user mapping of lhs from dialog modes.

       1m:mu[nmap] lhs0m
	      remove user mapping of lhs from menu mode.

       1m:nun[map] lhs0m
	      remove user mapping of lhs from normal mode.

       1m:qun[map] lhs0m
	      remove user mapping of lhs from view mode.

       1m:vu[nmap] lhs0m
	      remove user mapping of lhs from visual mode.

1mRanges0m
       The ranges implemented include:
	 2,3 - from second to third file in the list (including it)
	 % - the entire directory.
	 . - the current position in the filelist.
	 $ - the end of the filelist.
	 't - the mark position t.

       Examples:

	 :%delete

       would delete all files in the directory.

	 :2,4delete

       would delete the files in the list positions 2 through 4.

	 :.,$delete

       would  delete  the  files  from	the current position to the end of the
       filelist.

	 :3delete4

       would delete the files in the list positions 3, 4, 5, 6.

       If a backward range is given :4,2delete - an query message is given and
       user can chose what to do next.

       The builtin commands that accept a range are :d[elete] and :y[ank].

1mCommand macros0m
       The command macros may be used in user commands.

       1m%a	22mUser  arguments.   When  user arguments contain macros, they are
	      expanded before preforming substitution of %a.

       1m%c %"c 22mThe current file under the cursor.

       1m%C %"C 22mThe current file under the cursor in the other directory.

       1m%f %"f 22mAll of the selected files, but see "Selection" section below.

       1m%F %"F 22mAll of the selected files in the other directory list,  but	see
	      "Selection" section below.

       1m%b %"b 22mSame as %f %F.

       1m%d %"d 22mFull path to current directory.

       1m%D %"D 22mFull path to other file list directory.

       1m%rx %"rx0m
	      Full  paths  to  files  in the register {x}.  In case of invalid
	      symbol in place of {x}, it's processed with the rest of the line
	      and default register is used.

       1m%m	22mShow command output in a menu.

       1m%M	22mSame as %m, but l (or Enter) key is handled like for :locate and
	      :find commands.

       1m%u	22mProcess command output as list of paths and compose custom  view
	      out of it.

       1m%U	22mSame  as %u, but implies less list updates inside vifm, which is
	      absence of sorting at the moment.

       1m%Iu	22msame as %u, but gives up terminal before running  external  com-
	      mand.

       1m%IU	22msame  as  %U, but gives up terminal before running external com-
	      mand.

       1m%S	22mShow command output in the status bar.

       1m%q	22mredirect command output to quick view,  which  is  activated  if
	      disabled.

       1m%s	22mExecute  command  in split window of active terminal multiplexer
	      (ignored if not running inside one).

       1m%n	22mForbid using of terminal multiplexer to run the command.

       1m%i	22mCompletely ignore command output.


       1m%pc	22mMarks the end of the main command and the beginning of the clear
	      command  for graphical preview, which is invoked on closing pre-
	      view of a file.

       1m%pd	22mMarks a preview command as one that directly  communicates  with
	      the  terminal.   Beware that this is for things like sixel which
	      are self-contained sequences that depend only on current	cursor
	      position, using this with anything else is likely to mangle ter-
	      minal state.

       The following dimensions and coordinates are in characters:

       1m%px	22mx coordinate of top-left corner of preview area.

       1m%py	22my coordinate of top-left corner of preview area.

       1m%pw	22mwidth of preview area.

       1m%ph	22mheight of preview area.


       Use %% if you need to put a percent sign in your command.

       Note that %m, %M, %s, %S, %i, %u and %U macros are mutually  exclusive.
       Only the last one of them on the command will take effect.

       You  can  use  file  name modifiers after %c, %C, %f, %F, %b, %d and %D
       macros.	Supported modifiers are:

	 - :p		- full path

	 - :u		  -   UNC   name   of	path   (e.g.   "\\server"   in
	   "\\server\share"),  Windows only.  Expands to current computer name
	   for not UNC paths.

	 - :~		- relative to the home directory

	 - :.		- relative to current directory

	 - :h		- head of the file name

	 - :t		- tail of the file name

	 - :r		- root of the file name (without last extension)

	 - :e		- extension of the file name (last one)

	 - :s?pat?sub?	- substitute the first occurrence  of  pat  with  sub.
	   You	can use any character for '?', but it must not occur in pat or
	   sub.

	 - :gs?pat?sub? - like :s, but substitutes all occurrences of pat with
	   sub.

       See  ':h  filename-modifiers'  in  Vim's documentation for the detailed
       description.

       Using %x means expand corresponding macro escaping all characters  that
       have  special meaning.  And %"x means using of double quotes and escape
       only backslash and double quote characters, which  is  more  useful  on
       Windows systems.

       Position  and  quantity (if there is any) of %m, %M, %S or %s macros in
       the command is unimportant.  All their occurrences are removed from the
       resulting command.

       %c  and	%f  macros are expanded to file names only, when %C and %F are
       expanded to full paths.	%f and %F follow this in %b too.

       1m:com move mv %f %D0m
	      set the :move command to move all of the files selected  in  the
	      current directory to the other directory.

       The  %a macro is replaced with any arguments given to an alias command.
       All arguments are considered optional.
	      :com  lsl !!ls -l %a - set the lsl command to execute ls -l with
	      or without an argument.

       1m:lsl<Enter>0m
	      will list the directory contents of the current directory.

       1m:lsl filename<Enter>0m
	      will list only the given filename.

       The macros can also be used in directly executing commands.   ":!mv  %f
       %D" would move the current directory selected files to the other direc-
       tory.

       Appending & to the end of a command causes it to  be  executed  in  the
       background.   Typically	you want to run two kinds of external commands
       in the background:

	 - GUI applications that doesn't fork thus block vifm (:!sxiv %f &);

	 - console tools that do not work with terminal (:!mv %f %D &).

       You don't want to run terminal commands, which require  terminal  input
       or output something in background because they will mess up vifm's TUI.
       Anyway, if you did run such a command, you can use Ctrl-L key to update
       vifm's TUI.

       Rewriting the example command with macros given above with  background-
       ing:

       %m, %M, %s, %S, %u and %U macros cannot	be  combined  with  background
       mark (" &") as it doesn't make much sense.

1mCommand backgrounding0m
       Copy  and move operation can take a lot of time to proceed.  That's why
       vifm supports backgrounding of this  two  operations.   To  run	:copy,
       :move  or :delete command in the background just add " &" at the end of
       a command.

       For each background operation a new thread is created.	Job  cancella-
       tion can be requested in the :jobs menu via dd shortcut.

       You  can  see  if  command  is  still running in the :jobs menu.  Back-
       grounded commands have progress instead	of  process  id  at  the  line
       beginning.

       Background operations cannot be undone.

1mCancellation0m
       Note that cancellation works somewhat different on Windows platform due
       to different mechanism of break signal  propagation.   One  also  might
       need to use Ctrl-Break shortcut instead of Ctrl-C.

       There are two types of operations that can be cancelled:

	 - file system operations;

	 - mounting  with  FUSE  (but  not  unmounting as it can cause loss of
	   data);

	 - calls of external applications.

       Note that vifm never terminates applications, it  sends	SIGINT	signal
       and lets the application quit normally.

       When one of set of operations is cancelled (e.g. copying of 5th file of
       10 files), further operations are cancelled too.   In  this  case  undo
       history will contain only actually performed operations.

       Cancelled  operations are indicated by "(cancelled)" suffix appended to
       information message on statusbar.

       1mFile system operations0m

       Currently the following commands  can  be  cancelled:  :alink,  :chmod,
       :chown,	:clone,  :copy,  :delete,  :mkdir,  :move,  :restore,  :rlink,
       :touch.	File putting (on p/P key) can be cancelled as well.  It's  not
       hard to see that these are mainly long-running operations.

       Cancelling  commands when they are repeated for undo/redo operations is
       allowed for convenience, but is not recommended	as  further  undo/redo
       operations  might  get  blocked	by side-effects of partially cancelled
       group of operations.

       These commands can't be cancelled: :empty, :rename, :substitute, :tr.

       1mMounting with FUSE0m

       It's not considered to be an error, so only notification on the	status
       bar is shown.

       1mExternal application calls0m

       Each  of  this  operations  can	be  cancelled: :apropos, :find, :grep,
       :locate.

1mSelection0m
       If there is a selection, it's stashed before proceeding further	unless
       file  under the cursor is part of that selection.  This means that when
       macros are expanded for :filetype or :filextype programs, `%f` and `%F`
       become  equivalent to `%c` and `%C` respectively if current file is not
       selected.  So you run selection by running one of selected files,  oth-
       erwise  you're  running	a single file even if there are other selected
       entries.

       When running a selection it must not include broken symbolic links, has
       to  be consistent and set of file handlers must be compatible.  Consis-
       tency means that selection contains either only directories  (including
       links to them) or only files, but not their mix.

       Compatibility is a more sophisticated check, but it's defined in a nat-
       ural way so that you get what you'd expect.  The  following  properties
       of selection are taken into account while checking it for compatibility
       and deciding how to handle it:


	 1. If there any files for which handler isn't defined, then all files
	    are opened using 'vicmd' or 'vixcmd'.


	 2. If all handlers match the following criteria:
	     - backgrounded
	     - include `%c` and/or `%C`
	     - include neither `%f` nor `%F`
	    then each file is executed independently of the rest.


	 3. If	all  handlers are equal, the common handler is executed.  This
	    handler might ignore selection and process	only  file  under  the
	    cursor.


	 4. Otherwise,	an error is reported, because handlers differ and they
	    don't support parallel execution.

1mPatterns0m
       :highlight, :filetype, :filextype, :fileviewer commands and  'classify'
       option  support globs, regular expressions and mime types to match file
       names or their paths.

       There are six possible ways to write a single pattern:

	 1. [!]{comma-separated-name-globs}

	 2. [!]{{comma-separated-path-globs}}

	 3. [!]/name-regular-expression/[iI]

	 4. [!]//path-regular-expression//[iI]

	 5. [!]<comma-separated-mime-type-globs>

	 6. undecorated-pattern

       First five forms can include leading exclamation mark that negates pat-
       tern matching.

       The  last  form is implicitly refers to one of others.  :highlight does
       not accept undecorated form, while :filetype, :filextype,  :fileviewer,
       :select, :unselect and 'classify' treat it as list of name globs.

       Path  patterns receive absolute path of the file that includes its name
       component as well.

       To combine several patterns (AND them), make sure you're using  one  of
       the first five forms and write patterns one after another, like this:
	 <text/plain>{*.vifm} Mind that if you make a mistake the whole string
       will be treated as the sixth form.

       :filetype, :filextype and :fileviewer commands  accept  comma-separated
       list of patterns instead of a single pattern, thus effectively handling
       OR operation on them:
	 <text/plain>{*.vifm},<application/pdf>{*.pdf}	 Forms	 that	accept
       comma-separated	lists of patterns also process them as lists of alter-
       natives.

       1mPatterns with regular expressions0m

       Regular expression  patterns  are  case	insensitive  by  default,  see
       description of commands, which might override default behaviour.

       Flags of regular expressions mean the following:
	 - "i" makes filter case insensitive;
	 -  "I"  makes	filter	case sensitive.  They can be repeated multiple
       times, but the later one takes precedence (e.g.	"iiiI"	is  equivalent
       to "I" and "IiIi" is the same as "i").

       There  are no implicit `^` or `$`, so make sure to specify them explic-
       itly if the pattern should match the whole name or path.

       1mPatterns with globs0m

       "Globs" section below provides short overview of globs and some	impor-
       tant points that one needs to know about them.

       1mPatterns with mime-types0m

       Mime  type  matching is essentially globs matching applied to mime type
       of a file instead of its name/path.  Note: mime types  aren't  detected
       on Windows.

       1mExamples0m

       Associate  `evince`  to	PDF-files  only inside `/home/user/downloads/`
       directory (excluding its subdirectories):

	 :filextype //^/home/user/downloads/[^/]*.pdf$// evince %f


1mGlobs0m
       Globs are always case insensitive as it makes sense in general case.

       `*`, `?`, `[` and `]` are treated as special symbols  in  the  pattern.
       E.g.

	 :filetype * less %c

       matches all files.  One can use character classes for escaping, so

	 :filetype [*] less %c

       matches	only  one file name, the one which contains only asterisk sym-
       bol.

       `*` means any number of any characters (possibly an  empty  substring),
       with one exception: asterisk at the pattern beginning doesn't match dot
       in the first position.  E.g.

	 :fileviewer *.zip,*.jar zip -sf %c

       associates using of `zip` program to preview all files  with  `zip`  or
       `jar`  extensions as listing of their content, but `.file.zip` won't be
       matched.

       `?` means any character at this position.  E.g.

	 :fileviewer ?.out file %c

       calls `file` tool for all files which have exactly one character before
       their extension (e.g. a.out, b.out).

       Square brackets designate character class, which means that whole char-
       acter class matches against any of characters listed in it.  For  exam-
       ple

	 :fileviewer *.[ch] highlight -O xterm256 -s dante --syntax c %c

       makes vifm call `highlight` program to colorize source and header files
       in C language for a 256-color terminal.	Equal command would be

	 :fileviewer *.c,*.h highlight -O xterm256 -s dante --syntax c %c


       Inside square brackets `^` or `!` can be used for symbol class negotia-
       tion  and  the  `-`  symbol  to set a range.  `^` and `!` should appear
       right after the opening square bracket.	For example

	 :filetype *.[!d]/ inspect_dir

       associates `inspect_dir` as additional handler for all directories that
       have one character extension unless it's "d" letter.  And

	 :filetype [0-9].jpg sxiv

       associates  `sxiv` picture viewer only for JPEG-files that contain sin-
       gle digit in their name.

       If you need to include literal comma, which is normally separates  mul-
       tiple globs, double it.

1m:set options0m
       1mLocal options0m
	      These are kind of options that are local to a specific view.  So
	      you can set ascending sorting order for left pane and descending
	      order for right pane.

	      In  addition  to being local to views, each such option also has
	      two values:

		- local to current directory (value  associated  with  current
		  location);

		- global  to  current  directory  (value  associated  with the
		  pane).

	      The idea is that current	directory  can	be  made  a  temporary
	      exception  to regular configuration of the view, until directory
	      change.  Use :setlocal for that.	:setglobal changes view  value
	      not  affecting  settings	until  directory change.  :set applies
	      changes immediately to all values.


       1m'aproposprg'0m
	      type: string
	      default: "apropos %a"
	      Specifies format for an external command to be  invoked  by  the
	      :apropos command.  The format supports expanding of macros, spe-
	      cific for a particular *prg option, and %% sequence for  insert-
	      ing  percent  sign literally.  This option should include the %a
	      macro to specify placement of arguments passed to  the  :apropos
	      command.	 If the macro is not used, it will be implicitly added
	      after a space to the value of this option.

       1m'autochpos'0m
	      type: boolean
	      default: true
	      When disabled vifm will set cursor to the first line in the view
	      after  :cd and :pushd commands instead of saved cursor position.
	      Disabling this will also make vifm clear information about  cur-
	      sor position in the view history on :cd and :pushd commands (and
	      on startup if 'autochpos' is disabled in the vifmrc).  l key  in
	      the  ":history ." and ":trashes" menus are treated like :cd com-
	      mand.  This option also affects marks so that  navigating  to  a
	      mark doesn't restore cursor position.

	      When this option is enabled, more fine grained control over cur-
	      sor position is available via 'histcursor' option.

       1m'columns' 'co'0m
	      type: integer
	      default: terminal width on startup
	      Terminal width in characters.

       1m'caseoptions'0m
	      type: charset
	      default: ""
	      This option gives additional control over  case  sensitivity  by
	      allowing	overriding  default behaviour to either always be case
	      sensitive or always be case insensitive.	Possible  values  form
	      pairs  of  lower	and upper case letters that configure specific
	      aspect of behaviour:
		p - always ignore case of paths during completion.
		P - always match case of paths during completion.
		g - always ignore case of characters for f/F/;/,.
		G - always match case of characters for f/F/;/,.

	      At most one item of each pair takes affect, if both or more  are
	      present,	only  the  last one matters.  When none of pair's ele-
	      ments are present, the behaviour is default (depends on  operat-
	      ing system for path completion and on values of 'ignorecase' and
	      'smartcase' options for file navigation).

       1m'cdpath' 'cd'0m
	      type: string list
	      default: value of $CDPATH with commas instead of colons
	      Specifies locations to check on changing directory with relative
	      path  that  doesn't  start  with "./" or "../".  When non-empty,
	      current directory is examined after directories  listed  in  the
	      option.

	      This option doesn't affect completion of :cd command.

	      Example:

		set cdpath=~

	      This  way  ":cd  bin"  will  switch to "~/bin" even if directory
	      named "bin" exists in current directory, while ":cd ./bin"  com-
	      mand will ignore value of 'cdpath'.

       1m'chaselinks'0m
	      type: boolean
	      default: false
	      When  enabled path of view is always resolved to real path (with
	      all symbolic links expanded).

       1m'classify'0m
	      type: string list
	      default: ":dir:/"
	      Specifies file name prefixes and suffixes depending on file type
	      or name.	The format is either of:
		- [{prefix}]:{filetype}:[{suffix}]
		- [{prefix}]::{pattern}::[{suffix}]
	      Possible	{pattern}  forms  are  described in "Patterns" section
	      above.

	      Priority rules:
		- file name patterns have priority over type patterns
		- file name patterns are matched  in  left-to-right  order  of
	      their appearance in this option

	      Either {prefix} or {suffix} or both can be omitted (which is the
	      default for all unspecified file types), this means empty  {pre-
	      fix}  and/or  {suffix}.  {prefix} and {suffix} should consist of
	      at most eight characters.  Elements  are	separated  by  commas.
	      Neither  prefixes  nor  suffixes are part of file names, so they
	      don't affect commands which operate on file names  in  any  way.
	      Comma  (',')  character can be inserted by doubling it.  List of
	      file type names can be found in the  description	of  filetype()
	      function.

       1m'confirm' 'cf'0m
	      type: set
	      default: delete,permdelete
	      Defines which operations require confirmation:
	       - delete     - moving files to trash (on d or :delete);
	       -  permdelete  -  permanent deletion of files (on D or :delete!
	      command or on undo/redo operation).

       1m'cpoptions' 'cpo'0m
	      type: charset
	      default: "fst"
	      Contains	a  sequence  of  single-character  flags.   Each  flag
	      enables behaviour of older versions of vifm.  Flags:
	       -  f  -	when  included, running :filter command results in not
	      inverted (matching files	are  filtered  out)  and  :filter!  in
	      inverted (matching files are left) filter, when omitted, meaning
	      of the exclamation mark changes to the opposite;
	       - s - when included, yy, dd and DD normal mode commands act  on
	      selection, otherwise they operate on current file only;
	       -  t  - when included, <tab> (thus <c-i>) behave as <space> and
	      switches active pane, otherwise <tab> and <c-i>  go  forward  in
	      the view history.  It's possible to make both <tab> and <c-i> to
	      work as expected by setting up the terminal  to  emit  a	custom
	      sequence when <c-i> is pressed; see :histnext for details.

       1m'cvoptions'0m
	      type: set
	      default:
	      Specifies  whether entering/leaving custom views triggers events
	      that normally happen on entering/leaving directories:
	       - autocmds    - trigger autocommands on entering/leaving custom
	      views;
	       -  localopts   - reset local options on entering/leaving custom
	      views;
	       - localfilter - reset local filter on  entering/leaving	custom
	      views.

       1m'deleteprg'0m
	      type: string
	      default: ""
	      Specifies  program to run on files that are permanently removed.
	      When empty, files are removed as usual, otherwise  this  command
	      is  invoked  on each file by appending its name.	If the command
	      doesn't remove files, they will remain on the file system.

       1m'dirsize'0m
	      type: enumeration
	      default: size
	      Controls how size of directories is  displayed  in  file	views.
	      The following values are possible:
	       -  size	 - size of directory (i.e., size used to store list of
	      files)
	       - nitems - number of entries in the directory (excluding .  and
	      ..)

	      Size  obtained via ga/gA overwrites this setting so seeing count
	      of files and occasionally size of directories is possible.

       1m'dotdirs'0m
	      type: set
	      default: nonrootparent,treeleafsparent
	      Controls displaying of dot directories.	The  following	values
	      are possible:
	       - rootparent	 - show "../" in root directory of file system
	       - nonrootparent	 - show "../" in non-root directories of  file
	      system
	       -  treeleafsparent  -  show  "../" in empty directories of tree
	      view

	      Note that empty directories always contain "../"	entry  regard-
	      less of value of this option.  "../" disappears at the moment at
	      least one file is created.

       1m'dotfiles'0m
	      type: boolean
	      default: false
	      Whether dot files are shown in the view.	Can be controlled with
	      z* bindings.

       1m'fastrun'0m
	      type: boolean
	      default: false
	      With  this  option  turned on you can run partially entered com-
	      mands with unambiguous beginning using :! (e.g. :!Te instead  of
	      :!Terminal or :!Te<tab>).

       1m'fillchars' 'fcs'0m
	      type: string list
	      default: ""
	      Sets characters used to fill borders.

		item	     default	used for
		vborder:c     '  '	  left, middle and right vertical bor-
	      ders

	      If value is omitted, its default value is used.  Example:

		set fillchars=vborder:.

       1m'findprg'0m
	      type: string
	      default: "find %s %a -print , -type d \( ! -readable -o !  -exe-
	      cutable \) -prune"
	      Specifies  format  for  an external command to be invoked by the
	      :find command.  The format supports expansion of macros specific
	      for this particular option and %% sequence for inserting percent
	      sign literally.  The macros are:

		macro	value/meaning
		 %s	literal arguments of :find or
			list of paths to search in

		 %A	empty or
			literal arguments of :find
		 %a	empty or
			literal arguments of :find or
			predicate followed by escaped arguments of :find
		 %p	empty or
			literal arguments of :find or
			escaped arguments (parameters) of :find

		 %u	redirect output to custom view instead	of  showing  a
	      menu
		 %U	 redirect  output  to  unsorted custom view instead of
	      showing a menu

	      Predicate in %a is "-name" on *nix and "-iname" on Windows.

	      If both %u and %U are specified, %U is chosen.

	      Some macros can be added implicitly:
	       - if %s isn't present, it's appended
	       - if neither of %a, %A and %p is present, %a is appended
	       - if neither of %s, %a, %A and %p is present,  %s  and  %a  are
	      appended in this order

	      The  macros slightly change their meaning depending on format of
	      :find's arguments:
	       - if the first argument points to an existing directory, %s  is
	      assigned all arguments while %a, %A and %p are left empty
	       - otherwise:
		  -  %s  is  assigned a dot (".") meaning current directory or
	      list of selected file names, if any
		  - %a, %A and %p are assigned literal	arguments  when  first
	      argument	starts with a dash ("-"), otherwise %a gets an escaped
	      version of the  arguments  with  a  predicate  and  %p  contains
	      escaped version of the arguments

	      Starting	with  Windows  Server 2003 a `where` command is avail-
	      able.  One can configure vifm to use it in the following way:

		  set findprg="where /R %s %A"

	      As the syntax of this command is rather limited, one  can't  use
	      :find  command  with selection of more than one item because the
	      command ignores all directory paths except for the last one.

	      When using find port on Windows,	another  option  is  to  setup
	      'findprg' like this:

		  set findprg="find %s %a"


       1m'followlinks'0m
	      type: boolean
	      default: true
	      Follow  links  on  l  or Enter.  That is navigate to destination
	      file instead of treating the link as if  it  were  target  file.
	      Doesn't  affects	links to directories, which are always entered
	      (use gf key for directories).

       1m'fusehome'0m
	      type: string
	      default: "($XDG_DATA_HOME/.local/share | $VIFM)/fuse/"
	      Directory to be used as a root dir for FUSE  mounts.   Value  of
	      the   option   can   contain   environment  variables  (in  form
	      "$envname"), which will be expanded (prepend it with a slash  to
	      prevent  expansion).   The  value  should  expand to an absolute
	      path.

	      If you change this option,  vifm	won't  remount	anything.   It
	      affects future mounts only.  See "Automatic FUSE mounts" section
	      below for more information.

       1m'gdefault' 'gd'0m
	      type: boolean
	      default: false
	      When on, 'g' flag is on for :substitute by default.

       1m'grepprg'0m
	      type: string
	      default: "grep -n -H -I -r %i %a %s"
	      Specifies format for an external command to be  invoked  by  the
	      :grep  command.	The  format supports expanding of macros, spe-
	      cific for a particular *prg option, and %% sequence for  insert-
	      ing  percent  sign literally.  This option should include the %i
	      macro to specify placement of  "-v"  string  when  inversion  of
	      results  is  requested,  %a  or %A macro to specify placement of
	      arguments passed to the :grep command and the %s macro to  spec-
	      ify  placement  of  list	of files to search in.	If some of the
	      macros are not used, they will be implicitly added after a space
	      to the value of the 'grepprg' option in the following order: %i,
	      %a, %s.  Note that when neither %a nor %A are specified, it's %a
	      which is added implicitly.

	      Optional	%u  or %U macro could be used (if both specified %U is
	      chosen) to force redirection to custom or unsorted  custom  view
	      respectively.

	      See  'findprg'  option  for description of difference between %a
	      and %A.

	      Example of setup to use ack (http://beyondgrep.com/) instead  of
	      grep:

		set grepprg='ack -H -r %i %a %s'

	      or   The	 Silver  Searcher  (https://github.com/ggreer/the_sil-
	      ver_searcher):

		set grepprg='ag --line-numbers %i %a %s'



       1m'histcursor'0m
	      type: set
	      default: startup,dirmark,direnter
	      Defines situations when cursor  should  be  moved  according  to
	      directory history:
	       - startup  - on loading file lists during startup
	       -  dirmark   -  after navigating to a mark that doesn't specify
	      file
	       - direnter - on opening directory from a file list

	      This option has no effect when 'autochpos' is disabled.

	      Note that the list is not exhaustive and there are other	situa-
	      tions when cursor is positioned automatically.

       1m'history' 'hi'0m
	      type: integer
	      default: 15
	      Maximum number of stored items in all histories.

       1m'hlsearch' 'hls'0m
	      type: boolean
	      default: true
	      Automatically select files that are search matches.

       1m'iec'	22mtype: boolean
	      default: false
	      Use  KiB,  MiB,  ... suffixes instead of K, M, ... when printing
	      size in human-friendly format.

       1m'ignorecase' 'ic'0m
	      type: boolean
	      default: false
	      Ignore case in search patterns (:substitute, / and ?  commands),
	      local  filter  (but  not	the  rest of filters) and other things
	      detailed in the description of 'caseoptions'.

       1m'incsearch' 'is'0m
	      type: boolean
	      default: false
	      When this option is set, search and view update for local filter
	      is  be performed starting from initial cursor position each time
	      search pattern is changed.

       1m'iooptions'0m
	      type: set
	      default:
	      Controls details of file operations.  The following  values  are
	      available:
	       -  fastfilecloning - perform fast file cloning (copy-on-write),
	      when available
				   (available on Linux and btrfs file system).

       1m'laststatus' 'ls'0m
	      type: boolean
	      default: true
	      Controls if status bar is visible.

       1m'lines'0m
	      type: integer
	      default: terminal height on startup
	      Terminal height in lines.

       1m'locateprg'0m
	      type: string
	      default: "locate %a"
	      Specifies  format  for  an external command to be invoked by the
	      :locate command.	The format supports expanding of macros,  spe-
	      cific  for a particular *prg option, and %% sequence for insert-
	      ing percent sign literally.  This option should include  the  %a
	      macro  to  specify  placement of arguments passed to the :locate
	      command.	If the macro is not used, it will be implicitly  added
	      after a space to the value of this option.

	      Optional	%u  or %U macro could be used (if both specified %U is
	      chosen) to force redirection to custom or unsorted  custom  view
	      respectively.

       1m'mediaprg'0m
	      type: string
	      default: path to bundled script that supports udevil, udisks and
	      udisks2
		       (using  udisks2	requires  python  with	 dbus	module
	      installed)
		       OS X: path points to a python script that uses diskutil
	      {only for *nix}
	      Specifies command to be used to manage media devices.   Used  by
	      :media command.

	      The command can be passed the following parameters:
	       - list		-- list media
	       - mount {device} -- mount a device
	       - unmount {path} -- unmount given mount point

	      The  output  of  `list`  subcommand is parsed in search of lines
	      that start with one of the following prefixes:
	       - device=      - specifies device path (e.g., "/dev/sde")
	       - label=       - specifies optional device label (e.g., "Memory
	      card")
	       -  info= 	-  specifies arbitrary text to display next to
	      device (by
				default "[label]" is used, if  label  is  pro-
	      vided)
	       -  mount-point=	-  specifies  a  mount point (can be absent or
	      appear more than once)

	      All other lines are ignored.  Each `device=` starts a  new  sec-
	      tion describing a device which should include two other possible
	      prefixes.

	      `list` subcommand is assumed to always succeed, while exit  code
	      of  `mount`  and	`unmount`  is  taken into account to determine
	      whether operation was performed successfully.

       1m'lsoptions'0m
	      type: string list
	      default: ""
	      scope: local

	      Configures ls-like view.

		item	      used for
		transposed    filling view grid  by  columns  rather  than  by
	      lines


       1m'lsview'0m
	      type: boolean
	      default: false
	      scope: local
	      When  this  option  is  set, directory view will be displayed in
	      multiple columns with file names similar to output  of  `ls  -x`
	      command.	 See  "ls-like view" section below for format descrip-
	      tion.  This option has no effect if 'millerview' is on.

       1m'milleroptions'0m
	      type: string list
	      default: "lsize:1,csize:1,rsize:1,rpreview:dirs"
	      scope: local

	      Configures miller view.

		item	      default  used for
		lsize:num     0        left column
		csize:num     1        center column (can't be disabled)
		rsize:num     0        right column
		rpreview:str  dirs     right column

	      *size specifies ratios of columns.  Each ratio is in  the  range
	      from  0  to 100 and values are adjusted to fit the limits.  Zero
	      disables a column, but central (main) column can't be  disabled.

	      rpreview	specifies what file-system objects should be previewed
	      in the right column and can take two values: dirs (only directo-
	      ries)  or  all.	Both  options  don't  include parent directory
	      ("..").

	      Example of two-column mode which is useful in  combination  with
	      :view command:

		set milleroptions=lsize:1,csize:2


       1m'millerview'0m
	      type: boolean
	      default: false
	      scope: local
	      When  this  option  is  set, directory view will be displayed in
	      multiple cascading columns.  Ignores 'lsview'.

       1m'mintimeoutlen'0m
	      type: integer
	      default: 150
	      The fracture of 'timeoutlen'  in	milliseconds  that  is	waited
	      between  subsequent input polls, which affects various asynchro-
	      nous operations (detecting changes  made	by  external  applica-
	      tions,  monitoring background jobs, redrawing UI).  There are no
	      strict guarantees, however the higher this value is, the less is
	      CPU load in idle mode.

       1m'number' 'nu'0m
	      type: boolean
	      default: false
	      scope: local
	      Print  line  number  in  front  of  each file name when 'lsview'
	      option is turned off.  Use 'numberwidth'	to  control  width  of
	      line number.  Also see 'relativenumber'.

       1m'numberwidth' 'nuw'0m
	      type: integer
	      default: 4
	      scope: local
	      Minimal number of characters for line number field.

       1m'previewprg'0m
	      type: string
	      default: ""
	      scope: local

	      External	command to be used instead of preview programs config-
	      ured via :fileviewer command.

	      Example:

		" always show git log in preview of files inside some  reposi-
	      tory
		au DirEnter '~/git-repo/**/*' setl previewprg='git log --color
	      -- %c 2>&1'

       1m'quickview'0m
	      type: boolean
	      default: false
	      Whether quick view (:view) is currently active or not.

       1m'relativenumber' 'rnu'0m
	      type: boolean
	      default: false
	      scope: local
	      Print relative line number in  front  of	each  file  name  when
	      'lsview'	option	is  turned  off.  Use 'numberwidth' to control
	      width of line number.   Various  combinations  of  'number'  and
	      'relativenumber' lead to such results:

				      nonumber		     number

		  norelativenumber   | first		    |	1 first
				     | second		    |	2 second
				     | third		    |	3 third

		    relativenumber   |	 1 first	    |	1 first
				     |	 0 second	    |2	  second
				     |	 1 third	    |	1 third


       1m'rulerformat' 'ruf'0m
	      type: string
	      default: "%l/%S "
	      Determines  the  content	of the ruler.  Its minimal width is 13
	      characters and it's right aligned.  Following  macros  are  sup-
	      ported:
	       %=  - separation point between left and right aligned halves of
	      the line
	       %l  - file number
	       %L  - total number of files in  view  (including  filtered  out
	      ones)
	       %x  - number of files excluded by filters
	       %0- - old name for %x macro
	       %S  - number of displayed files
	       %=  - separation point between left and right align items
	       %%  - literal percent sign
	       %[  - designates beginning of an optional block
	       %]  - designates end of an optional block

	      Percent  sign  can  be followed by optional minimum field width.
	      Add '-' before minimum field width if you want field to be right
	      aligned.

	      Optional	blocks are ignored unless at least one macro inside of
	      them is expanded to a non-empty value.

	      Example:

		set rulerformat='%2l-%S%[ +%x%]'

       1m'runexec'0m
	      type: boolean
	      default: false
	      Run executable file on Enter, l or Right Arrow  key.   Behaviour
	      of the last two depends on the value of the 'lsview' option.

       1m'scrollbind' 'scb'0m
	      type: boolean
	      default: false
	      When  this  option  is  set, vifm will try to keep difference of
	      scrolling positions of two windows constant.

       1m'scrolloff' 'so'0m
	      type: integer
	      default: 0
	      Minimal number of screen lines to keep above and below the  cur-
	      sor.   If you want cursor line to always be in the middle of the
	      view (except at the beginning or end of the file list), set this
	      option to some large value (e.g. 999).

       1m'sessionoptions' 'ssop'0m
	      sessionoptions ssop
	      type: set
	      default: tui,state,tabs,savedirs,dhistory
	      An  equivalent of 'vifminfo' for sessions, uses the same values.
	      When both options include the same value, data from session file
	      has  higher  priority (data from vifminfo isn't necessarily com-
	      pletely discarded, instead it's merged with the state of a  ses-
	      sion  the  same  way  state  of  multiple instances is merged on
	      exit).

       1m'shell' 'sh'0m
	      type: string
	      default: $SHELL or "/bin/sh" or "cmd" (on MS-Windows)
	      Full path to the shell to use to run external commands.  On *nix
	      a shell argument can be supplied.

       1m'shellcmdflag' 'shcf'0m
	      type: string
	      default: "-c" or "/C" (for cmd.exe on MS-Windows)
	      Command-line  option  used  to  pass a command to 'shell'.  It's
	      used in contexts where command comes from the user.

	      Note that using this option to force  interactive  mode  of  the
	      shell  is  most  likely a BAD IDEA.  In general interactive host
	      and interactive child shell can't share the same	terminal  ses-
	      sion.   You can't even run such a shell in background.  Consider
	      writing a wrapper for your shell that preloads aliases and  com-
	      mands  without  making the shell interactive and ending up using
	      it in a way it was not meant to be used.

	      Note that this option is ignored when 'shell' is set  to	Power-
	      Shell due to the internal use of `-encodedCommand`.

       1m'shortmess' 'shm'0m
	      type: charset
	      default: "p"
	      Contains	a  sequence  of  single-character  flags.   Each  flag
	      enables shortening of some message displayed by vifm in the TUI.
	      Flags:
	       -  L  - display only last directory in tab line instead of full
	      path.
	       - M - shorten titles in windows of terminal  multiplexers  cre-
	      ated by vifm down to file name instead of using full path.
	       -  T  -	truncate status-bar messages in the middle if they are
	      too long to fit on the command line.  "..." will appear  in  the
	      middle.
	       - p - use tilde shortening in view titles.


       1m'showtabline' 'stal'0m
	      type: enumeration
	      default: multiple
	      Specifies when tab line should be displayed.  Possible values:
	       - never	  - never display tab line
	       -  multiple  -  show  tab line only when there are at least two
	      tabs
	       - always   - display tab line always

	      Alternatively 0, 1 and 2 Vim-like values	are also accepted  and
	      correspond to "never", "multiple" and "always" respectively.


       1m'sizefmt'0m
	      type: string list
	      default: "units:iec"
	      Configures  the  way  size is formatted in human-friendly
	      way.

		  item		value	      meaning
		  units:	iec	      Use 1024 byte units (K or
	      KiB, etc.).
					      See 'iec' option.
				si	       Use 1000 byte units (KB,
	      etc.).
		  precision:	i > 0	      How many fraction  digits
	      to consider.
				{not  set}     Precision of 1 for inte-
	      ger part < 10,
					      0 otherwise (provides old
	      behaviour).
		  space 	 {present}     Insert space before unit
	      symbols.
					      This is the default.
		  nospace	 {present}	Do  not  insert   space
	      before unit symbols.

	      Numbers  are  rounded  from  zero.   Trailing  zeros  are
	      dropped.

	      Example:

		set sizefmt=units:iec,precision:2,nospace


       1m'slowfs'0m
	      type: string list
	      default: ""
	      only for *nix
	      A list of mounter fs name  beginnings  (first  column  in
	      /etc/mtab   or   /proc/mounts)   or  paths  prefixes  for
	      fs/directories that work too slow for you.   This  option
	      can  be  used  to  stop vifm from making some requests to
	      particular kinds of file systems that can slow down  file
	      browsing.   Currently this means don't check if directory
	      has changed, skip  check	if  target  of	symbolic  links
	      exists,  assume that link target located on slow fs to be
	      a directory (allows entering directories	and  navigating
	      to files via gf).  If you set the option to "*", it means
	      all the systems are considered slow (useful  for	cygwin,
	      where all the checks might render vifm very slow if there
	      are network mounts).

	      Example for autofs root /mnt/autofs:

		set slowfs+=/mnt/autofs

       1m'smartcase' 'scs'0m
	      type: boolean
	      default: false
	      Overrides the ignorecase option if a pattern contains  at
	      least  one upper case character.	Only used when 'ignore-
	      case' option is enabled.

       1m'sort' 22mtype: string list
	      default: +name on *nix and +iname on Windows
	      scope: local
	      Sets list of sorting keys (first	item  is  primary  key,
	      second is secondary key, etc.):
		 [+-]ext     - extension of files and directories
		 [+-]fileext - extension of files only
		 [+-]name    - name (including extension)
		 [+-]iname   - name (including extension, ignores case)
		 [+-]type	       -	   file 	   type
	      (dir/reg/exe/link/char/block/sock/fifo)
		 [+-]dir     - directory grouping (directory < file)
		 [+-]gid     - group id (*nix only)
		 [+-]gname   - group name (*nix only)
		 [+-]mode     -  file  type derived from its mode (*nix
	      only)
		 [+-]perms   - permissions string (*nix only)
		 [+-]uid     - owner id (*nix only)
		 [+-]uname   - owner name (*nix only)
		 [+-]nlinks  - number of hard links (*nix only)
		 [+-]inode   - inode number (*nix only)
		 [+-]size    - size
		 [+-]nitems  - number of items in a directory (zero for
	      files)
		 [+-]groups  - groups extracted via regexps from 'sort-
	      groups'
		 [+-]target  - symbolic link target  (empty  for  other
	      file types)
		 [+-]atime   - time accessed (e.g. read, executed)
		 [+-]ctime    - time changed (changes in metadata, e.g.
	      mode)
		 [+-]mtime   - time modified  (when  file  contents  is
	      changed)

	      Note:  look for st_atime, st_ctime and st_mtime in "man 2
	      stat" for more information on time keys.

	      '+' means ascending sort for  this  key,	and  '-'  means
	      descending sort.

	      "dir"  key  is  somewhat	similar in this regard but it's
	      added implicitly: when "dir" is  not  specified,	sorting
	      behaves  as  if it was the first key in the list.  That's
	      why if one wants sorting algorithm to mix directories and
	      files,  "dir"  should  be appended to sorting option, for
	      example like this:

		set sort+=dir

	      or

		set sort=-size,dir

	      Value of the option is checked to  include  dir  key  and
	      default  sorting	key  (name  on *nix, iname on Windows).
	      Here is what happens if one of them is missing:

		- type key is added at the beginning;

		- default key is added at the end;

	      all other keys are  left	untouched  (at	most  they  are
	      moved).

	      This  option  also changes view columns according to pri-
	      mary sorting key set, unless 'viewcolumns' option is  not
	      empty.

       1m'sortnumbers'0m
	      type: boolean
	      default: false
	      scope: local
	      Natural sort of (version) numbers within text.

       1m'sortgroups'0m
	      type: string
	      default: ""
	      scope: local
	      Sets  comma-separated  list  of  regular	expressions for
	      group type of sorting.  Double the  comma  to  insert  it
	      literally.

	      The regular expressions are used to extract substrings of
	      file names to serve as keys for sorting.	 It  is  essen-
	      tially  a way to ignore uninteresting parts of file names
	      during sorting by name.

	      Each expression should contain at least one group or  its
	      value  will be considered to be always empty.  Also, only
	      the first match of regular expression is processed.

	      The first group divides list of  files  into  sub-groups,
	      each  of	which  is  then  sorted by substrings extracted
	      using second regular expression and so on recursively.

	      Example:
		set sortgroups=-(todo|done).*  this would  group  files
	      with  "-done" in their names and files with "-todo" sepa-
	      rately.  On ascending sorting, group  containing	"-done"
	      would appear before the other one.

       1m'sortorder'0m
	      type: enumeration
	      default: ascending
	      Sets sort order for primary key: ascending, descending.

       1m'statusline' 'stl'0m
	      type: string
	      default: ""
	      Determines the content of the status line (the line right
	      above command-line).  Empty string means use same  format
	      like  in	previous  versions.   Following macros are sup-
	      ported:

	      - %t - file name (considering  value  of	the  'classify'
		option)

	      - %T - symbolic link target (empty for other filetypes)

	      - %f - file name relative to current directory (considers
		'classify')

	      - %A - file attributes (permissions on *nix or properties
		on Windows)

	      - %u - user name or uid (if it cannot be resolved)

	      - %g - group name or gid (if it cannot be resolved)

	      - %s - file size in human readable format

	      - %E  -  size of selected files in human readable format,
		same as %s when no files are selected, except  that  it
		will  never  show  size of ../ in visual mode, since it
		cannot be selected

	      - %d - file modification date (uses 'timefmt' option)

	      - %D - path of the other pane for single-pane layout

	      - %a - amount of free space available at	current  parti-
		tion

	      - %z - short tips/tricks/hints that chosen randomly after
		one minute period

	      - %{<expr>}  -   evaluate   arbitrary   vifm   expression
		'<expr>', e.g. '&sort'

	      - %*  -  resets  or applies one of User1..User9 highlight
		groups; reset happens when width  field  is  0	or  not
		specified,  one  of groups gets picked when width field
		is in the range from 1 to 9

	      - all 'rulerformat' macros

	      Percent sign can be followed by  optional  minimum  field
	      width.   Add  '-'  before minimum field width if you want
	      field to be right aligned.

	      On Windows file properties include  the  following  flags
	      (upper case means flag is on):
	       A - archive
	       H - hidden
	       I - content isn't indexed
	       R - readonly
	       S - system
	       C - compressed
	       D - directory
	       E - encrypted
	       P - reparse point (e.g. symbolic link)
	       Z - sparse file

	      Example without colors:

		set  statusline="  %t%= %A %10u:%-7g %15s %20d %{&sort}
	      "

	      Example with colors:

	       highlight User1 ctermbg=yellow
	       highlight User2 ctermbg=blue ctermfg=white cterm=bold
	       set statusline="%1* %-26t %2* %= %1* %A %2* %7u:%-7g %1*
	      %-5s %2* %d "


       1m'suggestoptions'0m
	      type: string list
	      default:
	      Controls	when,  for  what  and  how suggestions are dis-
	      played.  The following values are available:
	       - normal 	 - in normal mode;
	       - visual 	 - in visual mode;
	       - view		 - in view mode;
	       - otherpane	 - use other pane  to  display	sugges-
	      tions, when available;
	       -  delay[:num]	   -  display suggestions after a small
	      delay (to do not annoy if you just want to  type	a  fast
	      shortcut	consisting of multiple keys), num specifies the
	      delay in ms (500 by default), 'timeoutlen' at most;
	       - keys		  -  include  shortcuts  (commands  and
	      selectors);
	       -  foldsubkeys	  - fold multiple keys with common pre-
	      fix;
	       - marks		 - include marks;
	       - registers[:num] - include registers, at most num files
	      (5 by default).

       1m'syncregs'0m
	      type: string
	      default:
	      Specifies  identifier  of  group	of instances that share
	      registers between each other.  When several instances  of
	      vifm  have this option set to identical value, they auto-
	      matically synchronize  contents  of  their  registers  on
	      operations which use them.

       1m'syscalls'0m
	      type: boolean
	      default: false
	      When disabled, vifm will rely on external applications to
	      perform file-system operations,  otherwise  system  calls
	      are  used  instead  (much  faster  and  supports progress
	      tracking).  The  option  should  eventually  be  removed.
	      Mostly *nix-like systems are affected.

       1m'tablabel'0m
	      type: string
	      default: ""
	      When  non-empty,	determines format of the main part of a
	      single tab's label.

	      When empty, tab label is set to either tab name for named
	      tabs  or to view title (usually current path) for unnamed
	      tabs.

	      The following macros can appear in the format (see  below
	      for what a flag is):

	      - %C	- flag of a current tab

	      - %N	- number of the tab

	      - %T	- flag of a tree mode

	      - %c	- description of a custom view

	      - %n	- name of the tab

	      - %p	- path of the view (handles filename modifiers)

	      - %t	- title of the view  (affected	by  'shortmess'
		flags)

	      - %%	- literal percent sign

	      - %[	- designates beginning of an optional block

	      - %]	- designates end of an optional block

	      - %*, %0* - resets highlighting

	      - %1-%9	- applies one of User1..User9 highlight groups

	      In  global  tabs the view in bullets above refers to cur-
	      rently active view of that tab.

	      Flag macros are a special  kind  of  macros  that  always
	      expand  to  an empty value and are ment to be used inside
	      optional blocks to control their visibility.

	      Optional blocks are ignored unless  at  least  one  macro
	      inside  of  them is expanded to a non-empty value or is a
	      set flag macro.

		" %[(%n)%]	  -- optional name of the tab
		" %[		  -- optional description of the view
		"   %[%T{tree}%]  -- mark of tree mode
		"   %[{%c}%]	  -- description of custom view
		"   @		  -- just an extra separator before the
	      path
		' %]
		" %p:t		  -- tail part of view's location
		set tablabel=%[(%n)%]%[%[%T{tree}%]%[{%c}%]@%]%p:t

       1m'tabprefix'0m
	      type: string
	      default: "[%N:"
	      Determines  prefix  of a tab's label.  Formatting is done
	      as for 'tablabel' option.

       1m'tabscope'0m
	      type: enumeration
	      default: global
	      Picks style of tabs, which defines what a single tab con-
	      tains.  Possible values:
	       -  global  -  tab describes complete UI of two views and
	      how they are arranged
	       - pane	- tab is located "inside" a pane and manages it
	      and quick view

       1m'tabstop' 'ts'0m
	      type: integer
	      default: value from curses library
	      Number of spaces that a Tab in the file counts for.

       1m'tabsuffix'0m
	      type: string
	      default: "]"
	      Determines  suffix  of a tab's label.  Formatting is done
	      as for 'tablabel' option.

       1m'timefmt'0m
	      type: string
	      default: "%m/%d %H:%M"
	      Format of time in file list.  See "man 1 date" or "man  3
	      strftime" for details.

       1m'timeoutlen' 'tm'0m
	      type: integer
	      default: 1000
	      The  time in milliseconds that is waited for a mapped key
	      in case of already typed key sequence is ambiguous.

       1m'title'0m
	      type: boolean
	      default: true when title can be restored, false otherwise
	      When  enabled,  title  of the terminal or terminal multi-
	      plexer's window is updated according to current location.
	      Because  not  all  terminals  support setting title, this
	      works only if `$TERM` value matches one of the  following
	      conditions:
	       - equals "xterm" or starts with "xterm-"
	       - equals "rxvt" or starts with "rxvt-"
	       - equals "screen" or starts with "screen-"
	       - equals "aterm"
	       - equals "Eterm"

       1m'trash'0m
	      type: boolean
	      default: true
	      Use  trash  directory.   See  "Trash  directory"	section
	      below.

       1m'trashdir'0m
	      type: string
	      default: on *nix:
		 "%r/.vifm-Trash-%u,$VIFM/Trash,%r/.vifm-Trash"
		 or if $VIFM/Trash doesn't exist
		 "%r/.vifm-Trash-%u,$XDG_DATA_HOME/vifm/Trash,%r/.vifm-
	      Trash"
		       on Windows:
		 "%r/.vifm-Trash,$XDG_DATA_HOME/vifm/Trash"
	      List  of	trash  directory path specifications, separated
	      with commas.  Each list item either defines  an  absolute
	      path  to	trash  directory  or a path relative to a mount
	      point root when list element starts with "%r/".  Value of
	      the  option  can	contain  environment variables (of form
	      "$envname"), which will be expanded  (prepend  $	with  a
	      slash  to  prevent expansion).  Environment variables are
	      expanded when the option is set.

	      On *nix, if element ends with "%u", the mark is  replaced
	      with  real  user	ID and permissions are set so that only
	      that only owner is able to use it.
	      1mNote 22mthat even this setup is not completely	secure	when
	      combined	with "%r/" and it's overall safer to keep files
	      in home directory, but that implies cost of copying files
	      between partitions.

	      When new file gets cut (deleted) vifm traverses each ele-
	      ment of the option in the order of their	appearance  and
	      uses  first trash directory that it was able to create or
	      that is already writable.

	      Default value tries to  use  trash  directory  per  mount
	      point and falls back to ~/.vifm/Trash on failure.

	      Will  attempt  to  create  the  directory  if it does not
	      exist.  See "Trash directory" section below.

       1m'tuioptions' 'to'0m
	      type: charset
	      default: "psv"
	      Each flag configures some aspect of TUI appearance.   The
	      flags are:
	      p - when included:
		*  file list inside a pane gets additional single char-
	      acter padding on left and right sides;
		* quick view and view mode get	single	character  pad-
	      ding.
	      s  - when included, left and right borders (side borders,
	      hence "s" character) are visible.
	      u - use Unicode characters in the TUI  (Unicode  ellipsis
	      instead of "...").
	      v - vary width of middle border to equalize view sizes.

       1m'undolevels' 'ul'0m
	      type: integer
	      default: 100
	      Maximum  number of changes that can be undone.  Note that
	      here single file operation is used as a unit, not  opera-
	      tion,  i.e.  deletion  of  101  files will exceed default
	      limit.

       1m'vicmd'0m
	      type: string
	      default: "vim"
	      Command used to edit files in various  contexts.	 Amper-
	      sand sign at the end (regardless whether it's preceded by
	      space or not) means backgrounding of command.

	      Background flag is ignored in certain context where  vifm
	      waits  for  the  editor to finish.  Such contexts include
	      any command that spawns editor to  change  list  of  file
	      names or a command, with :rename being one example.  `-f`
	      is also appended to prevent forking in such cases, so the
	      command needs to handle the flag.

	      Additionally  `+{num}`  and  `+'call cursor()'` arguments
	      are used to position cursor when location is known.

       1m'viewcolumns'0m
	      type: string
	      default: ""
	      scope: local
	      Format string containing list of	columns  in  the  view.
	      When  this option is empty, view columns to show are cho-
	      sen automatically using sorting keys (see  'sort')  as  a
	      base.   Value  of  this  option is ignored if 'lsview' is
	      set.  See "Column view" section below for format descrip-
	      tion.

	      An  example  of  setting the options for both panes (note
	      :windo command):

		windo set viewcolumns=-{name}..,6{size},11{perms}

       1m'vixcmd'0m
	      type: string
	      default: value of 'vicmd'
	      Same as 'vicmd', but takes precedence over it  when  run-
	      ning inside a graphical environment.

       1m'vifminfo'0m
	      type: set
	      default: bookmarks,bmarks
	      Controls what will be saved in the $VIFM/vifminfo file.

		 bmarks    - named bookmarks (see :bmark command)
		 bookmarks - marks, except special ones like '< and '>
		 tui	   - state of the user interface (sorting, num-
	      ber of windows, quick
			     view state, active view)
		 dhistory  - directory history
		 state	   - file name and  dot  filters  and  terminal
	      multiplexers integration
			     state
		 cs	   - primary color scheme
		 savedirs  - save last visited directory
		 chistory  - command line history
		 shistory  - search history (/ and ? commands)
		 phistory  - prompt history
		 fhistory   -  history of local filter (see description
	      of the "=" normal mode
			     command)
		 dirstack  - directory stack overwrites previous stack,
	      unless stack of
			     current instance is empty
		 registers - registers content
		 tabs	   - global or pane tabs
		 options    - all options that can be set with the :set
	      command (obsolete)
		 filetypes - associated programs and viewers (obsolete)
		 commands    -	user  defined  commands  (see  :command
	      description) (obsolete)

       1m'vimhelp'0m
	      type: boolean
	      default: false
	      Use vim help format.

       1m'wildmenu' 'wmnu'0m
	      type: boolean
	      default: false
	      Controls whether possible matches of completion  will  be
	      shown above the command line.

       1m'wildstyle'0m
	      type: enumeration
	      default: bar
	      Picks presentation style of wild menu.  Possible values:
	       - bar   - one-line with left-to-right cursor
	       - popup - multi-line with top-to-bottom cursor

       1m'wordchars'0m
	      type: string list
	      default:	"1-8,14-31,33-255"  (that is all non-whitespace
	      characters)
	      Specifies which characters in command-line mode should be
	      considered  as  part  of	a word.  Value of the option is
	      comma-separated list of ranges.  If both endpoints  of  a
	      range  match,  single  endpoint is enough (e.g. "a" = "a-
	      a").   Both  endpoints  are  inclusive.	There  are  two
	      accepted	forms:	character representing itself or number
	      encoding character according to ASCII table.  In case  of
	      ambiguous  characters  (dash,  comma,  digit) use numeric
	      form.  Accepted characters are in the  range  from  0  to
	      255.  Any Unicode character with code greater than 255 is
	      considered to be part of a word.

	      The option affects Alt-D, Alt-B and Alt-F, but not  Ctrl-
	      W.  This is intentionally to allow two use cases:

	       - Moving by WORDS and deletion by words.
	       - Moving by words and deletion by WORDS.

	      To get the latter use the following mapping:

		cnoremap <c-w> <a-b><a-d>

	      Also used for abbreviations.

       1m'wrap' 22mtype: boolean
	      default: true
	      Controls whether to wrap text in quick view.

       1m'wrapscan' 'ws'0m
	      type: boolean
	      default: true
	      Searches wrap around end of the list.

1mMappings0m
       1mMap arguments0m

       LHS of mappings can be preceded by arguments which take the form
       of special sequences:

       1m<silent>0m
	      Postpone UI updates until RHS is completely processed.

       1m<wait> 22mIn case of builtin mapping causing conflict for  a  user-
	      defined  mapping	(e.g., `t` builtin to a partially typed
	      `ta` user-defined mapping), ignore  the  builtin	mapping
	      and wait for input indefinitely as opposed to default be-
	      haviour of triggering the builtin mapping after  a  delay
	      defined by 'timeoutlen'.	Example:

		nnoremap <wait> tw :set wrap!<cr>
		nnoremap <wait> tn :set number!<cr>
		nnoremap <wait> tr :set relativenumber!<cr>


       1mSpecial sequences0m

       Since  it's  not easy to enter special characters there are sev-
       eral special sequences that can be used in place of them.   They
       are:

       1m<cr>	22mEnter key.

       1m<esc>	22mEscape key.

       1m<space>0m
	      Space key.

       1m<lt>	22mLess-than character (<).

       1m<nop>	22mprovides  a	way  to  disable a mapping (by mapping it to
	      <nop>).

       1m<bs>	22mBackspace key (see key conflict description below).

       1m<tab> <s-tab>0m
	      Tabulation and Shift+Tabulation keys.

       1m<home> <end>0m
	      Home/End.

       1m<left> <right> <up> <down>0m
	      Arrow keys.

       1m<pageup> <pagedown>0m
	      PageUp/PageDown.

       1m<del> <delete>0m
	      Delete key.  <del> and <delete> mean different codes, but
	      <delete> is more common.

       1m<insert>0m
	      Insert key.

       1m<c-a>,<c-b>,...,<c-z>,<c-[>,<c->,<c-]>,<c-^>,<c-_>0m
	      Control  + some key (see key conflict description below).

       1m<c-@>	22monly for *nix
	      Control + Space.

       1m<a-a>,<a-b>,...,<a-z>0m
	      1m<m-a>,<m-b>,...,<m-z> 22mAlt + some key.

       1m<a-c-a>,<a-c-b>,...,<a-c-z>0m
	      1m<m-c-a>,<m-c-b>,...,<m-c-z> 22monly for *nix
	      Alt + Ctrl + some key.

       1m<f0> - <f63>0m
	      Functional keys.

       1m<c-f1> - <c-f12>0m
	      only for MS-Windows
	      functional keys with Control key pressed.

       1m<a-f1> - <a-f12>0m
	      only for MS-Windows
	      functional keys with Alt key pressed.

       1m<s-f1> - <s-f12>0m
	      only for MS-Windows
	      functional keys with Shift key pressed.

       Note that due to the way terminals process their input,	several
       keyboard keys might be mapped to single key code, for example:

	 - <cr> and <c-m>;

	 - <tab> and <c-i>;

	 - <c-h> and <bs>;

	 - etc.

       Most  of  the time they are defined consistently and don't cause
       surprises, but <c-h> and <bs> are treated differently in differ-
       ent  environments (although they match each other all the time),
       that's why they correspond to different keys in vifm.  As a con-
       sequence, if you map <c-h> or <bs> be sure to repeat the mapping
       with the other one so that it works in all environments.  Alter-
       natively,  provide  your  mapping in one form and add one of the
       following:

	 " if mappings with <c-h> in the LHS work
	 map <c-h> <bs>
	 " if mappings with <bs> in the LHS work
	 map <bs> <c-h>

       1mWhitespace0m

       vifm removes whitespace characters at the beginning and	end  of
       commands.   That's why you may want to use <space> at the end of
       rhs in mappings.  For example:

	 cmap <f1> man<space>

       will put "man " in line when you hit the <f1> key in the command
       line mode.

1mExpression syntax0m
       Supported expressions is a subset of what VimL provides.

       Expression syntax summary, from least to most significant:

       expr1	  expr2
		  expr2 || expr2 ..	  logical OR

       expr2	  expr3
		  expr3 && expr3 ..	  logical AND

       expr3	  expr4
		  expr4 == expr4	  equal
		  expr4 != expr4	  not equal
		  expr4 >  expr4	  greater than
		  expr4 >= expr4	  greater than or equal
		  expr4 <  expr4	  smaller than
		  expr4 <= expr4	  smaller than or equal

       expr4	  expr5
		  expr5 + expr5 ..	  number addition
		  expr5 - expr5 ..	  number subtraction

       expr5	  expr6
		  expr6 . expr6 ..	  string concatenation

       expr6	  expr7
		  - expr6		  unary minus
		  + expr6		  unary plus
		  ! expr6		  logical NOT

       expr7	  number		  number constant
		  "string"		  string constant, \ is special
		  'string'		  string constant, ' is doubled
		  &option		  option value
		  $VAR			  environment variable
		  v:var 		  builtin variable
		  function(expr1, ...)	  function call
		  (expr1)		  nested expression

       ".." indicates that the operations in this level can be concate-
       nated.

       expr1
       -----
       expr2 || expr2

       Arguments are converted to numbers before evaluation.

       Result is non-zero if at least one of arguments is non-zero.

       It's right associative and with short-circuiting, so sub-expres-
       sions  are  evaluated  from  left to right until result of whole
       expression is determined (i.e., until first non-zero) or end  of
       the expression.

       expr2
       -----
       expr3 && expr3

       Arguments are converted to numbers before evaluation.

       Result is non-zero only if both arguments are non-zero.

       It's right associative and with short-circuiting, so sub-expres-
       sions are evaluated from left to right  until  result  of  whole
       expression  is determined (i.e., until first zero) or end of the
       expression.

       expr3
       -----
       expr4 {cmp} expr4

       Compare two expr4 expressions, resulting in a 0 if it  evaluates
       to false or 1 if it evaluates to true.

       equal		       ==
       not equal	       !=
       greater than	       >
       greater than or equal   >=
       smaller than	       <
       smaller than or equal   <=

       Examples:

	 'a' ==  'a'	     == 1
	 'a' >	 'b'	     == 1
	 'a' ==  'b'	     == 0
	 '2' >	 'b'	     == 0
	  2  >	 'b'	     == 1
	  2  >	 '1b'	     == 1
	  2  >	 '9b'	     == 0
	 -1  == -'1'	     == 1
	  0  ==  '--1'	     == 1

       expr4
       -----
       expr5 + expr5 ..     number addition expr5 - expr5 ..	 number
       subtraction

       Examples:

	 1 + 3 - 3	    == 1
	 1 + '2'	    == 3

       expr5
       -----
       expr6 . expr6 ..     string concatenation

       Examples:

	 'a' . 'b'	     == 'ab'
	 'aaa' . '' . 'c'    == 'aaac'

       expr6
       -----

       - expr6		    unary minus
       + expr6		    unary plus
       ! expr6		    logical NOT

       For '-' the sign of the number is changed.
       For '+' the number is unchanged.
       For '!' non-zero becomes zero, zero becomes one.

       A String will be converted to a Number first.

       These operations can be repeated and mixed.  Examples:

	  --9		     == 9
	 ---9		     == -9
	  -+9		     == 9
	  !-9		     == 0
	  !''		     == 1
	 !'x'		     == 0
	  !!9		     == 1

       expr7
       -----

       number		    number constant
       -----

       Decimal number.	Examples:

	 0		     == 0
	 0000		     == 0
	 01		     == 1
	 123		     == 123
	 10000		     == 10000

       string
       ------
       "string" 	    string constant

       Note that double quotes are used.

       A string constant accepts these special characters:
	 \b	 backspace <bs>
	 \e	 escape <esc>
	 \n	 newline
	 \r	 return <cr>
	 \t	 tab <tab>
	 \\	 backslash
	 \"	 double quote

       Examples:

	 "\"Hello,\tWorld!\""
	 "Hi,\nthere!"

       literal-string
       --------------
       'string' 	    string constant

       Note that single quotes are used.

       This string is taken as it is.  No backslashes  are  removed  or
       have  a	special meaning.  The only exception is that two quotes
       stand for one quote.

       Examples:

	 'All\slashes\are\saved.'
	 'This string contains doubled single quotes ''here'''

       option
       ------
       &option		     option value (local one is  preferred,  if
       exists)	&g:option	       global  option  value  &l:option
       local option value

       Examples:

	 echo 'Terminal size: '.&columns.'x'.&lines
	 if &columns > 100

       Any valid option name can be used here (note that "all" in ":set
       all" is a pseudo option).  See ":set options" section above.

       environment variable
       --------------------
       $VAR		     environment variable

       The  String  value  of any environment variable.  When it is not
       defined, the result is an empty string.

       Examples:

	 'This is my $PATH env: ' . $PATH
	 'vifmrc at ' . $MYVIFMRC . ' is used.'

       builtin variable
       --------------------
       v:var		     builtin variable

       Information exposed by vifm for use in scripting.

       1mv:count0m
	 count passed to : command, 0 by default.  Can be used in  map-
       pings to passthe count to a different command.
       1mv:count10m
	 same as v:count, but 1 by default.
       1mv:jobcount0m
	 number of active jobs (as can be seen in the :jobs menu).
       1mv:session0m
	 name of the current session or empty string.
       1mv:servername0m
	 See below.

       function call
       -------------
       function(expr1, ...)  function call

       See "Functions" section below.

       Examples:

	 "'" . filetype('.') . "'"
	 filetype('.') == 'reg'

       expression nesting
       ------------------
       (expr1)		     nested expression

       Groups  any  other  expression of arbitrary complexity enforcing
       order in which operators are applied.


1mFunctions0m
       USAGE		     RESULT	 DESCRIPTION

       chooseopt({opt})       String	   Queries  choose   parameters
       passed on startup.
       executable({expr})     Integer	  Checks whether {expr} command
       available.
       expand({expr})	     String	 Expands  special  keywords  in
       {expr}.
       extcached({cache}, {path}, {extcmd})
			     String	  Caches output of {extcmd} per
       {cache} and
					 {path} combination.
       filetype({fnum} [, {resolve}])
			     String	 Returns file type  from  posi-
       tion.
       fnameescape({expr})    String	   Escapes  {expr} for use in a
       :command.
       getpanetype()	     String	 Returns type of current  pane.
       has({property})	      Integer	   Checks  whether instance has
       {property}.
       layoutis({type})      Integer	 Checks whether  layout  is  of
       type {type}.
       paneisat({loc})	     Integer	 Checks whether current pane is
       at {loc}.
       system({command})     String	  Executes  shell  command  and
       returns its output.
       tabpagenr([{arg}])     Integer	   Returns number of current or
       last tab.
       term({command})	     String	 Like system(), but for  inter-
       active commands.

       1mchooseopt({opt})0m

       Retrieves values of options related to file choosing.  {opt} can
       be one of:
	   files       returns	argument  of  --choose-files  or  empty
       string
	   dir	      returns argument of --choose-dir or empty string
	   cmd	      returns argument of --on-choose or empty string
	   delimiter   returns	argument  of --delimiter or the default
       one (\n)

       1mexecutable({expr})0m

       If {expr} is absolute or relative path, checks whether path des-
       tination  exists  and  refers to an executable, otherwise checks
       whether command named {expr} is present in directories listed in
       $PATH.	Checks	for  various  executable extensions on Windows.
       Returns boolean value describing result of the check.

       Example:

	 " use custom default  viewer  script  if  it's  available  and
       installed
	 "  in	predefined  system  directory, otherwise try to find it
       elsewhere
	 if executable('/usr/local/bin/defviewer')
	     fileview * /usr/local/bin/defviewer %c
	 else
	     if executable('defviewer')
		 fileview * defviewer %c
	     endif
	 endif

       1mexpand({expr})0m

       Expands environment variables and macros  in  {expr}  just  like
       it's  done  for	command-line  commands.  Returns a string.  See
       "Command macros" section above.

       Examples:

	 " percent sign
	 :echo expand('%%')
	 " the last part of directory name of the other pane
	 :echo expand('%D:t')
	 " $PATH environment variable (same as `:echo $PATH`)
	 :echo expand('$PATH')

       1mextcached({cache}, {path}, {extcmd})0m

       Caches value of {extcmd} external command automatically updating
       it  as  necessary  based  on monitoring change date of a {path}.
       The cache is invalidated when file or its meta-data is  updated.
       A single path can have multiple caches associated with it.

       {path}  value  is  normalized,  but  symbolic links in it aren't
       resolved.

       Example:

	 " display number and size of blocks actually used by a file or
       directory
	 set statusline+=" Uses: %{ extcached('uses',
					     expand('%c'),
					     expand('stat	 --for-
       mat=%%bx%%B %c')) }"

       1mfiletype({fnum} [, {resolve}])0m

       The result is a string, which represents file type and is one of
       the list:
	   exe	   executables
	   reg	   regular files
	   link    symbolic links
	   broken  broken symbolic links (appears only when resolving)
	   dir	   directories
	   char    character devices
	   block   block devices
	   fifo    pipes
	   sock    *nix domain sockets
	   ?	   unknown file type (should not normally happen) or
		   non-file (pseudo-entries in compare view)

       The  result can also be an empty string in case of invalid argu-
       ment.

       Parameter {fnum} can have following values:
	   - '.' to get type of file under the	cursor	in  the  active
       pane
	   -  numerical  value	base 1 to get type of file on specified
       line number

       Optional parameter {resolve} is treated as a boolean and  speci-
       fies whether symbolic links should be resolved.

       1mfnameescape({expr})0m

       Escapes	parameter to make it suitable for use as an argument of
       a :command.  List of escaped characters	includes  %,  which  is
       doubled.

       Usage example:

	 " navigate to most recently modified file in current directory
	 execute 'goto' fnameescape(system('ls -t | head -1'))

       1mgetpanetype()0m

       Retrieves string describing  type  of  current  pane.   Possible
       return values:
	   regular	regular file listing of some directory
	   custom	custom file list (%u)
	   very-custom	very custom file list (%U)
	   tree 	tree view

       1mhas({property})0m

       Allows examining internal parameters from scripts to e.g. figure
       out environment in which application is running.  Returns  1  if
       property  is  true/present,  otherwise 0 is returned.  Currently
       the following properties are supported (anything else will yield
       0):
	   unix  runs in *nix-like environment (including Cygwin)
	   win	 runs on Windows

       Usage example:

	 " skip user/group on Windows
	 if !has('win')
	     let $RIGHTS = '%10u:%-7g '
	 endif

	 execute 'set' 'statusline="  %t%= %A '.$RIGHTS.'%15E %20d  "'

       1mlayoutis({type})0m

       Checks  whether current interface layout is {type} or not, where
       {type} can be:
	   only    single-pane mode
	   split   double-pane	mode  (either  vertical  or  horizontal
       split)
	   vsplit  vertical split (left and right panes)
	   hsplit  horizontal split (top and bottom panes)

       Usage example:

	 " automatically split vertically before enabling preview
	 :nnoremap w :if layoutis('only') | vsplit | endif | view!<cr>

       1mpaneisat({loc})0m

       Checks whether position of active pane in current layout matches
       one of the following locations:
	   top	   pane reaches top border
	   bottom  pane reaches bottom border
	   left    pane reaches left border
	   right   pane reaches right border

       1msystem({command})0m

       Runs the command in shell and returns its output  (joined  stan-
       dard  output  and standard error streams).  All trailing newline
       characters are stripped to allow easy appending to command  out-
       put.  Ctrl-C should interrupt the command.

       Use  this  function  to consume output of external commands that
       don't require user interaction and term() for  interactive  com-
       mands  that  make  use  of  terminal and are capable of handling
       stream redirection.

       Usage example:

	 " command to enter .git/ directory of git-repository (when ran
       inside one)
	 command! cdgit :execute 'cd' fnameescape(system('git rev-parse
       --git-dir'))

       1mtabpagenr([{arg}])0m

       When called without arguments returns number of current tab page
       base one.

       When  called  with "$" as an argument returns number of the last
       tab page base one, which is the same as number of tabs.

       1mterm({command})0m

       Same as system() function, but user interface is shutdown during
       the  execution  of  the	command, which makes sure that external
       interactive applications won't affect the way terminal  is  used
       by vifm.

       Usage example:

	 " command to change directory by picking it via fzf
	 command! fzfcd :execute 'cd'
				fnameescape(term('find -type d | fzf 2>
       /dev/tty'))

1mMenus and dialogs0m
       When navigating to some path from a menu there is  a  difference
       in  end location depending on whether path has trailing slash or
       not.  Files normally don't  have  trailing  slashes  so	"file/"
       won't  work  and one can only navigate to a file anyway.  On the
       other hand with directories there are two options: navigate to a
       directory  or  inside of it.  To allow both use cases, the first
       one is used on paths like "dir" and the second one for "dir/".

       1mCommands0m

       1m:range 22mnavigate to a menu line.

       1m:exi[t][!] :q[uit][!] :x[it][!]0m
	      leave menu mode.

       1m:noh[lsearch]0m
	      reset search match highlighting.

       1m:w[rite] {dest}0m
	      write all menu lines into file specified by {dest}.

       1mGeneral0m

       j, Ctrl-N - move down.
       k, Ctrl-P - move up.
       Enter, l - select and exit the menu.
       Ctrl-L - redraw the menu.

       Escape, Ctrl-C, ZZ, ZQ, q - quit.

       1mIn all menus0m

       The following set of keys has the  same	meaning  as  in  normal
       mode.

       Ctrl-B, Ctrl-F
       Ctrl-D, Ctrl-U
       Ctrl-E, Ctrl-Y
       /, ?
       n, N
       [count]G, [count]gg
       H, M, L
       zb, zt, zz

       zh - scroll menu items [count] characters to the right.
       zl - scroll menu items [count] characters to the left.
       zH  -  scroll  menu items half of screen width characters to the
       right.
       zL - scroll menu items half of screen width  characters	to  the
       left.

       :  -  enter command line mode for menus (currently only :exi[t],
       :q[uit], :x[it] and :{range} are supported).

       b - interpret content of the menu as list of paths and use it to
       create  custom  view  in  place	of previously active pane.  See
       "Custom views" section below.
       B - same as above, but creates unsorted view.

       v - load menu content into quickfix list of the editor (Vim com-
       patible	by assumption) or if list doesn't have separators after
       file names (colons) open each line as a file name.


       Below is description of	additional  commands  and  reaction  on
       selection in some menus and dialogs.

       1mApropos menu0m

       Selecting  menu	item  runs man on a given topic.  Menu won't be
       closed automatically to allow view several pages one by one.

       1mCommand-line mode abbreviations menu0m

       Type dd on an abbreviation to remove it.

       c leaves menu preserving file selection and  inserts  right-hand
       side of selected command into command-line.

       1mColor scheme menu0m

       Selecting  name	of a color scheme applies it the same way as if
       ":colorscheme <name>" was executed on the command-line.

       1mCommands menu0m

       Selecting command executes it with empty arguments (%a).

       dd on a command to remove.

       1mMarks menu0m

       Selecting mark navigates to it.

       dd on a mark to remove it.

       1mBookmarks menu0m

       Selecting a bookmark navigates to it.

       Type dd on a bookmark to remove it.

       gf and e also work to make it more convenient to bookmark files.

       1mTrash (:lstrash) menu0m

       r on a file name to restore it from trash.

       dd deletes file under the cursor.

       1mTrashes (:trashes) menu0m

       dd empties selected trash in background.

       1mDirectory history and Trashes menus0m

       Selecting  directory  name  will change directory of the current
       view as if :cd command was used.

       1mDirectory stack menu0m

       Selecting directory name  will  rotate  stack  to  put  selected
       directory pair at the top of the stack.

       1mFile (:file) menu0m

       Commands  from  vifmrc  or  typed  in command-line are displayed
       above empty line.  All commands below empty line are from .desk-
       top files.

       c  leaves  menu	preserving  file  selection and inserts command
       after :! in command-line mode.

       1mGrep, find, locate, bookmarks and user menu with navigation  (%M0m
       1mmacro)0m

       gf - navigate previously active view to currently selected item.
       Leaves menu mode except for grep menu.  Pressing Enter  key  has
       the same effect.

       e - open selected path in the editor, stays in menu mode.

       c  -  leave  menu preserving file selection and insert file name
       after :! in command-line mode.

       1mUser menu without navigation (%m macro)0m

       c leaves menu preserving file selection and inserts  whole  line
       after :! in command-line mode.

       1mGrep menu0m

       Selecting  file	(via  Enter or l key) opens it in editor set by
       'vicmd' at given line number.  Menu won't  be  closed  automati-
       cally to allow viewing more than one result.

       See above for "gf" and "e" keys description.

       1mCommand-line history menu0m

       Selecting  an  item  executes it as command-line command, search
       query or local filter.

       c leaves menu preserving file selection and  inserts  line  into
       command-line of appropriate kind.

       1mVolumes menu0m

       Selecting  a  drive navigates previously active pane to the root
       of that drive.

       1mFileinfo dialog0m

       Enter, q - close dialog

       1mSort dialog0m

       h, Space - switch ascending/descending.
       q - close dialog

       One shortcut per sorting key (see the dialog).

       1mAttributes (permissions or properties) dialog0m

       h, Space - check/uncheck.
       q - close dialog

       Item states:

       - * - checked flag.

       - X - means that it has different value for files in  selection.

       - d (*nix only) - (only for execute flags) means u-x+X, g-x+X or
	 o-x+X argument for the chmod program.	If you're not on  OS  X
	 and  want to remove execute permission bit from all files, but
	 preserve it for directories, set all execute flags to 'd'  and
	 check 'Set Recursively' flag.

       1mJobs menu0m

       dd  requests cancellation of job under cursor.  The job won't be
       removed from the list, but marked as being cancelled (if cancel-
       lation  was  successfully  requested).  A message will pop up if
       the job has already stopped.  Note that	on  Windows  cancelling
       external programs like this might not work, because their parent
       shell doesn't have any windows.

       e key displays errors of selected job  if  any  were  collected.
       They  are  displayed in a new menu, but you can get back to jobs
       menu by pressing h.


       1mUndolist menu0m

       r - reset undo position to group under the cursor.


       1mMedia menu0m

       Selecting a device either mounts (if it wasn't mounted  yet)  or
       navigates to its first mount point.

       Selecting a mount point navigates to it.

       Selecting "not mounted" line causes mounting.

       Selecting any other line does nothing.

       r - reload the list.

       m  -  mount/unmount device (cursor should be positioned on lines
       under device information).

       [ - put cursor on the previous device.

       ] - put cursor on the next device.


1mCustom views0m
       1mDefinition0m

       Normally file views contain list of files from a  single  direc-
       tory,  but  sometimes  it's useful to populate them with list of
       files that do not belong to the same directory,	which  is  what
       custom views are for.

       1mPresentation0m

       Custom  views are still related to directory they were in before
       custom list was loaded.	Path to that directory (original direc-
       tory) can be seen in the title of a custom view.

       Files  in  same	directory  have  to  be named differently, this
       doesn't hold for custom views thus seeing just file names  might
       be  rather confusing.  In order to give an idea where files come
       from and when possible, relative paths to original directory  of
       the view is displayed, otherwise full path is used instead.

       Custom views normally don't contain any inexistent files.

       1mNavigation0m

       Custom views have some differences related to navigation in reg-
       ular views.

       gf - acts similar to gf on symbolic links and navigates	to  the
       file at its real
	    location.

       h  -  go to closes parent node in tree view, otherwise return to
       the original directory.

       gh - return to the original directory.

       Opening ".." entry also causes return to the original directory.

       1mHistory0m

       Custom  list exists only while it's visible, once left one can't
       return to it, so there is no appearances of it in any history.

       1mFilters0m

       Only local filter affects content of the view.  This  is  inten-
       tional, presumably if one loads list, precisely that list should
       be displayed (except for inexistent paths, which are ignored).

       1mSearch0m

       Although directory names are visible in listing,  they  are  not
       searchable.   Only  file  names are taken into account (might be
       changed in future, searching whole  lines  seems  quite	reason-
       able).

       1mSorting0m

       Contrary  to  search sorting by name works on whole visible part
       of file path.

       1mHighlight0m

       Whole file name is highlighted as one entity, even if there  are
       directory elements.

       1mUpdates0m

       Reloads	can  occur,  though they are not automatic due to files
       being scattered among different places.	On a reload, inexistent
       files are removed and meta-data of all other files is updated.

       Once  custom  view  forgets about the file, it won't add it back
       even if it's created  again.   So  not  seeing  file  previously
       affected by an operation, which was undone is normal.

       1mOperations0m

       All  operations	that  add files are forbidden for custom views.
       For example, moving/copying/putting files  into	a  custom  view
       doesn't work, because it doesn't make much sense.

       On the other hand, operations that use files of a custom view as
       a source (e.g. yanking, copying, moving file from  custom  view,
       deletion) and operations that modify names are all allowed.

1mCompare views0m
       1mKinds0m

       :compare  can  produce four different results depending on argu-
       ments:
	- single compare view (ofone and either listall or listdups);
	- single custom view (ofone and listunique);
	- two compare views (ofboth and either listall or listdups);
	- two custom views (ofboth and listunique).

       The first two display files  of	one  file  system  tree.   Here
       duplicates  are	files  that  have at least one copy in the same
       tree.  The other two kinds of operation compare	two  trees,  in
       which duplicates are files that are found in both trees.

       Lists  of  unique  files  are  presented in custom views because
       there is no file grouping to preserve as all file ids are  guar-
       anteed to be distinct.

       1mCreation0m

       Arguments  passed to :compare form four categories each with its
       own prefix and is responsible for particular property of  opera-
       tion.

       Which files to compare:
	- ofboth - compares files of two panes against each other;
	- ofone  - compares files of the same directory.

       How files are compared:
	- byname     - by their name only;
	- bysize     - only by their size;
	-  bycontents  -  by data they contain (combination of size and
       hash of small chunk of contents is used as first  approximation,
       so don't worry too much about large files).

       Which files to display:
	- listall    - all files;
	- listunique - unique files only;
	- listdups   - only duplicated files.

       How results are grouped (has no effect if "ofone" specified):
	-  groupids    - files considered identical are always adjacent
       in output;
	- grouppaths - file system ordering  is  preferred  (this  also
       enables displaying identically named files as mismatches).

       Which files to omit:
	- skipempty - ignore empty files.

       Each  argument  can  appear multiple times, the rightmost one of
       the group is  considered.   Arguments  alter  default  behaviour
       instead of substituting it.

       1mExamples0m

       The defaults corresponds to probably the most common use case of
       comparing files in two trees with grouping by paths, so the fol-
       lowing are equivalent:

	 :compare
	 :compare bycontents grouppaths
	 :compare bycontents listall ofboth grouppaths

       Another use case is to find duplicates in the current sub-tree:

	 :compare listdups ofone

       The following command lists files that are unique to each pane:

	 :compare listunique

       1mLook0m

       The  view can't switch to ls-like view as it's unable to display
       diff-like data.

       Comparison views have second column displaying id of  the  file,
       files with same id are considered to be equal.  The view columns
       configuration is predefined.

       1mBehaviour0m

       When two views are being compared against each other the follow-
       ing changes to the regular behaviour apply:
	-  views  are  scrolled  synchronously	(as if 'scrollbind' was
       set);
	- views' cursors are synchronized;
	- local filtering is disabled (its results wouldn't be meaning-
       ful);
	-  zd  excludes  groups  of adjacent identical files, 1zd gives
       usual behaviour;
	- sorting is permanently disabled (ordering is fixed);
	- removed files hide their counter pairs;
	- exiting one of the views terminates the other immediately;
	- renaming files isn't blocked, but isn't  taken  into	account
       and might require regeneration of comparison;
	-  entries which indicate absence of equivalent file have empty
       names and can be matched as such;
	- when unique files of both views are listed custom  views  can
       be empty, this absence of unique files is stated clearly.

       One compare view has similar properties (those that are applica-
       ble for single pane).

       Files are gathered in this way:
	- recursively starting at current location of the view;
	- dot files are excluded if view hides them at	the  moment  of
       comparison;
	- directories are not taken into account;
	- symbolic links to directories are ignored.

1mStartup0m
       On  startup vifm determines several variables that are used dur-
       ing execution.  They are determined in  the  order  they  appear
       below.

       On  *nix  systems  $HOME is normally present and used as is.  On
       Windows systems vifm tries to find correct home directory in the
       following order:
	- $HOME variable;
	- $USERPROFILE variable (on Windows only);
	-  a combination of $HOMEDRIVE and $HOMEPATH variables (on Win-
       dows only).

       vifm tries to find correct configuration directory  by  checking
       the following places:
	- $VIFM variable;
	- parent directory of the executable file (on Windows only);
	- $HOME/.vifm directory;
	- $APPDATA/Vifm directory (on Windows only);
	- $XDG_CONFIG_HOME/vifm directory;
	- $HOME/.config/vifm directory.

       vifm  tries  to	find correct configuration file by checking the
       following places:
	- $MYVIFMRC variable;
	- vifmrc in parent directory of the executable file (on Windows
       only);
	- $VIFM/vifmrc file.

1mConfigure0m
       See  "Startup"  section	above for the explanations on $VIFM and
       $MYVIFMRC.

       The vifmrc file contains commands that will be executed on  vifm
       startup.   There  are  two such files: global and local.  Global
       one  is	at  {prefix}/etc/vifm/vifmrc,  see  $MYVIFMRC  variable
       description  for the search algorithm used to find local vifmrc.
       Global vifmrc is loaded before the local one, so that the  later
       one can redefine anything configured globally.

       Use  vifmrc  to	set  settings, mappings, filetypes etc.  To use
       multi line commands precede each next line with a slash	(white-
       space  before slash is ignored, but all spaces at the end of the
       lines are saved).  For example:

	 set
	     \smartcase

       equals "setsmartcase".  When

	 set<space here>
	     \ smartcase

       equals "set  smartcase".

       The $VIFM/vifminfo file contains generic state of  the  applica-
       tion.   You  can  control  what is stored in vifminfo by setting
       'vifminfo' option.  Vifm always writes this file on exit  unless
       'vifminfo'  option is empty.  Marks, bookmarks, commands, histo-
       ries, filetypes, fileviewers  and  registers  in  the  file  are
       merged with vifm configuration (which has bigger priority).

       Generally,  runtime  configuration  has	bigger	priority during
       merging, but there are some exceptions:

	 - directory stack stored in the file is not overwritten unless
	   something is changed in vifm instance that performs merge;

	 - each  mark  or  bookmark is marked with a timestamp, so that
	   newer value is not overwritten by older one, thus no  matter
	   from where it comes, the newer one wins;

	 - all	histories  are	marked with timestamps on storing, this
	   means that last instance to quit puts its elements on top of
	   the list;

	 - tabs  are  merged  only  if both current instance and stored
	   state contain exactly one tab of any kind.

       The $VIFM/scripts directory can	contain  shell	scripts.   vifm
       modifies  its  PATH  environment  variable to let user run those
       scripts without specifying full path.  All subdirectories of the
       $VIFM/scripts  will be added to PATH too.  Script in a subdirec-
       tory overlaps script with the same name in all its parent direc-
       tories.

       The $VIFM/colors/ and {prefix}/etc/vifm/colors/ directories con-
       tain color schemes.  Available color  schemes  are  searched  in
       that order, so on name conflict the one in $VIFM/colors/ wins.

       Each  color  scheme  should have ".vifm" extension.  This wasn't
       the case before and for this reason the	following  rules  apply
       during lookup:

	 - if  there is no file with .vifm extension, all regular files
	   are listed;

	 - otherwise only files with .vifm extension are  listed  (with
	   the extension being truncated).

1mSessions0m
       Sessions  provide a way to have multiple persistent runtime con-
       figurations.  Think of them as second-level  vifminfo  files  in
       addition  to the first-level one used by all sessions.  In other
       words, they aren't a replacement for vifminfo file  that  exists
       without	sessions,  but	an  addition  to  it.	One  can  empty
       'vifminfo' option and rely solely on sessions, but  in  practice
       one  might want to share some state among instances in different
       sessions or have an "out-of-sessions" state for tasks that don't
       deserve a session of their own.

       This  leads to a two-level structure where data in session files
       has higher priority than data  in  vifminfo  files  (where  this
       makes  sense)  following the same rules that merging of vifminfo
       file obeys.  In addition to that,  history  items  from	session
       files are never ordered before history items from vifminfo file.

       1mFormat0m

       Sessions have the format of vifminfo files, they do not	consist
       of  sequence  of  command-line  commands and are not meant to be
       sourced via :source command.

       1mStorage and naming0m

       `$VIFM/sessions/` directory serves as a	storage  for  sessions.
       Consequently  names should be valid filenames.  The structure of
       the storage is flat meaning that there  are  no	subdirectories,
       that's why names of sessions can't contain slashes.

       1mUsage model0m

       Contrary  to  Vim,  vifm automates basic management of sessions.
       You can start, switch, stop or delete a	session  using	builtin
       means.

       Current	session is saved at the same time vifminfo is saved (on
       normal exits or explicitly on :write command) and  right  before
       switching  to  another  session.  To avoid saving in those cases
       use :session command to detach (without saving) from  a	session
       before proceeding.

       1mRelated topics0m

       Commands: :session, :delsession
       Options: 'sessionoptions'
       Variables: v:session

1mAutomatic FUSE mounts0m
       vifm has a builtin support of automated FUSE file system mounts.
       It is implemented using file associations mechanism.  To  enable
       automated mounts, one needs to use a specially formatted program
       line in filetype  or  filextype	commands.   These  use	special
       macros,	which differ from macros in commands unrelated to FUSE.
       Currently three formats are supported:

       1) FUSE_MOUNT This format should be used in case when all infor-
       mation needed for mounting all files of a particular type is the
       same.  E.g. mounting of tar files don't require	any  file  spe-
       cific options.

       Format line:
	 FUSE_MOUNT|mounter %SOURCE_FILE %DESTINATION_DIR [%FOREGROUND]

       Example filetype command:

	 :filetype FUSE_MOUNT|fuse-zip %SOURCE_FILE %DESTINATION_DIR

       2) FUSE_MOUNT2 This format allows one to use specially formatted
       files  to  perform  mounting and is useful for mounting remotes,
       for example remote file systems over ftp or ssh.

       Format line:
	 FUSE_MOUNT2|mounter %PARAM %DESTINATION_DIR [%FOREGROUND]

       Example filetype command:

	 :filetype *.ssh FUSE_MOUNT2|sshfs %PARAM %DESTINATION_DIR

       Example file content:

	 root@127.0.0.1:/

       3) FUSE_MOUNT3

       This format is equivalent to FUSE_MOUNT, but  omits  unmounting.
       It  is useful for cases, when unmounting isn't needed, like when
       using AVFS.

       Example :filetype command:

	 :filetype
       *.tar,*.tar.bz2,*.tbz2,*.tgz,*.tar.gz,*.tar.xz,*.txz,*.deb
	      \ {Mount with avfs}
	      \ FUSE_MOUNT3|mount-avfs %DESTINATION_DIR %SOURCE_FILE

       Example `mount-avfs` helper script:

	 #!/bin/sh

	 dest=$1
	 file=$2

	 rmdir "$dest"
	 ln -s "$HOME/.avfs$file#/" "$dest"

       All  %  macros are expanded by vifm at runtime and have the fol-
       lowing meaning:
	 - %SOURCE_FILE is replaced by full path to selected file;
	 - %DESTINATION_DIR is replaced by full path  to  mount  direc-
       tory, which is created by vifm basing on the value of 'fusehome'
       option;
	 - %PARAM value is filled from the first line  of  file  (whole
       line), though in the future it can be changed to whole file con-
       tent;
	 - %FOREGROUND means that you want to run mount  command  as  a
       regular command (required to be able to provide input for commu-
       nication with mounter in interactive way).

       %FOREGROUND is an optional macro.  Other macros are  not  manda-
       tory, but mount commands likely won't work without them.

       %CLEAR  is  obsolete  name  of  %FOREGROUND, which is still sup-
       ported, but might be removed in future.	Its use is discouraged.

       Unlike  macros  elsewhere,  these  are  recognized  only if they
       appear at the end of a command  or  are	followed  by  a  space.
       There  is no way to escape % either.  These are historical limi-
       tations, which might be addressed in the future.

       The mounted FUSE file systems will be automatically unmounted in
       two cases:

	 - when  vifm  quits  (with ZZ, :q, etc. or when killed by sig-
	   nal);

	 - when you explicitly leave mount point going up to its parent
	   directory  (with  h,  Enter	on "../" or ":cd ..") and other
	   pane is not in the same directory or its child  directories.

1mView look0m
       vifm  supports  displaying  of  file  list view in two different
       ways:

	 - in a table mode, when multiple  columns  can  be  set  using
	   'viewcolumns'  option  (see	"Column view" section below for
	   details);

	 - in a multicolumn list manner which looks almost like `ls -x`
	   command   output  (see  "ls-like  view"  section  below  for
	   details).

       The look is local for each view and can be  chosen  by  changing
       value of the 'lsview' boolean option.

       Depending  on  view  look  some	of keys change their meaning to
       allow more natural cursor moving.  This concerns mainly h, j, k,
       l and other similar navigation keys.

       Also  some  of  options can be ignored if they don't affect view
       displaying in selected look.  For example value of 'viewcolumns'
       when 'lsview' is set.

1mls-like view0m
       When  this  view  look is enabled by setting 'lsview' option on,
       vifm will display files in multiple columns.  Number of	columns
       depends	on  the length of the longest file name present in cur-
       rent directory of the view.  Whole file	list  is  automatically
       reflowed on directory change, terminal or view resize.

       View  looks  close  to  output  of `ls -x` command, so files are
       listed left to right in rows.

       In this mode file manipulation  commands  (e.g.	d)  don't  work
       line-wise  like	they  do in Vim, since such operations would be
       uncommon for file manipulation tasks.   Thus,  for  example,  dd
       will remove only current file.

       By  default the view is filled by lines, 'lsoptions' can be used
       to get filling by columns.

       Note that tree-view and compare view inhibit ls-like view.

1mColumn view0m
       View columns are described by a comma-separated list  of  column
       descriptions, each of which has the following format
	   [ '-' ] [ fw ( [ '.' tw ] | '%' ) ] '{' type '}' '.'{0,3}
       where fw stands for full width and tw stands for text width.

       So it basically consists of four parts:
	1. Optional alignment specifier
	2. Optional width specifier
	3. Mandatory column name
	4. Optional cropping specifier

       1mAlignment specifier0m

       It's  an  optional minus or asterisk sign as the first symbol of
       the string.

       Specifies type of text alignment within a column.   Three  types
       are supported:

       - left align

	   set viewcolumns=-{name}

       - right align (default)

	   set viewcolumns={name}

       - dynamic align

	 It's like left alignment, but when the text is bigger than the
	 column, the alignment is made at the right (so the part of the
	 field is always visible).

	   set viewcolumns=*{name}

       1mWidth specifier0m

       It's  a	number	followed by a percent sign, two numbers (second
       one should be less than or equal to  the  first	one)  separated
       with a dot or a single number.

       Specifies  column  width  and  its  units.  There are three size
       types:

       - absolute size - column width is specified in characters

	   set viewcolumns=-100{name},20.15{ext}

	 results in two columns with  lengths  of  100	and  20  and  a
	 reserved  space  of five characters on the left of second col-
	 umn.

       - relative (percent) size - column width is  specified  in  per-
	 cents of view width

	   set viewcolumns=-80%{name},15%{ext},5%{mtime}

	 results  in  three  columns with lengths of 80/100, 15/100 and
	 5/100 of view width.

       - auto size (default) - column width is automatically determined

	   set viewcolumns=-{name},{ext},{mtime}

	 results  in  three  columns  with  length of one third of view
	 width. There is no size adjustment to content, since  it  will
	 slow down rendering.

       Columns	of  different  sizing  types can be freely mixed in one
       view. Though sometimes some of columns can be seen partly or  be
       completely  invisible  if  there  is not enough space to display
       them.

       1mColumn name0m

       This is just a sort key surrounded with curly braces or	{root},
       e.g.

	 {name},{ext},{mtime}

       {name}  and  {iname} keys are the same and present both for con-
       sistency with 'sort' option.

       Following keys don't have corresponding sorting keys:

	 - {root}     - display name without extension (as a complement
	   for {ext})

	 - {fileroot}  -  display  name  without extension for anything
	   except for directories and symbolic links to directories (as
	   a complement for {fileext})

       Empty  curly braces ({}) are replaced with the default secondary
       column for primary sort key. So after the next command view will
       be  displayed  almost  as  if 'viewcolumns' is empty, but adding
       ellipsis for long file names:

	 set viewcolumns=-{name}..,6{}.

       1mCropping specifier0m

       It's from one to three dots after closing curly brace in  column
       format.

       Specifies  type of text truncation if it doesn't fit in the col-
       umn.  Currently three types are supported:

	 - truncation - text is truncated

	     set viewcolumns=-{name}.

	   results in truncation of names that are too long too fit  in
	   the view.

	 - adding of ellipsis - ellipsis on the left or right are added
	   when needed

	     set viewcolumns=-{name}..

	   results in that ellipsis are added at the end  of  too  long
	   file names.

	 - none (default) - text can pass column boundaries

	     set viewcolumns=-{name}...,{ext}

	   results  in that long file names can partially be written on
	   the ext column.

1mColor schemes0m
       The color schemes in vifm can be applied in two different ways:

	 - as the primary color scheme;

	 - as local to a pane color scheme.

       Both types are set using :colorscheme command, but of  different
       forms:

	 - :colorscheme  color_scheme_name  -  for  the  primary  color
	   scheme;

	 - :colorscheme color_scheme_name directory - for  local  color
	   schemes.

       Look  of  different  parts  of  the TUI (Text User Interface) is
       determined in this way:

	 - Border, TabLine, TabLineSel, TopLineSel,  TopLine,  CmdLine,
	   ErrorMsg,  StatusLine,  JobLine, SuggestBox and WildMenu are
	   always determined by the primary color scheme;

	 - CurrLine, Selected,	Directory,  Link,  BrokenLink,	Socket,
	   Device,  Executable, Fifo, CmpMismatch, Win, AuxWin and Oth-
	   erWin are determined by primary color scheme and  a	set  of
	   local color schemes, which can be empty.

       There  might  be  a  set of local color schemes because they are
       structured hierarchically according to  file  system  structure.
       For example, having the following piece of file system:

	 ~
	 `-- bin
	    |
	    `-- my

       Two color schemes:

	 # ~/.vifm/colors/for_bin
	 highlight Win cterm=none ctermfg=white ctermbg=red
	 highlight CurrLine cterm=none ctermfg=red ctermbg=black

	 # ~/.vifm/colors/for_bin_my
	 highlight CurrLine cterm=none ctermfg=green ctermbg=black

       And these three commands in the vifmrc file:

	 colorscheme Default
	 colorscheme for_bin ~/bin
	 colorscheme for_bin_my ~/bin/my

       File list will look in the following way for each level:

       - ~/ - Default color scheme
	 black background
	 cursor with blue background

       - ~/bin/ - mix of Default and for_bin color schemes
	 red background
	 cursor with black background and red foreground

       - ~/bin/my/  -  mix  of	Default,  for_bin  and for_bin_my color
	 schemes
	 red background
	 cursor with black background and green foreground

1mTrash directory0m
       vifm has support of trash directory, which is used as  temporary
       storage	for  deleted files or files that were cut.  Using trash
       is controlled by the 'trash' option, and exact path to the trash
       can be set with 'trashdir' option.  Trash directory in vifm dif-
       fers from the system-wide one by default,  because  of  possible
       incompatibilities  of storing deleted files among different file
       managers.  But one can set 'trashdir' to  "~/.local/share/Trash"
       to use a "standard" trash directory.

       There are two scenarios of using trash in vifm:

	 1. As	a  place for storing files that were cut by "d" and may
	    be inserted to some other place in file system.

	 2. As a storage of files, that are deleted but not purged yet.

       The  first  scenario uses deletion ("d") operations to put files
       to trash and put ("p") operations to restore  files  from  trash
       directory.   Note  that	such  operations move files to and from
       trash directory, which can be long term operations  in  case  of
       different partitions or remote drives mounted locally.

       The  second  scenario  uses deletion ("d") operations for moving
       files to trash directory  and  :empty  command-line  command  to
       purge all previously deleted files.

       Deletion and put operations depend on registers, which can point
       to files in trash directory.  Normally, there are no nonexistent
       files in registers, but vifm doesn't keep track of modifications
       under trash directory, so one shouldn't expect value  of  regis-
       ters  to  be  absolutely correct if trash directory was modified
       not by operation that are meant for it.	But this won't lead  to
       any issues with operations, since they ignore nonexistent files.

1mClient-Server0m
       vifm supports remote execution of  command-line	mode  commands,
       remote  changing of directories and expression evaluation.  This
       is possible using --remote and --remote-expr command-line  argu-
       ments.

       To  execute a command remotely combine --remote argument with -c
       <command> or +<command>.  For example:

	 vifm --remote -c 'cd /'
	 vifm --remote '+cd /'

       To change directory not using command-line mode commands one can
       specify paths right after --remote argument, like this:

	 vifm --remote /
	 vifm --remote ~
	 vifm --remote /usr/bin /tmp

       Evaluating expression remotely might be useful to query informa-
       tion about an instance, for example its location:

	 vifm --remote-expr 'expand("%d")'

       If there are several running instances, the target can be speci-
       fied with --server-name option (otherwise, the first one lexico-
       graphically is used):

	 vifm --server-name work --remote ~/work/project

       List  of  names	of  running  instances	can  be  obtained   via
       --server-list  option.  Name of the current one is available via
       v:servername.


       1mv:servername0m
	      server name of  the  running  vifm  instance.   Empty  if
	      client-server feature is disabled.

1mPlugin0m
       Plugin for using vifm in vim as a file selector.

       Commands:

	 :EditVifm    select  a  file  or  files to open in the current
       buffer.
	 :Vifm	     alias for :EditVifm.
	 :SplitVifm  split buffer and select a file or files to open.
	 :VsplitVifm vertically split buffer and select a file or files
       to open.
	 :DiffVifm    select  a file or files to compare to the current
       file with
		     :vert diffsplit.
	 :TabVifm    select a file or files to open in tabs.

       Each command accepts up to two arguments:  left	pane  directory
       and  right  pane  directory.   After arguments are checked, vifm
       process is spawned in a special	"file-picker"  mode.   To  pick
       files  just  open them either by pressing l, i or Enter keys, or
       by running :edit command.  If no files are selected, file  under
       the cursor is opened, otherwise whole selection is passed to the
       plugin and opened in vim.

       The plugin have only two settings.  It's a string variable named
       g:vifm_term to let user specify command to run GUI terminal.  By
       default it's equal to 'xterm -e'.  And another  string  variable
       named  g:vifm_exec, which equals "vifm" by default and specifies
       path to vifm's  executable.   To  pass  arguments  to  vifm  use
       g:vifm_exec_args, which is empty by default.

       To  use	the  plugin copy the vifm.vim file to either the system
       wide vim/plugin directory or into ~/.vim/plugin.

       If you would prefer not to use the plugin and it is in the  sys-
       tem wide plugin directory add

       let loaded_vifm=1

       to your ~/.vimrc file.

1mReserved0m
       The  following  command names are reserved and shouldn't be used
       for user commands.

	 g[lobal]
	 v[global]

1mENVIRONMENT0m
       1mVIFM	22mPoints   to	 main	configuration	directory   (usually
	      ~/.vifm/).

       1mMYVIFMRC0m
	      Points	to    main    configuration    file    (usually
	      ~/.vifm/vifmrc).

       These environment variables are valid inside vifm and  also  can
       be  used  to configure it by setting some of them before running
       vifm.

       When $MYVIFMRC isn't set, it's made as  $VIFM/vifmrc  (exception
       for Windows: vifmrc in the same directory as vifm.exe has higher
       priority than $VIFM/vifmrc).

       See "Startup" section above for more details.

       1mVIFM_FUSE_FILE0m
	      On execution of external commands this variable is set to
	      the  full path of file used to initiate FUSE mount of the
	      closest mount point from	current  pane's  directory  up.
	      It's not set when outside FUSE mount point.  When vifm is
	      used inside terminal multiplexer, it tries  to  set  this
	      variable as well (it doesn't work this way on its own).

1mSEE ALSO0m
       1mvifm-convert-dircolors22m(1), 1mvifm-pause22m(1)

       Website: https://vifm.info/
       Wiki: https://wiki.vifm.info/

       Esperanto translation of the documentation by Sebastian Cyprych:
       http://cyprych.neostrada.pl/tekstoj/komputiloj/vifm-help.eo.html

1mAUTHOR0m
       Vifm was written by ksteen <ksteen@users.sourceforge.net>
       And currently is developed by xaizek <xaizek@posteo.net>



vifm 0.11		      September 24, 2020		       VIFM(1)
