Radius(3)

DESCRIPTION
   This module defines the "radius" type and functions, for use
   in Ball arithmetic. (See the Math::MPC::Ball documentation for
   information on Ball arithmetic.)
   It needs the mpc-1.3.0 library, or later.

   If building against mpc-1.2.x (or earlier) this module will be
   effectively ignored. There are no actions that need to be taken.

   The following documentation is essentially a copy of the official
   mpc documentation. The Rmpcr_* functions are generally functions
   that simply wrap the mpc library's matching mpcr_* function.
   However, there are some Rmpcr_* functions (eg Rmpcr_split) that
   are functions "in their own right", without any "mpcr_*"
   counterpart.

   The radius type (mpcr_t) is defined by
   struct {
      int64_t mant;
      int64_t exp;
   }
   It can contain the special values infinity or zero, or floating
   point numbers encoded as mant * (2 ** exp) for a positive mant and an
   arbitrary (usually negative) exponent exp.  Normalised finite radii
   use 31 bits for the mantissa  - ie (2 ** 30) <= mant <= (2 ** 30) - 1.
   The special values infinity and 0 are encoded through the sign of
   m, but should be tested for and set using the dedicated functions.

   Unless indicated otherwise, the following functions assume radius
   arguments to be normalised, they return normalised results, and they
   round their results up, not necessarily to the smallest representable
   number, although reasonable effort is made to get a tight upper bound:
   They only guarantee that their outputs are an upper bound on the true
   results.  (There may be a trade-off between tightness of the result
   and speed of computation.  For instance, when a 32-bit mantissa is
   normalised, an even mantissa should be divided by 2, an odd mantissa
   should be divided by 2 and 1 should be added, and then in both cases
   the exponent must be increased by 1.  It might be more efficient to
   add 1 all the time instead of testing the last bit of the mantissa.)

FUNCTIONS
   In this documentation:
    Arguments "$op" and "$rop" denote Math::MPC::Radius (mpcr_ptr)
    object, with "$op" being an argument, and "$rop" being the
    object that receives the value, returned by the function.
    "$fh" is a specified stream - eg stdout or sderr or a filehandle.
    "$ui64" is a perl integer scalar that will be cast to uint64_t.
    "$si64" is a perl integer scalar that will be cast to 'int64_t'.
    "$i" is a perl integer type containing a 'signed int' value.
    "$si" is a perl integer type containing a 'signed long int' value.
    "$ui" is a perl integer type containing an 'unsigned long int' value.
    "$iv" is a perl signed scalar IV.
    "$uv" is a perl unsigned scalar UV.
    "$str" is a string - ie a perl scalar PV.

   $rop = Rmpcr_init();
   $rop = Rmpcr_init_nobless();
    Create a Math::MPC::Radius object with a value of zero.
    Creating the object using the "nobless" variant results in an object
    that has not been blessed into the Math::MPC::Radius package. This is
    generally NOT what is wanted as it puts the burden of freeing
    allocated memory onto the user by calling Rmpcr_clear($rop) at the
    appropriate time.

   Rmpcr_clear($rop);
    Free the memory associated with $rop.
    Use this only if $rop was initialized using Rmpcr_init_nobless().
    If $rop was initialized with Rmpcr_init(), then perl will free the
    memory as soon as is appropriate.

   $i = Rmpcr_inf_p ($op);
   $i = Rmpcr_zero_p ($op);
    Test whether $op is infinity or zero, respectively, and return a
    boolean.

   $i = Rmpcr_lt_half_p ($op);
    Return 'true' if $op <  1/2, and 'false' otherwise.

   $i = Rmpcr_cmp ($op1, $op2);
    Return +1, 0 or -1 depending on whether $op1 is larger than, equal to
    or less than $op2, with the natural total order on the compactified
    non-negative real axis letting 0 be smaller and letting infinity be
    larger than any finite real number.

   Rmpcr_set_inf ($rop);
   Rmpcr_set_zero ($rop);
   Rmpcr_set_one ($rop);
   Rmpcr_set ($rop, $op);
   Rmpcr_set_ui64_2si64 ($rop, $ui64, $si64);
    Set $rop to infinity, zero, 1, $op or $ui64 * (2 ** $si64),
    respectively.

   Rmpcr_set_str_2str ($rop, $str1, $str2);
    A replacement for Rmpcr_set_ui64_2si64 on perls whose IV size < 8.
    The 64-bit values can be represented as Decimal integer strings,
    with $rop being set to $str1 * (2 ** $str2).

   Rmpcr_max ($rop, $op1, $op2);
    Set $rop to the maximum of $op1 and $op2.

   $iv = Rmpcr_get_exp ($op);
    Assuming that $op is neither infinity nor 0, return its exponent
    $iv, such that $op == m * (2 ** $iv), with 1/2 <= m < 1.
    This function's behaviour is undefined when $op is either Inf or 0.
    If perl's ivsize is less than 8 bytes and the returned value will
    overflow the IV, then the function croaks with a message
    recommending that Rmpcr_get_exp_mpfr (below) be used instead.

   $mpfr = Rmpcr_get_exp_mpfr($op); # $mpfr is a 64-bit precision
                                    # Math::MPFR object.
    As for Rmpcr_get_exp (above), except that it returns the 64-bit
    integer value as a 64-bit precision Math::MPFR object. This avoids
    the problem of having 64-bit values overflow the 4-byte IV.

   @parts = Rmpcr_split($op);
    If $op is zero, @parts is a one-element array, containing the UV 0.
    If $op is Inf, @parts is a one-element array, containing the string
    "Inf".
    Otherwise, @parts is a two-element array. The first element is a UV
    holding the value of the mantissa of $op, and the second element is
    an IV holding the value of the exponent of $op.
    $op then represents the "radius" value $parts[0] * (2 ** $parts[1]).
    This function will croak if perl's ivsize is 4 and the value of the
    mantissa or the exponent overflows the 4-byte IV. In such a case,
    the message recommends using Rmpcr_split_mpfr (below) instead.

   @parts = Rmpcr_split_mpfr($op);
    NOTE: Provided for the benefit of those perls whose ivsize is 4, but
          can be used with all perls, irrespective of their IVSIZE.
    The same as Rmpcr_split except that, where Rmpcr_split returns an IV
    or UV, Rmpcr_split_mpfr returns the same value in the form of a
    Math::MPFR object with 64-bit precision. This avoids the problem of
    having 64-bit values overflow the 4-byte IV or UV.

   Rmpcr_out_str ($fh, $op);
   Rmpcr_print($op);
   Rmpcr_say($op);
    Rmpcr_out_str outputs $op on $fh, which may be *stdout.
    Rmpcr_print and Rmpcr_say print to *stdout, with Rmpcr_say adding
    a newline - as with perl's say() function.
    Caveat: These functions so far serve mainly for debugging purposes.
            Their output format changed after the release of mpc-1.3.1,
            and might yet might change again in the future.

   Rmpcr_out_str_win($fh, $op); # Available on MS Windows only
   Rmpcr_print_win($op);        # Available on MS Windows only
   Rmpcr_say_win($op);          # Available on MS Windows only
    If the MPC library is at a version later than 1.3.1 then these
    functions serve no useful purpose, and produce the same output
    as Rpmcr_out_str, Rmpcr_print and Rmpcr_say.
    Otherwise, they are the same as Rpmcr_out_str, Rmpcr_print and
    Rmpcr_say, except that they temporarily activate codepage 65001.
    Without this, on MS Windows the functions will present the
    plus-or-minus and infinity symbols in a garbled form if the output
    is being sent to STDOUT or STDERR.
    If Rmpcr_out_str is sending the output to a file, then it should
    work just fine on MS Windows.

   Rmpcr_add ($rop, $op1, $op2);
   Rmpcr_sub ($rop, $op1, $op2);
   Rmpcr_mul ($rop, $op1, $op2);
   Rmpcr_div ($rop, $op1, $op2);
   Rmpcr_mul_2ui ($rop, $op, $ui);
   Rmpcr_div_2ui ($rop, $op, $ui);
   Rmpcr_sqr ($rop, $op);
   Rmpcr_sqrt ($rop, $op);
    Set rop to the sum, difference, product or quotient of $op1 and $op2,
    or to $op * (2 ** $ui) or to $p / (2 ** $ui), or to the square or the
    square root of $op.  If any of the arguments is infinity, or if a
    difference is negative, the result is infinity.

   Rmpcr_sub_rnd ($rop, $op1, $op2, $round); # $round is a Math::MPFR
                                             # rounding value
    Set $op to the difference of $op1 and $op2, rounded according to
    $round, which can be one of 'MPFR_RNDU' or 'MPFR_RNDD'.  If one of
    the arguments is infinity or the difference is negative, the result
    is infinity.  Calling the function with 'MPFR_RNDU' is equivalent to
    calling 'Rmpcr_sub'.
    This is one out of several functions taking a rounding parameter.
    Rounding down may be useful to obtain an upper bound when dividing
    by the result.

   Rmpcr_c_abs_rnd ($rop, $mpc, $round); # $mpc is a Math::MPC object.
                                      # $round is a Math::MPFR rounding
                                      # value
    Set $rop to the absolute value of the complex number $mpc, rounded
    in the direction $round, which may be one of 'MPFR_RNDU' or
    'MPFR_RNDD'.

   Rmpcr_add_rounding_error ($rop, $uv, $round); # $round is a Math::MPFR
                                                 # rounding value
    Set $rop to $rop + ((1 + $rop) * (2 ** - $uv)) if $round equals
   'MPFR_RNDN', else to $rop + ((1 + $rop) * (2 ** (1- $uv))) . The idea is
    that if a (potentially not representable) centre of an ideal complex
    ball of radius $rop is rounded to a representable complex number at
    precision $uv, this shifts the centre by up to 1/2 ulp (for rounding to
    nearest) or 1ulp (for directed rounding of at least one of the real
    or imaginary parts), which increases the radius accordingly.  So this
    function is typically called internally at the end of each operation
    with complex balls to account for the error made by rounding the centre.

LICENSE
    This program is free software; you may redistribute it and/or
    modify it under the same terms as Perl itself.
    Copyright 2022 Sisyphus

AUTHOR
    Sisyphus <sisyphus at(@) cpan dot (.) org>