devicehandler.cpp Example File | Qt Bluetooth 5.9

Qt 5.9 | Qt Bluetooth | Bluetooth Low Energy Heart Rate Game | devicehandler.cpp Example File

Qt 5.9.9 Reference Documentation

# devicehandler.cpp Example File

heartrate-game/devicehandler.cpp

      /***************************************************************************
      **
      ** Copyright (C) 2017 The Qt Company Ltd.
      ** Contact: https://www.qt.io/licensing/
      **
      ** This file is part of the examples of the QtBluetooth module of the Qt Toolkit.
      **
      ** $QT_BEGIN_LICENSE:BSD$
      ** Commercial License Usage
      ** Licensees holding valid commercial Qt licenses may use this file in
      ** accordance with the commercial license agreement provided with the
      ** Software or, alternatively, in accordance with the terms contained in
      ** a written agreement between you and The Qt Company. For licensing terms
      ** and conditions see https://www.qt.io/terms-conditions. For further
      ** information use the contact form at https://www.qt.io/contact-us.
      **
      ** BSD License Usage
      ** Alternatively, you may use this file under the terms of the BSD license
      ** as follows:
      **
      ** "Redistribution and use in source and binary forms, with or without
      ** modification, are permitted provided that the following conditions are
      ** met:
      **   * Redistributions of source code must retain the above copyright
      **     notice, this list of conditions and the following disclaimer.
      **   * Redistributions in binary form must reproduce the above copyright
      **     notice, this list of conditions and the following disclaimer in
      **     the documentation and/or other materials provided with the
      **     distribution.
      **   * Neither the name of The Qt Company Ltd nor the names of its
      **     contributors may be used to endorse or promote products derived
      **     from this software without specific prior written permission.
      **
      **
      ** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
      ** "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
      ** LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
      ** A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
      ** OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
      ** SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
      ** LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
      ** DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
      ** THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
      ** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
      ** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE."
      **
      ** $QT_END_LICENSE$
      **
      ****************************************************************************/

      #include "heartrate-global.h"
      #include "devicehandler.h"
      #include "deviceinfo.h"
      #include <QtEndian>

      DeviceHandler::DeviceHandler(QObject *parent) :
          BluetoothBaseClass(parent),
          m_control(0),
          m_service(0),
          m_currentDevice(0),
          m_foundHeartRateService(false),
          m_measuring(false),
          m_currentValue(0),
          m_min(0), m_max(0), m_sum(0), m_avg(0), m_calories(0)
      {
      #ifdef SIMULATOR
          m_demoTimer.setSingleShot(false);
          m_demoTimer.setInterval(2000);
          connect(&m_demoTimer, &QTimer::timeout, this, &DeviceHandler::updateDemoHR);
          m_demoTimer.start();
          updateDemoHR();
      #endif
      }

      void DeviceHandler::setAddressType(AddressType type)
      {
          switch (type) {
          case DeviceHandler::AddressType::PublicAddress:
              m_addressType = QLowEnergyController::PublicAddress;
              break;
          case DeviceHandler::AddressType::RandomAddress:
              m_addressType = QLowEnergyController::RandomAddress;
              break;
          }
      }

      DeviceHandler::AddressType DeviceHandler::addressType() const
      {
          if (m_addressType == QLowEnergyController::RandomAddress)
              return DeviceHandler::AddressType::RandomAddress;

          return DeviceHandler::AddressType::PublicAddress;
      }

      void DeviceHandler::setDevice(DeviceInfo *device)
      {
          clearMessages();
          m_currentDevice = device;

      #ifdef SIMULATOR
          setInfo(tr("Demo device connected."));
          return;
      #endif

          // Disconnect and delete old connection
          if (m_control) {
              m_control->disconnectFromDevice();
              delete m_control;
              m_control = 0;
          }

          // Create new controller and connect it if device available
          if (m_currentDevice) {

              // Make connections
              m_control = new QLowEnergyController(m_currentDevice->getDevice(), this);
              m_control->setRemoteAddressType(m_addressType);
              connect(m_control, &QLowEnergyController::serviceDiscovered,
                      this, &DeviceHandler::serviceDiscovered);
              connect(m_control, &QLowEnergyController::discoveryFinished,
                      this, &DeviceHandler::serviceScanDone);

              connect(m_control, static_cast<void (QLowEnergyController::*)(QLowEnergyController::Error)>(&QLowEnergyController::error),
                      this, [this](QLowEnergyController::Error error) {
                  Q_UNUSED(error);
                  setError("Cannot connect to remote device.");
              });
              connect(m_control, &QLowEnergyController::connected, this, [this]() {
                  setInfo("Controller connected. Search services...");
                  m_control->discoverServices();
              });
              connect(m_control, &QLowEnergyController::disconnected, this, [this]() {
                  setError("LowEnergy controller disconnected");
              });

              // Connect
              m_control->connectToDevice();
          }
      }

      void DeviceHandler::startMeasurement()
      {
          if (alive()) {
              m_start = QDateTime::currentDateTime();
              m_min = 0;
              m_max = 0;
              m_avg = 0;
              m_sum = 0;
              m_calories = 0;
              m_measuring = true;
              m_measurements.clear();
              emit measuringChanged();
          }
      }

      void DeviceHandler::stopMeasurement()
      {
          m_measuring = false;
          emit measuringChanged();
      }

      void DeviceHandler::serviceDiscovered(const QBluetoothUuid &gatt)
      {
          if (gatt == QBluetoothUuid(QBluetoothUuid::HeartRate)) {
              setInfo("Heart Rate service discovered. Waiting for service scan to be done...");
              m_foundHeartRateService = true;
          }
      }

      void DeviceHandler::serviceScanDone()
      {
          setInfo("Service scan done.");

          // Delete old service if available
          if (m_service) {
              delete m_service;
              m_service = 0;
          }

          // If heartRateService found, create new service
          if (m_foundHeartRateService)
              m_service = m_control->createServiceObject(QBluetoothUuid(QBluetoothUuid::HeartRate), this);

          if (m_service) {
              connect(m_service, &QLowEnergyService::stateChanged, this, &DeviceHandler::serviceStateChanged);
              connect(m_service, &QLowEnergyService::characteristicChanged, this, &DeviceHandler::updateHeartRateValue);
              connect(m_service, &QLowEnergyService::descriptorWritten, this, &DeviceHandler::confirmedDescriptorWrite);
              m_service->discoverDetails();
          } else {
              setError("Heart Rate Service not found.");
          }
      }

      // Service functions
      void DeviceHandler::serviceStateChanged(QLowEnergyService::ServiceState s)
      {
          switch (s) {
          case QLowEnergyService::DiscoveringServices:
              setInfo(tr("Discovering services..."));
              break;
          case QLowEnergyService::ServiceDiscovered:
          {
              setInfo(tr("Service discovered."));

              const QLowEnergyCharacteristic hrChar = m_service->characteristic(QBluetoothUuid(QBluetoothUuid::HeartRateMeasurement));
              if (!hrChar.isValid()) {
                  setError("HR Data not found.");
                  break;
              }

              m_notificationDesc = hrChar.descriptor(QBluetoothUuid::ClientCharacteristicConfiguration);
              if (m_notificationDesc.isValid())
                  m_service->writeDescriptor(m_notificationDesc, QByteArray::fromHex("0100"));

              break;
          }
          default:
              //nothing for now
              break;
          }

          emit aliveChanged();
      }

      void DeviceHandler::updateHeartRateValue(const QLowEnergyCharacteristic &c, const QByteArray &value)
      {
          // ignore any other characteristic change -> shouldn't really happen though
          if (c.uuid() != QBluetoothUuid(QBluetoothUuid::HeartRateMeasurement))
              return;

          const quint8 *data = reinterpret_cast<const quint8 *>(value.constData());
          quint8 flags = data[0];

          //Heart Rate
          int hrvalue = 0;
          if (flags & 0x1) // HR 16 bit? otherwise 8 bit
              hrvalue = (int)qFromLittleEndian<quint16>(data[1]);
          else
              hrvalue = (int)data[1];

          addMeasurement(hrvalue);
      }

      #ifdef SIMULATOR
      void DeviceHandler::updateDemoHR()
      {
          int randomValue = 0;
          if (m_currentValue < 30) { // Initial value
              randomValue = 55 + qrand()%30;
          } else if (!m_measuring) { // Value when relax
              randomValue = qBound(55, m_currentValue - 2 + qrand()%5, 75);
          } else { // Measuring
              randomValue = m_currentValue + qrand()%10 - 2;
          }

          addMeasurement(randomValue);
      }
      #endif

      void DeviceHandler::confirmedDescriptorWrite(const QLowEnergyDescriptor &d, const QByteArray &value)
      {
          if (d.isValid() && d == m_notificationDesc && value == QByteArray::fromHex("0000")) {
              //disabled notifications -> assume disconnect intent
              m_control->disconnectFromDevice();
              delete m_service;
              m_service = 0;
          }
      }

      void DeviceHandler::disconnectService()
      {
          m_foundHeartRateService = false;

          //disable notifications
          if (m_notificationDesc.isValid() && m_service
                  && m_notificationDesc.value() == QByteArray::fromHex("0100")) {
              m_service->writeDescriptor(m_notificationDesc, QByteArray::fromHex("0000"));
          } else {
              if (m_control)
                  m_control->disconnectFromDevice();

              delete m_service;
              m_service = 0;
          }
      }

      bool DeviceHandler::measuring() const
      {
          return m_measuring;
      }

      bool DeviceHandler::alive() const
      {
      #ifdef SIMULATOR
          return true;
      #endif

          if (m_service)
              return m_service->state() == QLowEnergyService::ServiceDiscovered;

          return false;
      }

      int DeviceHandler::hr() const
      {
          return m_currentValue;
      }

      int DeviceHandler::time() const
      {
          return m_start.secsTo(m_stop);
      }

      int DeviceHandler::maxHR() const
      {
          return m_max;
      }

      int DeviceHandler::minHR() const
      {
          return m_min;
      }

      float DeviceHandler::average() const
      {
          return m_avg;
      }

      float DeviceHandler::calories() const
      {
          return m_calories;
      }

      void DeviceHandler::addMeasurement(int value)
      {
          m_currentValue = value;

          // If measuring and value is appropriate
          if (m_measuring && value > 30 && value < 250) {

              m_stop = QDateTime::currentDateTime();
              m_measurements << value;

              m_min = m_min == 0 ? value : qMin(value, m_min);
              m_max = qMax(value, m_max);
              m_sum += value;
              m_avg = (double)m_sum / m_measurements.size();
              m_calories = ((-55.0969 + (0.6309 * m_avg) + (0.1988 * 94) + (0.2017 * 24)) / 4.184) * 60 * time()/3600;
          }

          emit statsChanged();
      }