openocd (0.10.0-1build1) artful; urgency=medium

  * No-change rebuild against libjim0.77

 -- Steve Langasek <steve.langasek@ubuntu.com>  Fri, 25 Aug 2017 06:51:26 +0000

openocd (0.10.0-1) unstable; urgency=medium

  [ Jonathan McDowell ]
  * New upstream release
    * Includes jtagspi (Closes: #844748)
    * Fixes Intel flash with MIPS target (Closes: #849825)
    * Fixes flyswatter.cfg to use ftdi interface (Closes: #757748)
    * Avoids build date in release builds (Closes: #834316)
  * Disable jlink pending libjaylink package
  * Enable sysfsgpio driver (Closes: #859246)
  * Move to libftdi1-dev (Closes: #810387)
  * Remove duplicated autotools-dev build-dep (Closes: #853010)
  * Switch to libusb-1.0 on kFreeBSD (Closes: #820147)
  * Move maintenance to Debian Electronics Packaging Team
  * Add patch enabling SWD support for Bus Pirate (Closes: #795550)
  * Add explicit build-dep on libusb-0.1, which is still required for 3
    programmers supported by OpenOCD.
  * Bump debhelper compat level to 10.
  * Drop unused + deprecated DEB_STRIP_EXCLUDE / DEB_COMPRESS_EXCLUDE options.
  * Standards-Version: 4.0.1
    * Support nodoc in DEB_BUILD_OPTIONS
    * Switch priority to optional instead of extra

  [ Stefano Rivera ]
  * Clean up copyright file and move to DEP-8

 -- Jonathan McDowell <noodles@earth.li>  Fri, 18 Aug 2017 10:51:30 +0100

openocd (0.9.0-1) unstable; urgency=medium

  * new upstream stable release
  * watch: check pgp signature on upstream tarballs
  * control: bumped policy version

 -- Luca Bruno <lucab@debian.org>  Tue, 19 May 2015 22:13:26 +0200

openocd (0.9.0~rc1-1) unstable; urgency=medium

  * New upstream release
  * Stop using embedded jimtcl, use packaged one instead
  * Packaging imported to git
    + Add gbp configuration for new repository
    + Add related Vcs-* tags

 -- Luca Bruno <lucab@debian.org>  Sat, 25 Apr 2015 22:55:38 +0200

openocd (0.8.0-4) unstable; urgency=medium

  * Enable usb_blaster_libftdi on linux
  * Build-dep on libusb2-dev on kfreebsd
    (Closes: #754678)

 -- Luca Bruno <lucab@debian.org>  Mon, 20 Oct 2014 22:11:28 +0200

openocd (0.8.0-3) unstable; urgency=high

  * Require libusb-dev from freebsd-libs 10 snapshot
    (Closes: #754678) 

 -- Luca Bruno <lucab@debian.org>  Sun, 19 Oct 2014 19:12:49 +0200

openocd (0.8.0-2) unstable; urgency=medium

  * tcl/board: fix all the remaining boards that were sourcing 
    ft2232 configs (Closes: #751372)

 -- Luca Bruno <lucab@debian.org>  Sun, 17 Aug 2014 11:42:14 +0200

openocd (0.8.0-1) unstable; urgency=medium

  * New upstream stable release
    + Adjust build-dep for kfreebsd and hurd
    + Enable more GPIO-based adapters
  * Bumped Standards-Version
  * Updated watch file, thanks Bart Martens
  * Cleaned several unused legacy rules
  * Updated copyright entries

 -- Luca Bruno <lucab@debian.org>  Sat, 10 May 2014 19:14:51 +0200

openocd (0.8.0~rc1-1) unstable; urgency=medium

  * New upstream rc release
    + Added pkg-config build-dep
    + Now using libusb-1.0-0

 -- Luca Bruno <lucab@debian.org>  Sat, 05 Apr 2014 10:30:08 +0200

openocd (0.7.0-2) unstable; urgency=low

  * Only build on linux-any targets needing libusb-1.0-0

 -- Luca Bruno <lucab@debian.org>  Sun, 04 Aug 2013 11:25:52 +0200

openocd (0.7.0-1) unstable; urgency=low

  * New upstream release

 -- Luca Bruno <lucab@debian.org>  Wed, 15 May 2013 12:18:17 +0200

openocd (0.6.1-1) unstable; urgency=low

  * New upstream release (Closes: #644015).
    - Use configure options: --enable-ftdi, --enable-stlink, --enable-osbdm,
      --enable-opendous, --enable-remote-bitbang
  * Standards-Version: 3.9.4 (no changes required).
  * Use http://openocd.sourceforge.net/ as new upstream homepage.

 -- Uwe Hermann <uwe@debian.org>  Tue, 04 Dec 2012 23:54:54 +0100

openocd (0.5.0-1) unstable; urgency=low

  * New upstream release.
    + Drop all our patches, no need to touch autotools.
    + Use upstream changelog now shipped within tarball.
  * debian/watch: pointed to SF file depot.

 -- Luca Bruno <lucab@debian.org>  Tue, 09 Aug 2011 09:33:35 +0200

openocd (0.5.0~rc2-2) unstable; urgency=low

  * Acknowledge NMU, thanks Hector.
  * Fix FTBFS on non-linux ports (Closes: #633404).
  * Don't list STM Primer2 as a supported device (Closes: #633532). 
  * Update ChangeLog for this RC release.

 -- Luca Bruno <lucab@debian.org>  Thu, 21 Jul 2011 15:51:03 +0200

openocd (0.5.0~rc2-1.1) unstable; urgency=low

  * Non-maintainer upload.
  * Replace linux architectures with linux-any (Closes: #617775)

 -- Hector Oron <zumbi@debian.org>  Mon, 11 Jul 2011 14:00:12 +0100

openocd (0.5.0~rc2-1) unstable; urgency=low

  * New upstream release candidate.
  * Acknowledge previous NMUs, thanks Luk.
  * Added myself as uploader, with Uwe permission.

 -- Luca Bruno <lucab@debian.org>  Thu, 07 Jul 2011 09:54:00 +0200

openocd (0.4.0-1+nmu1.2) unstable; urgency=low

  * Non-maintainer upload.
  * Update lintian overrides so it does not get rejected.

 -- Luk Claes <luk@debian.org>  Thu, 30 Jun 2011 18:30:42 +0200

openocd (0.4.0-1+nmu1.1) unstable; urgency=low

  * Non-maintainer upload.
  * Don't ship .la files(Closes: #622431).

 -- Luk Claes <luk@debian.org>  Sat, 25 Jun 2011 15:02:19 +0200

openocd (0.4.0-1+nmu1) unstable; urgency=low

  * Non-maintainer upload.
  * Add patch to build ep93xx and at91rm9200 on armel (Closes: #597932).
  * Disable parport, gw16012 and amtjtagaccel drivers on GNU/HURD,
    rules snippet by Pino Toscano. 

 -- Luca Bruno <lucab@debian.org>  Sat, 25 Sep 2010 20:26:48 +0200

openocd (0.4.0-1) unstable; urgency=low

  * New upstream release (Closes: #564842).
    + Fixes udev rules warnings (Closes: #560141).
  * Rebuild to fix "segfault when interface not connected" (Closes: #568226).
  * Standards-Version: 3.8.4 (no changes required).

 -- Uwe Hermann <uwe@debian.org>  Thu, 04 Feb 2010 01:45:30 +0100

openocd (0.3.1-1) unstable; urgency=low

  * New upstream release (Closes: #554598, #537740).
  * Add sh4 (instead of sh) to the list of architectures (Closes: #555553).
  * Standards-Version: 3.8.3 (no changes required).
  * debian/watch: Add file.
  * debian/docs: Updates, some files were removed, some added.

 -- Uwe Hermann <uwe@debian.org>  Wed, 25 Nov 2009 12:20:04 +0100

openocd (0.2.0+r2529-1) unstable; urgency=low

  * New upstream release (this corresponds to upstream 0.2.0 roughly).
    + The 'target library' is now in /usr/share/openocd/*.
  * NEWS and README contain useful info now, so ship them in the package.

 -- Uwe Hermann <uwe@debian.org>  Wed, 15 Jul 2009 21:27:39 +0200

openocd (0.0+r2403-1) unstable; urgency=low

  * New upstream release.
  * Standards-Version: 3.8.2 (no changes required).
  * Add missing build-dependency 'texlive' (Closes: #533465).

 -- Uwe Hermann <uwe@debian.org>  Thu, 25 Jun 2009 18:02:44 +0200

openocd (0.0+r2172-1) unstable; urgency=low

  * New upstream release.
  * debian/patches/20_fix_warnings.patch: Drop.
  * Upgrade autoconf build-dependecy to >= 2.60 as per upstream.
  * Add new upstream build-dependency on libtool.
  * Various docs have been removed, moved, and added. See
    /usr/share/doc/openocd for the current list of documentation
    files (apart from manpage and info page).
  * Add debian/openocd.doc-base and install docs in PDF and HTML format also.

 -- Uwe Hermann <uwe@debian.org>  Tue, 09 Jun 2009 15:32:53 +0200

openocd (0.0+r1606-1) unstable; urgency=low

  * New upstream release.
  * Use --disable-werror for now until all warnings have been fixed
    upstream (Closes: #526441, #527100).
  * Build-depend on automake (>= 1.6) as per upstream.

 -- Uwe Hermann <uwe@debian.org>  Tue, 05 May 2009 18:39:03 +0200

openocd (0.0+r1583-1) unstable; urgency=low

  * New upstream release.
  * Standards-Version: 3.8.1 (no changes required).

 -- Uwe Hermann <uwe@debian.org>  Thu, 30 Apr 2009 22:00:57 +0200

openocd (0.0+r1409-1) unstable; urgency=low

  * New upstream release.
  * debian/control: Update description, including newly supported dongles.
  * debian/rules: Add --enable-arm-jtag-ew to support the Olimex
    ARM-JTAG-EW JTAG programmer.
  * debian/patches/10_fix_warnings.patch: Drop, merged upstream.
  * debian/openocd.udev: Drop, merged upstream.
  * Show openocd svn revision in --version output (Closes: #517296).
  * Don't ship the 'ecosflash' and 'testing' dirs for now, not too useful.

 -- Uwe Hermann <uwe@debian.org>  Wed, 11 Mar 2009 19:29:27 +0100

openocd (0.0+r1292-1) unstable; urgency=low

  * New upstream release.
    * debian/rules:
      + Add --enable-jlink, --enable-vsllink, --enable-rlink.
      + Use chrpath to strip newly introduced (upstream) RPATH.
  * debian/openocd.udev: Add file. Adds udev rules to allow the 'plugdev' group
    JTAG programmer access without having to become root (Closes: #508921).
    Currently there are rules for the programmers 'Olimex ARM-USB-OCD' and
    'USBprog with OpenOCD firmware' (untested, but should work).
  * debian/patches/10_fix_ep93xx.patch: Drop, similar patch merged upstream.
  * debian/patches/10_fix_warnings.patch: Add.
  * debian/docs: Add NEWTAPS.
  * debian/copyright: Add license of various new files.

 -- Uwe Hermann <uwe@debian.org>  Sun, 28 Dec 2008 15:02:52 +0100

openocd (0.0+r1147-1) unstable; urgency=low

  * New upstream release.
  * debian/patches/10_fix_ep93xx.patch: Fix build on armel (Closes: #504740).

 -- Uwe Hermann <uwe@debian.org>  Sun, 09 Nov 2008 02:32:52 +0100

openocd (0.0+r1130-1) unstable; urgency=low

  * Acknowledge NMU, thanks Riku Voipio <riku.voipio@iki.fi> (Closes: #489048).
  * New upstream release.
    + There were many changes upstream, be prepared to update your
      configs/scripts. Consult the "Upgrading" info page chapter for details.
    + Notable improvements of this upstream release include some support for
      MIPS systems (EJTAG), support for the JLINK adapter, a Jim Tcl server,
      various new flashes and targets, and lots of bug fixes.
    + There are some cortex-m3 example configs upstream now (Closes: #489785).
  * Standards-Version: 3.8.0 (no changes required).
  * dh_strip/dh_compress -X doesn't expect a glob pattern (Closes: #487504).
  * debian/docs, debian/rules:
    + Drop README (obsoleted upstream in favor of the info page).
    + Add PATCHES, src/tcl/README_ABOUT_TCL.txt, src/target/target/readme.txt,
      src/scripting.txt, src/non-arm-targets.txt.
    + Add 'svn log' output as upstream ChangeLog to the package.
  * debian/openocd.lintian-overrides: More entries to silence bogus warnings.
  * debian/patches/10_buildfix.patch: Drop, merged upstream.
  * debian/README.Debian: Small updates.
  * debian/watch: Add dummy file (we track svn revisions).
  * debian/copyright: Major update, lots of new files upstream.

 -- Uwe Hermann <uwe@debian.org>  Thu, 06 Nov 2008 12:11:05 +0100

openocd (0.0+r655-1.1) unstable; urgency=low

  * Non-maintainer upload.
  * disable ecosboard build, closes: #489048

 -- Riku Voipio <riku.voipio@iki.fi>  Mon, 11 Aug 2008 21:09:24 +0300

openocd (0.0+r655-1) unstable; urgency=low

  * New upstream release.
    + Fixes coredump on AMD64 (Closes: #480473).
    + There were various syntax changes upstream, please check the info page.
  * debian/examples:
    + Add libdcc/ and testing/ subdirectories.
    + Drop configs/ and scripts/ from examples/ (as dropped upstream).
  * debian/docs: Add new BUGS file.
  * debian/README.Debian: Various updates.
  * debian/patches/10_presto_fix.patch: Drop, merged upstream.
  * Add --enable-dummy and --enable-ecosboard to the ./configure call.
  * Install a lintian override file.

 -- Uwe Hermann <uwe@debian.org>  Sun, 11 May 2008 21:56:58 +0200

openocd (0.0+r423-1) unstable; urgency=low

  * New upstream release.
    + There were various changes in the config file syntax, new commands
      were added, obsolete ones removed etc. Some of these changes are
      incompatible (!) so you might need to rewrite or fix some of your
      config files or scripts. Please check the docs/wiki for details.
    + OpenOCD now ships with an info page (type 'info openocd').
  * debian/control:
     + Add Homepage field.
     + Standards-Version: 3.7.3 (no changes required).
     + Versioned dependency on autoconf >= 2.59 as per upstream.
     + Add build-dependency on texinfo as new openocd versions use it.
  * debian/README.Debian: Update notes.
  * debian/copyright:
     + Update, add missing entries.
     + Convert the file to the machine-readable format explained at
       http://wiki.debian.org/Proposals/CopyrightFormat.
  * debian/patches/20_fix_arm_build.patch: Drop, merged upstream.
  * debian/patches/10_readme.patch: Drop, merged upstream.
  * Add --enable-presto_libftdi (for the ASIX Presto programmer).

 -- Uwe Hermann <uwe@debian.org>  Sat, 01 Mar 2008 21:08:22 +0100

openocd (0.0+r211-1) unstable; urgency=low

  * New upstream release.
  * Remove --enable-oocd_trace (support for the OpenOCD+trace ETM capture
    device) for now, as per upstream recommendation. This should also
    fix the SPARC build.

 -- Uwe Hermann <uwe@debian.org>  Sun, 18 Nov 2007 17:22:49 +0100

openocd (0.0+r204-1) unstable; urgency=low

  * New upstream release.
  * Remove all Debian patches which are merged upstream now.
  * Add --enable-oocd_trace to support the OpenOCD+trace ETM capture device.

 -- Uwe Hermann <uwe@debian.org>  Fri, 07 Sep 2007 17:48:58 +0200

openocd (0.0+r188-1) unstable; urgency=low

  * New upstream release.
  * Add armel to the list of architectures (Closes: #434842).
  * Fix the build on Debian GNU/kFreeBSD (Closes: #436527).
  * Do not supply --enable-gw16012 and --enable-amtjtagaccel on
    Debian GNU/kFreeBSD, as that code doesn't support kFreeBSD (yet).
  * Remove unneeded '#include <sys/io.h>' lines, as sys/io.h is not
    available on all architectures. Trying to include the file anyway
    would result in a FTBFS on those architectures.
    With this fix, at least powerpc and mips/mipsel should build fine now.

 -- Uwe Hermann <uwe@debian.org>  Wed, 08 Aug 2007 09:52:50 +0200

openocd (0.0+r184-1) unstable; urgency=low

  * New upstream release.
     + Should build on most (if not all) architectures now.
     + Drop patches/10_bootstrap.patch (merged upstream).
  * Do not attempt to build openocd on S/390. Even if it would compile
    successfully, there's really no point in having openocd on this
    architecture as it lacks parallel ports and USB ports for use with one
    of the openocd-supported JTAG programmers (Closes: #420470).

 -- Uwe Hermann <uwe@debian.org>  Thu, 26 Jul 2007 20:06:47 +0200

openocd (0.0+r180-1) unstable; urgency=low

  * New upstream release.
  * The manpage I wrote for openocd is now merged upstream.

 -- Uwe Hermann <uwe@debian.org>  Wed, 25 Jul 2007 18:02:09 +0200

openocd (0.0+r141-1) unstable; urgency=low

  * New upstream release.

 -- Uwe Hermann <uwe@debian.org>  Mon, 23 Apr 2007 17:15:14 +0200

openocd (0.0+r133-1) unstable; urgency=low

  * Initial release (Closes: #415632).

 -- Uwe Hermann <uwe@debian.org>  Tue, 27 Mar 2007 14:46:18 +0200

