pgbackrest (2.16-1) unstable; urgency=medium

  * New Upstream Release:
    - Bug Fixes:
      * Retry S3 RequestTimeTooSkewed errors instead of immediately
      terminating.
      * Fix incorrect handling of transfer-encoding response to HEAD request.
      * Fix scoping violations exposed by optimizations in gcc 9.
    - Features:
      * Add repo-s3-port option for setting a non-standard S3 service port.
    - Improvements:
      * The local command for backup is implemented entirely in C.
      * The check command is implemented partly in C.
  * Adjust dependencies.

 -- Adrian Vondendriesch <adrian.vondendriesch@credativ.de>  Thu, 08 Aug 2019 20:33:32 +0200

pgbackrest (2.15.1-1) unstable; urgency=medium

  * New Upstream Release:
    - Bug Fixes:
      * Fix archive retention expiring too aggressively.
    - Improvements:
      * The expire command is implemented entirely in C.
      * The local command for restore is implemented entirely in C.
      * Remove hard-coded PostgreSQL user so $PGUSER works.
      * Honor configure --prefix option.
      * Rename repo-s3-verify-ssl option to repo-s3-verify-tls. The new name is
        preferred because pgBackRest does not support any SSL protocol versions
        (they are all considered to be insecure). The old name will continue to
        be accepted.
    - Documentation Improvements:
      * Add FAQ to the documentation.
      * Use wal_level=replica in the documentation for PostgreSQL ≥ 9.6.
  * d/rules: Use --prefix parameter in configure script.

 -- Adrian Vondendriesch <adrian.vondendriesch@credativ.de>  Thu, 27 Jun 2019 15:58:27 +0200

pgbackrest (2.14-1) unstable; urgency=medium

  * New Upstream release:
    - Bug Fixes:
      * Fix segfault when process-max > 8 for archive-push/archive-get.
    - Improvements:
      * Bypass database checks when stanza-delete issued with force.
      * Add configure script for improved multi-platform support.
    - Documentation Features:
      * Add user guides for CentOS/RHEL 6/7.

 -- Adrian Vondendriesch <adrian.vondendriesch@credativ.de>  Fri, 31 May 2019 13:30:11 +0200

pgbackrest (2.13-1) unstable; urgency=medium

  * New Upstream release:
    - Bug Fixes:
      * Fix zero-length reads causing problems for IO filters that did not
        expect them.
      * Fix reliability of error reporting from local/remote processes.
      * Fix Posix/CIFS error messages reporting the wrong filename on
        write/sync/close.

 -- Adrian Vondendriesch <adrian.vondendriesch@credativ.de>  Fri, 19 Apr 2019 10:26:04 +0200

pgbackrest (2.12-1) unstable; urgency=medium

  * d/rules. Add hardening flags "+all".
  * New Upstream release:
    - IMPORTANT NOTE: The new TLS/SSL implementation forbids dots in S3
      bucket names per RFC-2818. This security fix is required for compliant
      hostname verification.
    - Bug Fixes:
      * Fix issues when a path option is / terminated.
      * Fix issues when log-level-file=off is set for the archive-get command.
      * Fix C code to recognize host:port option format like Perl does.
      * Fix issues with remote/local command logging options.
    - Improvements:
      * The archive-push command is implemented entirely in C.
      * Increase process-max limit to 999.
      * Improve error message when an S3 bucket name contains dots.
    - Documentation Improvements:
      * Clarify that S3-compatible object stores are supported.

 -- Adrian Vondendriesch <adrian.vondendriesch@credativ.de>  Sat, 13 Apr 2019 17:09:19 +0200

pgbackrest (2.11-1) unstable; urgency=medium

  * Update d/rules to represent Makefile changes.
  * New Upstream release:
    - Bug Fixes:
      * Fix possible truncated WAL segments when an error occurs
        mid-write.
      * Fix info command missing WAL min/max when stanza specified.
      * Fix non-compliant JSON for options passed from C to Perl.
    - Improvements:
      * The archive-get command is implemented entirely in C.
      * Enable socket keep-alive on older Perl versions.
      * Error when parameters are passed to a command that does not accept
        parameters.
      * Add hints when unable to find a WAL segment in the archive.
      * Improve error when hostname cannot be found in a certificate.
      * Add additional options to backup.manifest for debugging purposes.
    - Documentation Improvements:
      * Update default documentation version to PostgreSQL 10.

 -- Adrian Vondendriesch <adrian.vondendriesch@credativ.de>  Tue, 12 Mar 2019 11:18:19 +0100

pgbackrest (2.10-1) unstable; urgency=medium

  [ Adrian Vondendriesch ]
  * Bug Fixes:
    - Add unimplemented S3 driver method required for archive-get.
    - Fix check for improperly configured pg-path.
  [ Christoph Berg ]
  * Update PostgreSQL Maintainers address.

 -- Adrian Vondendriesch <adrian.vondendriesch@credativ.de>  Mon, 11 Feb 2019 19:00:50 +0100

pgbackrest (2.08-2) unstable; urgency=medium

  * Change default permissions of newly created pgbackrest directories and
    config files. (Closes: #920268)
    - Especially /var/lib/pgbackrest might contain sensitive information
      and shouldn't be readable by others. Change default permissions to
      0750.
    - /etc/pgbackrest.conf might contain encryption keys. Change default
      permissions to 0640.

 -- Adrian Vondendriesch <adrian.vondendriesch@credativ.de>  Wed, 23 Jan 2019 14:33:15 +0100

pgbackrest (2.08-1) unstable; urgency=medium

  * New Upstream release:
    - Bug Fixes:
      * Remove request for S3 object info directly after putting it.
      * Correct archive-get-queue-max to be size type.
      * Add error message when current user uid/gid does not map to a name.
      * Error when --target-action=shutdown specified for PostgreSQL < 9.5.
    - Improvements:
      * Set TCP keepalives on S3 connections.
      * Reorder info command text output so most recent backup is output last.
      * Change file ownership only when required.
      * Redact authentication header when throwing S3 errors.
  * d/control:
    - Add libxml2-dev to B-D
    - Bump Standards-Version to 4.3.0
    - Slightly improve package long description

 -- Adrian Vondendriesch <adrian.vondendriesch@credativ.de>  Mon, 07 Jan 2019 17:39:12 +0100

pgbackrest (2.07-1) unstable; urgency=medium

  * New Upstream release:
    - Bug Fixes:
      * Fix issue with archive-push-queue-max not being honored on connection
        error.
      * Fix static WAL segment size used to determine if
        archive-push-queue-max has been exceeded.
      * Fix error after log file open failure when processing should continue.
    - Features:
      * Automatically enable backup checksum delta when anomalies (e.g.
        timeline switch) are detected.
    - Improvements:
      * Retry all S3 5xx errors rather than just 500 internal errors.

 -- Adrian Vondendriesch <adrian.vondendriesch@credativ.de>  Sun, 18 Nov 2018 13:37:00 +0100

pgbackrest (2.06-1) unstable; urgency=medium

  * New Upstream release:
    - Bug Fixes:
      * Fix missing URI encoding in S3 driver.
      * Fix incorrect error message for duplicate options in configuration
        files.
      * Fix incorrectly reported error return in info logging. A return code
        of 1 from the archive-get was being logged as an error message at info
        level but otherwise worked correctly.
    - Features:
      * Add checksum delta for incremental backups which uses checksums rather
        than timestamps to determine if files have changed.
      * PostgreSQL 11 support, including configurable WAL segment size.
    - Improvements:
      * Ignore all files in a linked tablespace directory except the
        subdirectory for the current version of PostgreSQL. Previously an
        error would be generated if other files were present and not owned by
        the PostgreSQL user.
      * Improve info command to display the stanza cipher type.
      * Improve support for special characters in filenames.
      * Allow delta option to be specified in the pgBackRest configuration
        file.

 -- Adrian Vondendriesch <adrian.vondendriesch@credativ.de>  Tue, 16 Oct 2018 19:01:33 +0200

pgbackrest (2.05-1) unstable; urgency=medium

  * d/control: Add zlib1g-dev to B-D.
  * New Upstream release:
    - Bug Fixes:
      * Fix issue where relative links in $PGDATA could be stored in the
        backup with the wrong path. This issue did not affect
        absolutelinks and relative tablespace links were caught by other
        checks.
      * Remove incompletely implemented online option from the check
        command. Offline operation runs counter to the purpose of this
        command, which is to check if archiving and backups are working
        correctly.
      * Fix issue where errors raised in C were not logged when called
        from Perl. pgBackRest properly terminated with the correct error
    	code but lacked an error message to aid in debugging.
      * Fix issue when a boolean option (e.g. delta) was specified more
        than once.
    - Features:
      * Allow any option to be set in an environment variable. This
        includes options that previously could only be specified on the
        command line, e.g. stanza, and secret options that could not be
        specified on the command-line, e.g. repo1-s3-key-secret.
      * Exclude temporary and unlogged relation (table/index) files from
        backup. Implemented using the same logic as the patches adding
        this feature to PostgreSQL, 8694cc96 and 920a5e50. Temporary
        relation exclusion is enabled in PostgreSQL ≥ 9.0. Unlogged
        relation exclusion is enabled in PostgreSQL ≥ 9.1, where the
        feature was introduced.
      * Allow arbitrary directories and/or files to be excluded from a
        backup. Misuse of this feature can lead to inconsistent backups so
        read the --exclude documentation carefully before using.
      * Add log-subprocess option to allow file logging for local and
        remote subprocesses.
      * PostgreSQL 11 Beta 3 support.
    - Improvements:
      * Allow zero-size files in backup manifest to reference a prior
        manifest regardless of timestamp delta.
      * Improve asynchronous archive-get/archive-push performance by
        directly checking status files.
      * Improve error message when a command is missing the stanza option.

 -- Adrian Vondendriesch <adrian.vondendriesch@credativ.de>  Mon, 03 Sep 2018 20:35:16 +0200

pgbackrest (2.04-2) unstable; urgency=medium

  * d/rules:
    - Fix the documentation build process by adjusting the content of command
      output cache that is required to building the docs (Closes: #903245).

 -- Adrian Vondendriesch <adrian.vondendriesch@credativ.de>  Sat, 07 Jul 2018 14:08:32 +0200

pgbackrest (2.04-1) unstable; urgency=medium

  * New Upstream release:
    - Critical Bug Fix for Backup Resume:
      **IMPORTANT NOTE**: This release fixes a critical bug in the
      backup resume feature. All resumed backups prior to this release should
      be considered inconsistent. A backup will be resumed after a prior
      backup fails, unless resume=n has been specified. A resumed backup can be
      identified by checking the backup log for the message "aborted backup of
      same type exists, will be cleaned to remove invalid files and resumed".
      If the message exists, do not use this backup or any backup in the same
      set for a restore and check the restore logs to see if a resumed backup
      was restored. If so, there may be inconsistent data in the cluster.
    - Bug Fixes:
      * Fix critical bug in resume that resulted in inconsistent
        backups. A regression in v0.82 removed the timestamp comparison when
        deciding which files from the aborted backup to keep on resume. See
        note above for more details.
      * Fix error in selective restore when only one user database exists in
        the cluster.
      * Fix non-compliant ISO-8601 timestamp format in S3 authorization
        headers. AWS and some gateways were tolerant of space rather than
        zero-padded hours while others were not.
    - Features:
      * PostgreSQL 11 Beta 2 support.
    - Improvements:
      * Improve the HTTP client to set content-length to 0 when not specified
        by the server. S3 (and gateways) always set content-length or
        transfer-encoding but HTTP 1.1 does not require it and proxies (e.g.
        HAProxy) may not include either.
      * Set search_path = 'pg_catalog' on PostgreSQL connections.

 -- Adrian Vondendriesch <adrian.vondendriesch@credativ.de>  Fri, 06 Jul 2018 10:24:40 +0200

pgbackrest (2.03-1) unstable; urgency=medium

  * Drop C library.
  * Update Suggests. Include:
    - libio-socket-ssl-perl
    - libxml-libxml-perl
  * New Upstream release:
    - Bug Fixes:
      * Fix potential buffer overrun in error message handling.
      * Fix archive write lock being taken for the synchronous archive-get
        command.
    - Improvements:
      * Embed exported C functions and Perl modules directly into the
        pgBackRest executable.
      * Use time_t instead of __time_t for better portability.
      * Print total runtime in milliseconds at command end.

 -- Adrian Vondendriesch <adrian.vondendriesch@credativ.de>  Tue, 29 May 2018 10:45:42 +0200

pgbackrest (2.02-1) unstable; urgency=medium

  [ Christoph Berg ]
  * Install C module to "vendor" directory. Thanks Niko Tyni!
    (Closes: #896121)

  [ Adrian Vondendriesch ]
  * New Upstream release:
    - Bug Fixes
      * Fix directory syncs running recursively when only the specified
        directory should be synced.
      * Fix archive-copy throwing "path not found" error for incr/diff
        backups.
      * Fix failure in manifest build when two or more files in PGDATA are
        linked to the same directory.
      * Fix delta restore failing when a linked file is missing.
      * Fix rendering of key/value and list options in help.
    - Features:
      * Add asynchronous, parallel archive-get. This feature maintains a queue
        of WAL segments to help reduce latency when PostgreSQL requests a WAL
        segment with restore_command.
      * Add support for additional pgBackRest configuration files in the
        directory specified by the --config-include-path option. Add
        --config-path option for overriding the default base path of the
        --config and --config-include-path option.
      * Add repo-s3-token option to allow temporary credentials tokens to be
        configured. pgBackRest currently has no way to request new credentials
        so the entire command (e.g. backup, restore) must complete before the
        credentials expire.
    - Improvements:
      * Update the archive-push-queue-max, manifest-save-threshold, and
        buffer-size options to accept values in KB, MB, GB, TB, or PB where
        the multiplier is a power of 1024.
      * Make backup/restore path sync more efficient. Scanning the entire
        directory can be very expensive if there are a lot of small tables.
        The backup manifest contains the path list so use it to perform syncs
        instead of scanning the backup/restore path.
      * Show command parameters as well as command options in initial info log
        message.
      * Rename archive-queue-max option to archive-push-queue-max to avoid
        confusion with the new archive-get-queue-max option. The old option
        name will continue to be accepted

 -- Adrian Vondendriesch <adrian.vondendriesch@credativ.de>  Wed, 25 Apr 2018 11:35:11 +0200

pgbackrest (2.01-1) unstable; urgency=medium

  * New Upstream release:
    - Bug Fixes:
      * Fix --target-action and --recovery-option options being reported as
        invalid when restoring with --type=immediate.
      * Immediately error when a secure option (e.g. repo1-s3-key) is passed
        on the command line. Since pgBackRest would not pass secure options
        on to sub-processes an obscure error was thrown. The new error is much
        clearer and provides hints about how to fix the problem. Update
        command documentation to omit secure options that cannot be specified
        on the command-line.
      * Fix issue passing --no-config to embedded Perl.
      * Fix issue where specifying log-level-stderr > warn would cause a
        local/remote process to error on exit due to output found on
        stderr when none was expected. The max value for a local/remote
        process is now error since there is no reason for these processes to
        emit warnings.
      * Fix manifest test in the check command when tablespaces are present.
    - Improvements:
      * Error when multiple arguments are set in the config file for an
        option that does not accept multiple arguments.
      * Remove extraneous sudo commands from src/Makefile.
    - See http://pgbackrest.org/release.html#2.01
  * d/patches:
    - Drop Makefile patch.

 -- Adrian Vondendriesch <adrian.vondendriesch@credativ.de>  Wed, 21 Mar 2018 12:11:46 +0100

pgbackrest (2.00-1) unstable; urgency=medium

  * New Upstream release:
    - Features:
      * The archive-push command is now partially coded in C which allows
        the PostgreSQL archive_command to run significantly faster when
        processing status messages from the asynchronous archive process.
    - Improvements:
      * Improve check command to verify that the backup manifest can be
        built.
      * Improve performance of HTTPS client. Buffering now takes the
        pending bytes on the socket into account (when present) rather than
        relying entirely on select(). In some instances the final bytes
    	would not be flushed until the connection was closed.
      * Improve S3 delete performance. The constant S3_BATCH_MAX had been
        replaced with a hard-coded value of 2, probably during testing.
      * Allow any non-command-line option to be reset to default on the
        command-line. This allows options in pgbackrest.conf to be reset
    	to default which reduces the need to write new configuration filesfor
    	specific needs.
      * The C library is now required. This eliminates conditional loading and
        eases development of new library features.
      * The pgbackrest executable is now a C binary instead of Perl. This
        allows certain time-critical commands (like async archive-push) to run
        more quickly.
      * Rename db-* options to pg-* and backup-* options to repo-* to
        improve consistency. repo-* options are now indexed although currently
        only one is allowed.
    - See http://pgbackrest.org/release.html#2.00

 -- Adrian Vondendriesch <adrian.vondendriesch@credativ.de>  Tue, 27 Feb 2018 17:12:39 +0100

pgbackrest (1.28-1) unstable; urgency=medium

  * New Upstream release:
    - Bug Fixes:
      * Fixed inability to restore a single database contained in a tablespace
        using --db-include.
      * Ensure latest db-id is selected on when matching archive.info to
        backup.info. This provides correct matching in the event there are
        system-id and db-version duplicates (e.g. after reverting a
        pg_upgrade).
      * Fixed overly chatty error message when reporting an invalid command.
    - Features:
      * Add stanza-delete command to cleanup unused stanzas.
    - Improvements:
      * Improve stanza-create command so that it does not error when the
        stanza already exists.

 -- Adrian Vondendriesch <adrian.vondendriesch@credativ.de>  Sat, 03 Feb 2018 14:58:32 +0100

pgbackrest (1.27-1) unstable; urgency=medium

  * New Upstream release:
    - Bug Fixes:
      * Fixed an issue that suppressed locality errors for backup and restore.
        When a backup host is present, backups should only be allowed on the
        backup host and restores should only be allowed on the database host
        unless an alternate configuration is created that ignores the remote
        host.
      * Fixed an issue where WAL was not expired on PostgreSQL 10. This was
        caused by a faulty regex that expected all PostgreSQL major versions
        to be X.X.
      * Fixed an issue where the --no-config option was not passed to child
        processes. This meant the child processes would still read the local
        config file and possibly cause unexpected behaviors.
      * Fixed info command to eliminate "db (prior)" output if no backups or
        archives exist for a prior version of the cluster.
    - See http://pgbackrest.org/release.html#1.27

 -- Adrian Vondendriesch <adrian.vondendriesch@credativ.de>  Thu, 21 Dec 2017 17:59:43 +0100

pgbackrest (1.26-1) unstable; urgency=medium

  * New Upstream release:
    - Bug Fixes:
      * Fixed an issue that could cause copying large manifests to fail during
        restore.
      * Fixed incorrect WAL offset for 32-bit architectures.
      * Fixed an issue retrieving WAL for old database versions. After a
        stanza-upgrade it should still be possible to restore backups from the
        previous version and perform recovery with archive-get. However,
        archive-get only checked the most recent db version/id and failed.
        Also clean up some issues when the same db version/id appears multiple
        times in the history.
      * Fixed an issue with invalid backup groups being set correctly on
        restore. If the backup cannot map a group to a name it stores the
        group in the manifest as false then uses either the owner of $PGDATA
        to set the group during restore or failing that the group of the
        current user.  This logic was not working correctly because the
        selected group was overwriting the user on restore leaving the group
        undefined and the user incorrectly set to the group.
      * Fixed an issue passing parameters to remotes. When more than one db
        was specified the path, port, and socket path would for db1 were
        passed no matter which db was actually being addressed.
    - Features:
      * Repository encryption support.
    - See http://www.pgbackrest.org/release.html#1.26
  * d/control: Add libssl-dev to B-D.
  * d/tests: Fix error handling in "suite" test

 -- Adrian Vondendriesch <adrian.vondendriesch@credativ.de>  Wed, 22 Nov 2017 22:11:32 +0100

pgbackrest (1.25-1) unstable; urgency=medium

  * New Upstream release:
    - Bug Fixes:
      * Fix custom settings for compress-level option being ignored.
      * Remove error when overlapping timelines are detected. Overlapping
        timelines are valid in many Point-in-Time-Recovery (PITR) scenarios.
      * Fix instances where database-id was not rendered as an integer in JSON
        info output.
    - Features:
      * Improve performance of list requests on S3.
    - See http://www.pgbackrest.org/release.html#1.25
  * Bump Standards-Version to 4.1.1.

 -- Adrian Vondendriesch <adrian.vondendriesch@credativ.de>  Wed, 25 Oct 2017 15:17:11 +0200

pgbackrest (1.24-1) unstable; urgency=medium

  * New Upstream release:
    - Bug Fixes:
      * Fixed an issue where warnings were being emitted in place of lower
        priority log messages during backup from standby initialization.
      * Fixed an issue where some db-* options (e.g. db-port) were not
        being passed to remotes.
    - Features:
      * Exclude contents of pg_snapshots, pg_serial, pg_notify, and
        pg_dynshmem from backup since they are rebuilt on startup.
      * Exclude pg_internal.init files from backup since they are rebuilt
        on startup.
    - See http://www.pgbackrest.org/release.html#1.24

 -- Adrian Vondendriesch <adrian.vondendriesch@credativ.de>  Fri, 29 Sep 2017 10:33:45 +0200

pgbackrest (1.23-1) unstable; urgency=medium

  * New Upstream release:
    - Bug Fixes:
      * Fixed an issue that could cause compression to abort on growing files.
      * Fixed an issue with keep-alives not being sent to the remote from the
        local process.
    - Features:
      * Up to seven standbys can be configured for backup from standby.
      * PostgreSQL 10 support.
      * Allow content-length (in addition to chunked encoding) when reading
        XML data to improve compatibility with third-party S3 gateways.
    - Refactoring:
      * Configuration rules are now pulled from the C library when present.
      * Increase HTTP timeout for S3.
      * Add HTTP retries to harden against transient S3 network errors.
    - See http://www.pgbackrest.org/release.html#1.23

 -- Adrian Vondendriesch <adrian.vondendriesch@credativ.de>  Mon, 04 Sep 2017 10:23:18 +0200

pgbackrest (1.22-1) unstable; urgency=medium

  * New Upstream release:
    - Retry after internal S3 errors
    - Changed info command output
    - Configurable ssh ports (--backup-ssh-port / --db-ssh-port)
    - See http://www.pgbackrest.org/release.html#1.21 as well as #1.22

 -- Adrian Vondendriesch <adrian.vondendriesch@credativ.de>  Thu, 10 Aug 2017 10:17:56 +0200

pgbackrest (1.20-1) unstable; urgency=medium

  * New Upstream release:
    - See http://www.pgbackrest.org/release.html#1.19
  * Bump Standards-Version to 4.0.0.
  * Disable libc test on big-endian systems (Closes: #865545).
    The current test implementation doesn't work on big-endian systems.
  * Drop patches merged by upstream.

 -- Adrian Vondendriesch <adrian.vondendriesch@credativ.de>  Wed, 28 Jun 2017 08:38:49 +0200

pgbackrest (1.19-1) unstable; urgency=medium

  * New Upstream release:
    - This release introduces S3 Support.
    - see http://www.pgbackrest.org/release.html#1.19 for more information.
  * d/rules: Run libc tests through dh_auto_test.
  * d/tests: Use -k to enable checksums for initdb in tests suite.
  * d/patches: Fix format in libc (%u vs %lu).
  * d/patches: Add upstream patch to fix libc alignment on 32 bit systems.

 -- Adrian Vondendriesch <adrian.vondendriesch@credativ.de>  Sat, 15 Apr 2017 11:34:48 +0200

pgbackrest (1.18-1) unstable; urgency=medium

  * New Upstream release.
    See http://www.pgbackrest.org/release.html#1.18
  * debian/tests: add a simple test suite.
    Thanks to Hendrik Siewert.

 -- Adrian Vondendriesch <adrian.vondendriesch@credativ.de>  Thu, 13 Apr 2017 15:54:51 +0200

pgbackrest (1.17-2) experimental; urgency=medium

  * Build the C-library without a packlist to make the build
    reproducible.

 -- Adrian Vondendriesch <adrian.vondendriesch@credativ.de>  Fri, 17 Mar 2017 22:32:04 +0100

pgbackrest (1.17-1) experimental; urgency=medium

  * New Upstream release.
    See http://www.pgbackrest.org/release.html#1.17

 -- Adrian Vondendriesch <adrian.vondendriesch@credativ.de>  Tue, 14 Mar 2017 07:59:05 +0100

pgbackrest (1.16-1) experimental; urgency=medium

  * New Upstream release.
    See http://www.pgbackrest.org/release.html#1.15.

 -- Adrian Vondendriesch <adrian.vondendriesch@credativ.de>  Fri, 03 Mar 2017 11:33:02 +0100

pgbackrest (1.15-1) experimental; urgency=medium

  * New Upstream release.
  * Build and ship new C-Library
  * Change architecture from all to any

 -- Adrian Vondendriesch <adrian.vondendriesch@credativ.de>  Sat, 11 Feb 2017 21:55:21 +0100

pgbackrest (1.12-1) unstable; urgency=medium

  * New Upstream release.
  * Update rules files to clean up build files.
  * Run wrap-and-sort.

 -- Adrian Vondendriesch <adrian.vondendriesch@credativ.de>  Thu, 15 Dec 2016 10:30:19 +0100

pgbackrest (1.11-1) unstable; urgency=medium

  * New Upstream release.

 -- Adrian Vondendriesch <adrian.vondendriesch@credativ.de>  Fri, 18 Nov 2016 08:16:24 +0100

pgbackrest (1.10-1) unstable; urgency=medium

  * New Upstream release.

 -- Adrian Vondendriesch <adrian.vondendriesch@credativ.de>  Thu, 10 Nov 2016 17:30:43 +0100

pgbackrest (1.09-1) unstable; urgency=medium

  * New Upstream release.

 -- Adrian Vondendriesch <adrian.vondendriesch@credativ.de>  Tue, 11 Oct 2016 09:01:49 +0200

pgbackrest (1.08-1) unstable; urgency=medium

  * New Upstream releaase.

 -- Adrian Vondendriesch <adrian.vondendriesch@credativ.de>  Thu, 15 Sep 2016 10:12:21 +0200

pgbackrest (1.07-1) unstable; urgency=medium

  * New Upstream release.

 -- Adrian Vondendriesch <adrian.vondendriesch@credativ.de>  Wed, 07 Sep 2016 14:39:04 +0200

pgbackrest (1.06-1) unstable; urgency=medium

  * New Upstream release.

 -- Adrian Vondendriesch <adrian.vondendriesch@credativ.de>  Fri, 26 Aug 2016 11:58:18 +0200

pgbackrest (1.04-2) unstable; urgency=medium

  * Change postinst behaviour. Only set permissions if
    no prior version was installed.

 -- Adrian Vondendriesch <adrian.vondendriesch@credativ.de>  Tue, 02 Aug 2016 11:34:57 +0200

pgbackrest (1.04-1) unstable; urgency=medium

  * New upstream release.

 -- Adrian Vondendriesch <adrian.vondendriesch@credativ.de>  Sat, 30 Jul 2016 16:47:25 +0200

pgbackrest (1.03-1) unstable; urgency=medium

  * New upstream release.

 -- Adrian Vondendriesch <adrian.vondendriesch@credativ.de>  Mon, 04 Jul 2016 07:54:34 +0200

pgbackrest (1.02-2) unstable; urgency=medium

  * Implicit use SOURCE_DATE_EPOCH in txt2man. Remove MANDATE.
  * Build docs with custom variable "html-footer" to get a reproducible
    build.

 -- Adrian Vondendriesch <adrian.vondendriesch@credativ.de>  Mon, 20 Jun 2016 14:02:52 +0200

pgbackrest (1.02-1) unstable; urgency=medium

  [ Adrian Vondendriesch ]
  * New upstream release.
  * Drop patches included in upstream version.
  * Ship manpage based on upstream template.
  * Change owner of pgbackrest.conf to postgres.
  * Change architecture from any to all.
  * Modify package description.
  * Remove PostgreSQL version from stanza example.

  [ Christoph Berg ]
  * debian/tests: Add simple "version" test.

 -- Adrian Vondendriesch <adrian.vondendriesch@credativ.de>  Mon, 13 Jun 2016 13:16:50 +0200

pgbackrest (1.01-1) unstable; urgency=medium

  * New upstream release.
  * Add libdbd-pg-perl to Depends.
  * Add postgresql-common to Depends.
  * Change owner of pgbackrest directories to postgres in postinst.
  * Bump standards version.
  * Create a pgbackrest-doc package which contains the html documentation.
  * Ship own manage.
  * patches:
    * add upstream sprintf patch
    * add upstream documentation patches

 -- Adrian Vondendriesch <adrian.vondendriesch@credativ.de>  Wed, 01 Jun 2016 20:57:29 +0200

pgbackrest (1.00-1) unstable; urgency=medium

  * New upstream release.
  * Rename config file from pg_backrest.conf to pgbackrest.conf.

 -- Adrian Vondendriesch <adrian.vondendriesch@credativ.de>  Tue, 03 May 2016 20:48:13 +0200

pgbackrest (0.9-1) unstable; urgency=medium

  * Initial release

 -- Adrian Vondendriesch <adrian.vondendriesch@credativ.de>  Sun, 13 Mar 2016 17:29:17 +0100
